Journal article · 2018 · Open access

Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System

Laura N. Guevara, Roger J. Welsh, Mark A. Atwater

Metals, 8(4), 286 · Published 20 April 2018 · DOI 10.3390/met8040286

Free PDFView at the publisherCite this paper

In brief

“Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System” is a 2018 journal article by Laura N. Guevara and 2 co-authors, published in Metals. OpenAlex counts 10 citations as of 16 November 2026, which puts it in the top 9% of works published in 2018 by citations. It is open access under a CC BY licence: the full text is free to read at Metals.

Citations
10
Most cited in
2019 (4)
Field-weighted impact
0.52
References
40
Authors
3

Abstract

Mechanical alloying (MA) has been and continues to be thoroughly examined for creating structural materials, but the production of catalysts is relatively rare. This is especially true for catalysts used in the production of carbon nanofibers (CNFs), a versatile material for applications such as energy storage, catalyst support, advanced composites and others. The application of MA to create CNFs presents a valuable tool in reducing their cost and complexity, and thereby may increase their commercial potential. In this study, the effects of milling duration on CNF deposition are studied by the complementary methods of X-ray diffraction, compositional mapping, electron microscopy, particle size analysis and surface area analysis. These were used to determine microstructural and macroscale evolution of the catalyst powder and its effects on the kinetics and characteristics of carbon deposition using Ni and Ni 30 at % Cu. The results have important implications for low cost catalyst production and provide general guidance on the development of catalytic materials in miscible systems.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Guevara, L. N., Welsh, R. J., & Atwater, M. A. (2018). Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System. Metals, 8(4), 286. https://doi.org/10.3390/met8040286

MLA 9

Guevara, Laura N., et al. “Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System.” Metals, vol. 8, no. 4, 2018, p. 286. https://doi.org/10.3390/met8040286.

Chicago

Guevara, Laura N., Roger J. Welsh, and Mark A. Atwater. 2018. “Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System.” Metals 8 (4): 286. https://doi.org/10.3390/met8040286.

Harvard

Guevara, L. N., Welsh, R. J. and Atwater, M. A. (2018) ‘Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System’, Metals, 8(4), p. 286. doi:10.3390/met8040286.

IEEE

L. N. Guevara, R. J. Welsh, and M. A. Atwater, “Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System,” Metals, vol. 8, no. 4, p. 286, 2018, doi: 10.3390/met8040286.

BibTeX

@article{guevara2018parametric,
  title     = {{Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System}},
  author    = {Guevara, Laura N. and Welsh, Roger J. and Atwater, Mark A.},
  journal   = {Metals},
  year      = {2018},
  volume    = {8},
  number    = {4},
  pages     = {286},
  doi       = {10.3390/met8040286},
  url       = {https://doi.org/10.3390/met8040286}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201944
202022
202433
202611

Its field-weighted citation impact is 0.52: it has been cited 0.52 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Carbon Nanotubes in Composites

  • mechanical alloying
  • carbon nanofibers
  • Ni-Cu catalyst
  • copper-nickel alloys
  • milling time
  • carbon deposition kinetics
  • catalyst microstructure

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Guevara, L. N., Welsh, R. J., & Atwater, M. A. (2018). Parametric Effects of Mechanical Alloying on Carbon Nanofiber Catalyst Production in the Ni-Cu System. Metals, 8(4), 286. https://doi.org/10.3390/met8040286

How many times has this paper been cited?

10 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Metals.

Who wrote this paper?

Laura N. Guevara, Roger J. Welsh, Mark A. Atwater.

What is the DOI of this paper?

10.3390/met8040286. The permanent link is https://doi.org/10.3390/met8040286.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.