Journal article · 2020 · Open access

Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel

Nagraj Patil, Keshavanarayana Gopalakrishna, B Sangmesh

International Journal of Automotive and Mechanical Engineering, 17(1), 7709–7718 · Published 30 March 2020 · DOI 10.15282/ijame.17.1.2020.18.0573

Open full textCite this paper

In brief

“Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel” is a 2020 journal article by Nagraj Patil and 2 co-authors, published in International Journal of Automotive and Mechanical Engineering. OpenAlex counts 9 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at International Journal of Automotive and Mechanical Engineering.

Citations
9
Most cited in
2026 (3)
Field-weighted impact
0.35
Authors
3

Abstract

The cutting tool in the machining process plays an important role as it acts on the working material. There are a few methodologies have been persued to improve tool life, for example traditional cooling, single layer coating, multilayer coating, heat treatment process, nitrogen cooling and latest being the cryogenic treatment which reported a significant improvement in cutting tool life, chip morphology, reduction in heat generation. Hence, the cryogenic treatment is emerged as the sustainable machining process. This paper presents machining of AISI 304 steel using both cryogenic treated (CT) and untreated (UT) cutting tool insert. The commercially available uncoated carbide insert has been cryogenically treated at -196°C for 24 hours soaking period. The machining test has been conducted under four different cutting speeds. The material characterization of cutting insert is studied by using scanning electron microscopy (SEM), hardness test, and microscopic image analysis has been carried out before and after cryogenic treatment. The cutting tool performance is assessed in terms of of wear, cutting temperature, chip morphology, surface roughness under the influence of cryogenic machining and the results are contrast with UT one. The exploratory findings reveals that the deep cryogenic treatment (DCT) with 24 hours soaking period, performed better wear resistance and improved surface roughness of the cutting tool. Also considerable reduction in the flank wear, crater wear, cutting temperature is obtained and found improved chip morphology.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Patil, N., Gopalakrishna, K., & Sangmesh, B. (2020). Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel. International Journal of Automotive and Mechanical Engineering, 17(1), 7709–7718. https://doi.org/10.15282/ijame.17.1.2020.18.0573

MLA 9

Patil, Nagraj, et al. “Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel.” International Journal of Automotive and Mechanical Engineering, vol. 17, no. 1, 2020, pp. 7709–7718. https://doi.org/10.15282/ijame.17.1.2020.18.0573.

Chicago

Patil, Nagraj, Keshavanarayana Gopalakrishna, and B Sangmesh. 2020. “Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel.” International Journal of Automotive and Mechanical Engineering 17 (1): 7709–7718. https://doi.org/10.15282/ijame.17.1.2020.18.0573.

Harvard

Patil, N., Gopalakrishna, K. and Sangmesh, B. (2020) ‘Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel’, International Journal of Automotive and Mechanical Engineering, 17(1), pp. 7709–7718. doi:10.15282/ijame.17.1.2020.18.0573.

IEEE

N. Patil, K. Gopalakrishna, and B. Sangmesh, “Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel,” International Journal of Automotive and Mechanical Engineering, vol. 17, no. 1, pp. 7709–7718, 2020, doi: 10.15282/ijame.17.1.2020.18.0573.

BibTeX

@article{patil2020performance,
  title     = {{Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel}},
  author    = {Patil, Nagraj and Gopalakrishna, Keshavanarayana and Sangmesh, B},
  journal   = {International Journal of Automotive and Mechanical Engineering},
  year      = {2020},
  volume    = {17},
  number    = {1},
  pages     = {7709--7718},
  doi       = {10.15282/ijame.17.1.2020.18.0573},
  url       = {https://doi.org/10.15282/ijame.17.1.2020.18.0573}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202111
202322
202422
202511
202633

Its field-weighted citation impact is 0.35: it has been cited 0.35 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • cryogenic treatment
  • carbide inserts
  • 304 stainless steel
  • tool life
  • tool wear
  • flank wear
  • crater wear
  • cutting temperature

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Patil, N., Gopalakrishna, K., & Sangmesh, B. (2020). Performance Evaluation of Cryogenic Treated and Untreated Carbide Inserts during Machining of AISI 304 Steel. International Journal of Automotive and Mechanical Engineering, 17(1), 7709–7718. https://doi.org/10.15282/ijame.17.1.2020.18.0573

How many times has this paper been cited?

9 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at International Journal of Automotive and Mechanical Engineering: sign in and open the full text from this page.

Who wrote this paper?

Nagraj Patil, Keshavanarayana Gopalakrishna, B Sangmesh.

What is the DOI of this paper?

10.15282/ijame.17.1.2020.18.0573, permanently at https://doi.org/10.15282/ijame.17.1.2020.18.0573. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.