Journal article · 1990 · Open access

Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing

M. Heintze, André Catana, Philippe E. Schmid, Francis Lévy, PA Stadelmann, P Weiss

Journal of Physics D Applied Physics, 23(8), 1076–1081 · Published 14 August 1990 · DOI 10.1088/0022-3727/23/8/013

Free PDFView at the publisherCite this paper

In brief

“Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing” is a 1990 journal article by M. Heintze and 5 co-authors, published in Journal of Physics D Applied Physics. OpenAlex counts 16 citations as of 16 November 2026. It is open access: the full text is free to read at Journal of Physics D Applied Physics.

Citations
16
Most cited in
2022 (1)
Field-weighted impact
0.28
References
13
Authors
6

Abstract

The behaviour of oxygen impurities during rapid thermal processing of Ti/Si diffusion couples has been studied between 480 and 800 degrees C. Samples were prepared by sputter deposition of 40 nm of titanium of (001) silicon wafers which were then annealed in ambient argon. The investigation techniques included depth profiling using Auger electron spectroscopy, transmission electron microscopy, and electrical sheet resistance measurements. The oxygen impurity effects are mainly controlled by kinetic parameters, i.e. the silicide reaction rate and the oxygen diffusivity in titanium. At low temperatures, the oxygen contamination originating from the annealing furnace is the cause of major impurity effects. Below 550 degrees C the oxygen that spreads into the metal film blocks the silicide reaction while above 650 degrees C, silicide formation dominates over oxygen diffusion and contamination-free silicide is produced. From 550 to 600 degrees C, the competition between silicide reaction and oxygen diffusion results in the formation of a silicon-deficient, oxygen-rich Ti-Si-O sublayer on top of the silicide. This layer appears to be composed of TiO x and TiSi 2 . In some cases, all Ti is reacted but oxygen remains in the layer and the morphology of the silicide is strongly affected. In any case, the only crystalline silicide phase that forms is TiSi 2 , and not TiSi or Ti 5 Si 3 , as confirmed by electron diffraction and high-resolution electron microscopy.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Heintze, M., Catana, A., Schmid, P. E., Lévy, F., Stadelmann, P., & Weiss, P. (1990). Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing. Journal of Physics D Applied Physics, 23(8), 1076–1081. https://doi.org/10.1088/0022-3727/23/8/013

MLA 9

Heintze, M., et al. “Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing.” Journal of Physics D Applied Physics, vol. 23, no. 8, 1990, pp. 1076–1081. https://doi.org/10.1088/0022-3727/23/8/013.

Chicago

Heintze, M., André Catana, Philippe E. Schmid, Francis Lévy, PA Stadelmann, and P Weiss. 1990. “Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing.” Journal of Physics D Applied Physics 23 (8): 1076–1081. https://doi.org/10.1088/0022-3727/23/8/013.

Harvard

Heintze, M. et al. (1990) ‘Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing’, Journal of Physics D Applied Physics, 23(8), pp. 1076–1081. doi:10.1088/0022-3727/23/8/013.

IEEE

M. Heintze, A. Catana, P. E. Schmid, F. Lévy, P. Stadelmann, and P. Weiss, “Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing,” Journal of Physics D Applied Physics, vol. 23, no. 8, pp. 1076–1081, 1990, doi: 10.1088/0022-3727/23/8/013.

BibTeX

@article{heintze1990oxygen,
  title     = {{Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing}},
  author    = {Heintze, M. and Catana, André and Schmid, Philippe E. and Lévy, Francis and Stadelmann, PA and Weiss, P},
  journal   = {Journal of Physics D Applied Physics},
  year      = {1990},
  volume    = {23},
  number    = {8},
  pages     = {1076--1081},
  doi       = {10.1088/0022-3727/23/8/013},
  url       = {https://doi.org/10.1088/0022-3727/23/8/013}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202211
202411
202611

Its field-weighted citation impact is 0.28: it has been cited 0.28 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Semiconductor materials and interfaces

  • titanium silicide
  • thin film formation
  • oxygen impurities
  • rapid thermal annealing
  • TiSi2
  • titanium oxide
  • sheet resistance

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Heintze, M., Catana, A., Schmid, P. E., Lévy, F., Stadelmann, P., & Weiss, P. (1990). Oxygen impurity effects on the formation of thin titanium silicide films by rapid thermal annealing. Journal of Physics D Applied Physics, 23(8), 1076–1081. https://doi.org/10.1088/0022-3727/23/8/013

How many times has this paper been cited?

16 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Journal of Physics D Applied Physics.

Who wrote this paper?

M. Heintze, André Catana, Philippe E. Schmid, Francis Lévy, PA Stadelmann, P Weiss.

What is the DOI of this paper?

10.1088/0022-3727/23/8/013. The permanent link is https://doi.org/10.1088/0022-3727/23/8/013.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.