Journal article · 2022 · Open access

Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ

Nyoto Sugiarto, Yan Orgianus, Asep Nana Rukmana

Bandung Conference Series Industrial Engineering Science, 2(1) · Published 20 January 2022 · DOI 10.29313/bcsies.v2i1.1439

Free PDFView at the publisherCite this paper

In brief

“Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ” is a 2022 journal article by Nyoto Sugiarto and 2 co-authors, published in Bandung Conference Series Industrial Engineering Science. OpenAlex counts 0 citations as of 15 November 2026. It is open access under a CC BY licence: the full text is free to read at Bandung Conference Series Industrial Engineering Science.

Citations
0
References
3
Authors
3

Abstract

PT XYZ is a company that produces motorcycle spare parts, one of its products is the stay comp ign coil. Currently the condition of the company is experiencing problems, namely a defect in the stay comp ign coil product. The purpose of the study was to identify the factors causing defects and provide suggestions for quality control of the stay comp ign coil product. The method used is Six Sigma with DMAIC cycle. Especially for the analyze stage using FMEA to calculate the value of the RPN. Meanwhile, at the improve stage, the FMEA process is used to propose corrective actions. The proposed design uses the 5W+1H. The results of this study indicate that there are 10 factors that cause a stay comp ign coil product defect, namely: an operator who is less careful, pins and blunt dies blades, unscheduled machine maintenance, not keeping the work desk clean, the presence of dirt deposits on the inside of the platting machine drum, drum capacity is too full, less coating liquid dosage, welding machine gun jammed, input current is too large and environmental conditions. There are 5 proposals for quality control of the stay comp ign coil product, namely: replacing a dull pin or die blade, performing regular machine maintenance, make SOPs that support work on the production of stay comp ign coils, maintain the cleanliness of the workbench in all parts of the stay comp ign coil production and supervisors carry out supervisory activities to the operator on a regular basis. Abstrak. PT XYZ adalah perusahaan yang memproduksi suku cadang sepeda motor, salah satu hasil produksinya adalah stay comp ign coil. Saat ini kondisi perusahaan sedang mengalami permasalahan yaitu adanya kecacatan pada produk stay comp ign coil. Tujuan penelitian ini adalah untuk mengidentifikasi faktor-faktor penyebab kecacatan dan memberikan usulan pengendalian kualitas terhadap produk stay comp ign coil. Metode yang digunakan adalah Six Sigma dengan siklus DMAIC (define, measure, analyze, improve dan control). Khusus untuk tahapan analyze menggunakan FMEA untuk menghitung nilai risk priority number (RPN). Sedangkan pada tahapan improve menggunakan FMEA proses untuk usulan tindakan perbaikan. Adapun usulan rancangan pengendalian kualitas menggunakan 5W+1H (What, Who, When, Where, dan How). Hasil dari penelitian ini mengiindikasikan ada 10 faktor penyebab terjadi kecacatan produk stay comp ign coil yakni: 1) opertor yang kurang teliti; 2) pin dies dan mata pisau dies yang tumpul; 3) kurang terjadwalnya maintenance mesin; 4) kurang menjaga kebersihan meja kerja; 5) adanya endapan kotoran dibagian dalam drum mesin platting; 6) kapasitas drum terlalu penuh; 7) takaran cairan pelapis kurang; 8)…

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Sugiarto, N., Orgianus, Y., & Rukmana, A. N. (2022). Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ. Bandung Conference Series Industrial Engineering Science, 2(1). https://doi.org/10.29313/bcsies.v2i1.1439

MLA 9

Sugiarto, Nyoto, et al. “Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ.” Bandung Conference Series Industrial Engineering Science, vol. 2, no. 1, 2022. https://doi.org/10.29313/bcsies.v2i1.1439.

Chicago

Sugiarto, Nyoto, Yan Orgianus, and Asep Nana Rukmana. 2022. “Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ.” Bandung Conference Series Industrial Engineering Science 2 (1). https://doi.org/10.29313/bcsies.v2i1.1439.

Harvard

Sugiarto, N., Orgianus, Y. and Rukmana, A. N. (2022) ‘Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ’, Bandung Conference Series Industrial Engineering Science, 2(1). doi:10.29313/bcsies.v2i1.1439.

IEEE

N. Sugiarto, Y. Orgianus, and A. N. Rukmana, “Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ,” Bandung Conference Series Industrial Engineering Science, vol. 2, no. 1, 2022, doi: 10.29313/bcsies.v2i1.1439.

BibTeX

@article{sugiarto2022pengendalian,
  title     = {{Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ}},
  author    = {Sugiarto, Nyoto and Orgianus, Yan and Rukmana, Asep Nana},
  journal   = {Bandung Conference Series Industrial Engineering Science},
  year      = {2022},
  volume    = {2},
  number    = {1},
  doi       = {10.29313/bcsies.v2i1.1439},
  url       = {https://doi.org/10.29313/bcsies.v2i1.1439}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Social Sciences › Business, Management and Accounting › Strategy and Management › Management and Optimization Techniques

  • defective products
  • quality control
  • Six Sigma DMAIC
  • failure mode and effects analysis
  • risk priority number
  • defect root cause analysis
  • equipment maintenance
  • operator supervision

Work with this paper

Most-cited papers in Business, Management and Accounting

All highly cited Business, Management and Accounting papers

Questions about this paper

How do I cite this paper in APA style?

Sugiarto, N., Orgianus, Y., & Rukmana, A. N. (2022). Pengendalian Kualitas Produk Stay Comp Ign Coil untuk Meminimasi Kecacatan Menggunakan Metode Six Sigma di PT XYZ. Bandung Conference Series Industrial Engineering Science, 2(1). https://doi.org/10.29313/bcsies.v2i1.1439

How many times has this paper been cited?

0 times, according to OpenAlex on 15 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Bandung Conference Series Industrial Engineering Science.

Who wrote this paper?

Nyoto Sugiarto, Yan Orgianus, Asep Nana Rukmana.

What is the DOI of this paper?

10.29313/bcsies.v2i1.1439. The permanent link is https://doi.org/10.29313/bcsies.v2i1.1439.

Bibliographic data from OpenAlex (CC0), last checked 15 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.