Journal article · 2019 · Open access

Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP

Muhammad Faishal, Muhammad Khrisna Putra

JMPM (Jurnal Material dan Proses Manufaktur), 3(2) · Published 1 January 2019 · DOI 10.18196/jmpm.3245

Open PDFView at the publisherCite this paper

In brief

“Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP” is a 2019 journal article by Muhammad Faishal and Muhammad Khrisna Putra, published in JMPM (Jurnal Material dan Proses Manufaktur). OpenAlex counts 6 citations as of 19 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at JMPM (Jurnal Material dan Proses Manufaktur).

Citations
6
Most cited in
2023 (4)
References
8
Authors
2

Abstract

Tata letak pabrik yang baik dapat menempatkan berbagai fasilitas dan peralatan fisik secara teratur sehingga mendukung pekerjaan berjalan secara produktif. Penelitian kali ini dilakukan di perusahaan yang memproduksi sandal spon sebagai fasilitas di penginapan. Perusahaan ini memiliki masalah yaitu pemborosan pada aliran material di beberapa area yang seharusnya tidak diperlukan seperti dari gudang ke proses pengeleman berjarak ± 50 m. selain itu juga masih terdapat lintasan yang bersimpangan seperti pada penjahitan cup ke penjahitan sol. Penelitian ini bertujuan untuk membuat tata letak fasilitas baru yang tepat dan baik untuk mengurangi pemborosan jarak material handling yang terjadi. Metode yang digunakan dalam penelitian ini menggunakan Computerized Relationship Layout Planning (CORELAP). Dengan membuat layout alternative sebanyak 5 dengan nilai score berbeda. Layout dengan score terkecil yang akan dipilih. Metode CORELAP merupakan metode construction yang mengubah data kualitatif menjadi data kuantitatif sehingga menentukan fasilitas pertama yang diletakkan didalam layout diperlukan data keterkaitan hubungan aktivitas. Hasil penelitian ini mendapatkan usulan tata letak fasilitas dengan CORELAP lternatif terpilih yang melakukan pengoptimalan dengan merubah 9 departemen sehingga mendapatkan pegurangan jarak total sebesar 46%, atau menjadi 125.8 m. A good layout can assign various facilities and physical equipment on a systematically to support activities running productively. This research was conducted at a company that manufactures sponge slippers as a facility at the inn. This company has a problem that is waste in the flow of material in some areas that should not be needed such as from the warehouse to the gluing process within ± 50 m. besides that, there are still crossing trajectories such as the sewing of the cup to the sewing of the sol. This study aims to make the layout of new facilities appropriate and good to reduce the waste of material handling distance that occurs. The method used in this study uses Computerized Relationship Layout Planning (CORELAP). By making alternative layouts of 5 with different score values. The layout with the smallest score will be chosen. CORELAP method is a construction method that converts qualitative data into quantitative data so as to determine the first facility that is placed in the layout, it requires data related to the activity relationship. The results of this study get a proposed layout of facilities with selected alternative CORELAP who optimize by changing 9 departments to get a reduction in a total distance of 46% or reduce until 125.8 m.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Faishal, M., & Putra, M. K. (2019). Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP. JMPM (Jurnal Material dan Proses Manufaktur), 3(2). https://doi.org/10.18196/jmpm.3245

MLA 9

Faishal, Muhammad, and Muhammad Khrisna Putra. “Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP.” JMPM (Jurnal Material dan Proses Manufaktur), vol. 3, no. 2, 2019. https://doi.org/10.18196/jmpm.3245.

Chicago

Faishal, Muhammad and Muhammad Khrisna Putra. 2019. “Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP.” JMPM (Jurnal Material dan Proses Manufaktur) 3 (2). https://doi.org/10.18196/jmpm.3245.

Harvard

Faishal, M. and Putra, M. K. (2019) ‘Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP’, JMPM (Jurnal Material dan Proses Manufaktur), 3(2). doi:10.18196/jmpm.3245.

IEEE

M. Faishal and M. K. Putra, “Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP,” JMPM (Jurnal Material dan Proses Manufaktur), vol. 3, no. 2, 2019, doi: 10.18196/jmpm.3245.

BibTeX

@article{faishal2019perancangan,
  title     = {{Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP}},
  author    = {Faishal, Muhammad and Putra, Muhammad Khrisna},
  journal   = {JMPM (Jurnal Material dan Proses Manufaktur)},
  year      = {2019},
  volume    = {3},
  number    = {2},
  doi       = {10.18196/jmpm.3245},
  url       = {https://doi.org/10.18196/jmpm.3245}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Manufacturing and Logistics Optimization

  • facility layout
  • CORELAP
  • material handling distance
  • layout optimization

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Faishal, M., & Putra, M. K. (2019). Perancangan Ulang Tataletak Fasilitas Industri Sandal dengan Metode CORELAP. JMPM (Jurnal Material dan Proses Manufaktur), 3(2). https://doi.org/10.18196/jmpm.3245

How many times has this paper been cited?

6 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at JMPM (Jurnal Material dan Proses Manufaktur): sign in and open the PDF from this page.

Who wrote this paper?

Muhammad Faishal, Muhammad Khrisna Putra.

What is the DOI of this paper?

10.18196/jmpm.3245, permanently at https://doi.org/10.18196/jmpm.3245. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.