Journal article · 2013 · Open access
Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies
Advanced materials research, 685, 68–75 · Published 1 April 2013 · DOI 10.4028/www.scientific.net/amr.685.68
In brief
“Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies” is a 2013 journal article by Salman Pervaiz and 4 co-authors, published in Advanced materials research. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.
- Citations
- 3
- Most cited in
- 2017 (1)
- References
- 19
- Authors
- 5
Abstract
Titanium alloys are labeled as difficult to materials because of their low machinability rating. This paper presents an experimental study of machining Ti-6Al-4V under turning operation. All machining tests were conducted under dry, mist and flood cooling approaches by using a TiAlN coated carbide cutting inserts. All cutting experiments were conducted using high and low levels of cutting speeds and feed rates. The study compared surface finish of machined surface and flank wear at cutting edge under dry, mist and flood cooling approaches. Scanning electron microscopy was utilized to investigate the flank wear at cutting edge under various cooling approaches and cutting conditions. Investigation revealed that TiAlN coated carbides performed comparatively better at higher cutting speed.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Pervaiz, S., Deiab, I. M., Darras, B. M., Rashid, A., & Nicolescu, C. M. (2013). Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies. Advanced materials research, 685, 68–75. https://doi.org/10.4028/www.scientific.net/amr.685.68
MLA 9
Pervaiz, Salman, et al. “Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies.” Advanced materials research, vol. 685, 2013, pp. 68–75. https://doi.org/10.4028/www.scientific.net/amr.685.68.
Chicago
Pervaiz, Salman, Ibrahim Mostafa Deiab, Basil M. Darras, Amir Rashid, and Cornel Mihai Nicolescu. 2013. “Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies.” Advanced materials research 685: 68–75. https://doi.org/10.4028/www.scientific.net/amr.685.68.
Harvard
Pervaiz, S. et al. (2013) ‘Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies’, Advanced materials research, 685, pp. 68–75. doi:10.4028/www.scientific.net/amr.685.68.
IEEE
S. Pervaiz, I. M. Deiab, B. M. Darras, A. Rashid, and C. M. Nicolescu, “Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies,” Advanced materials research, vol. 685, pp. 68–75, 2013, doi: 10.4028/www.scientific.net/amr.685.68.
BibTeX
@article{pervaiz2013performance,
title = {{Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies}},
author = {Pervaiz, Salman and Deiab, Ibrahim Mostafa and Darras, Basil M. and Rashid, Amir and Nicolescu, Cornel Mihai},
journal = {Advanced materials research},
year = {2013},
volume = {685},
pages = {68--75},
doi = {10.4028/www.scientific.net/amr.685.68},
url = {https://doi.org/10.4028/www.scientific.net/amr.685.68}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2017 | 1 | |
| 2018 | 1 | |
| 2021 | 1 |
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Ti-6Al-4V
- titanium alloy machining
- TiAlN coating
- dry machining
- mist cooling
- flood cooling
- turning
- surface finish
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Pervaiz, S., Deiab, I. M., Darras, B. M., Rashid, A., & Nicolescu, C. M. (2013). Performance Evaluation of TiAlN-PVD Coated Inserts for Machining Ti-6Al-4V under Different Cooling Strategies. Advanced materials research, 685, 68–75. https://doi.org/10.4028/www.scientific.net/amr.685.68
How many times has this paper been cited?
3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced materials research: sign in and open the full text from this page.
Who wrote this paper?
Salman Pervaiz, Ibrahim Mostafa Deiab, Basil M. Darras, Amir Rashid, Cornel Mihai Nicolescu.
What is the DOI of this paper?
10.4028/www.scientific.net/amr.685.68, permanently at https://doi.org/10.4028/www.scientific.net/amr.685.68. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.