Journal article · 2012 · Open access
Performance evaluation of cryogenic treated tools in turning
Advances in Production Engineering & Management, 7(3), 187–194 · Published 15 September 2012 · DOI 10.14743/apem2012.3.141
In brief
“Performance evaluation of cryogenic treated tools in turning” is a 2012 journal article by P.V. Gopal Krishna and 3 co-authors, published in Advances in Production Engineering & Management. OpenAlex counts 9 citations as of 22 November 2026. It is open access: the full text is free to read at Advances in Production Engineering & Management.
- Citations
- 9
- Most cited in
- 2014 (2)
- Field-weighted impact
- 1.44
- References
- 11
- Authors
- 4
Abstract
Tool wear is a worn portion over the flank and face of the tool.Tool wear is significant for determining tool life and hence it influences the machining economics.The wear measurements are carried by using a tool makers microscope in the present investigations.All the investigations are carried out using cutting fluid.Life enhancement by using cryogenic treatment on HSS is the objective of study.Investigations are carried on different work materials such as AISI 1040, EN8 and EN24.Improvement in tool life up to 90% is observed for soft material AISI 1040 and enhancement up to 39% is observed on EN24.These investigations are aimed at benefiting small industries that use aforementioned tool work combinations.Regression models are constructed for tool wear for both untreated machining and cryogenic treated machining.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Krishna, P. G., Kishore, K., Ramadevudu, G., & Sikandar, A. (2012). Performance evaluation of cryogenic treated tools in turning. Advances in Production Engineering & Management, 7(3), 187–194. https://doi.org/10.14743/apem2012.3.141
MLA 9
Krishna, P.V. Gopal, et al. “Performance evaluation of cryogenic treated tools in turning.” Advances in Production Engineering & Management, vol. 7, no. 3, 2012, pp. 187–194. https://doi.org/10.14743/apem2012.3.141.
Chicago
Krishna, P.V. Gopal, K. Kishore, G. Ramadevudu, and Ali Sikandar. 2012. “Performance evaluation of cryogenic treated tools in turning.” Advances in Production Engineering & Management 7 (3): 187–194. https://doi.org/10.14743/apem2012.3.141.
Harvard
Krishna, P. G. et al. (2012) ‘Performance evaluation of cryogenic treated tools in turning’, Advances in Production Engineering & Management, 7(3), pp. 187–194. doi:10.14743/apem2012.3.141.
IEEE
P. G. Krishna, K. Kishore, G. Ramadevudu, and A. Sikandar, “Performance evaluation of cryogenic treated tools in turning,” Advances in Production Engineering & Management, vol. 7, no. 3, pp. 187–194, 2012, doi: 10.14743/apem2012.3.141.
BibTeX
@article{krishna2012performance,
title = {{Performance evaluation of cryogenic treated tools in turning}},
author = {Krishna, P.V. Gopal and Kishore, K. and Ramadevudu, G. and Sikandar, Ali},
journal = {Advances in Production Engineering \& Management},
year = {2012},
volume = {7},
number = {3},
pages = {187--194},
doi = {10.14743/apem2012.3.141},
url = {https://doi.org/10.14743/apem2012.3.141}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2013 | 1 | |
| 2014 | 2 | |
| 2016 | 1 | |
| 2019 | 1 | |
| 2020 | 1 | |
| 2021 | 1 | |
| 2026 | 2 |
Its field-weighted citation impact is 1.44: it has been cited 1.44 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- cryogenic treatment
- tool wear
- tool life
- high-speed steel tools
- turning
- AISI 1040 steel
- EN8 steel
- EN24 steel
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Krishna, P. G., Kishore, K., Ramadevudu, G., & Sikandar, A. (2012). Performance evaluation of cryogenic treated tools in turning. Advances in Production Engineering & Management, 7(3), 187–194. https://doi.org/10.14743/apem2012.3.141
How many times has this paper been cited?
9 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advances in Production Engineering & Management: sign in and open the PDF from this page.
Who wrote this paper?
P.V. Gopal Krishna, K. Kishore, G. Ramadevudu, Ali Sikandar.
What is the DOI of this paper?
10.14743/apem2012.3.141, permanently at https://doi.org/10.14743/apem2012.3.141. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.