Journal article · 2026 · Open access

Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis

Svitlana Halaichak, Sergiy A. Korniy, М. B. Tymus, M. V. Danylchuk

Results in Surfaces and Interfaces, 25, 100977 · Published 15 September 2026 · DOI 10.1016/j.rsurfi.2026.100977

Open PDFView at the publisherCite this paper

In brief

“Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis” is a 2026 journal article by Svitlana Halaichak and 3 co-authors, published in Results in Surfaces and Interfaces. OpenAlex counts 0 citations as of 21 November 2026. It is open access under a CC BY licence: the full text is free to read at Results in Surfaces and Interfaces.

Citations
0
References
34
Authors
4

Abstract

Oxygen-containing Ni–Mo coatings were created via a one-step electrodeposition process and studied as electrocatalysts for the hydrogen evolution reaction in alkaline solution. The effects of deposition current density on chemical composition, surface morphology, electrochemically active surface area, and electrocatalytic efficiency were thoroughly investigated. Higher deposition current densities led to non-linear fluctuations in Mo content (ranging from 37.48 to 44.13 wt%) and a steady decline in oxygen content (from 18.36 to 7.82 wt%). Electrochemical tests in 1.0 M KOH revealed overpotentials of 130–160 mV at 100 mA/cm 2 and Tafel slopes of 83-109 mV/dec, suggesting a mixed Volmer–Heyrovsky reaction mechanism. The coating containing 41.56 wt% Mo and 9.22 wt% O exhibited the highest HER activity, with the lowest charge-transfer resistance (5.6 Ω cm2), the highest ECSA (113 cm 2 ), and the highest exchange current density. ECSA-normalized polarization curves showed that superior HER performance primarily stems from a higher density of electrochemically accessible active sites. XRD analysis indicated the formation of a nanocrystalline Ni(Mo) solid solution with oxygen-containing molybdenum species on the coating surface. The coating retained its electrocatalytic activity after 1000 cyclic voltammetry cycles and 12 h of chronopotentiometric testing. The combination of competitive HER activity, good electrochemical stability, and a simple electrodeposition route without post-treatment makes these oxygen-containing Ni–Mo coatings promising cathode materials for alkaline water electrolysis.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Halaichak, S., Korniy, S. A., Tymus, М. B., & Danylchuk, M. V. (2026). Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis. Results in Surfaces and Interfaces, 25, 100977. https://doi.org/10.1016/j.rsurfi.2026.100977

MLA 9

Halaichak, Svitlana, et al. “Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis.” Results in Surfaces and Interfaces, vol. 25, 2026, p. 100977. https://doi.org/10.1016/j.rsurfi.2026.100977.

Chicago

Halaichak, Svitlana, Sergiy A. Korniy, М. B. Tymus, and M. V. Danylchuk. 2026. “Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis.” Results in Surfaces and Interfaces 25: 100977. https://doi.org/10.1016/j.rsurfi.2026.100977.

Harvard

Halaichak, S. et al. (2026) ‘Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis’, Results in Surfaces and Interfaces, 25, p. 100977. doi:10.1016/j.rsurfi.2026.100977.

IEEE

S. Halaichak, S. A. Korniy, М. B. Tymus, and M. V. Danylchuk, “Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis,” Results in Surfaces and Interfaces, vol. 25, p. 100977, 2026, doi: 10.1016/j.rsurfi.2026.100977.

BibTeX

@article{halaichak2026oxygen,
  title     = {{Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis}},
  author    = {Halaichak, Svitlana and Korniy, Sergiy A. and Tymus, М. B. and Danylchuk, M. V.},
  journal   = {Results in Surfaces and Interfaces},
  year      = {2026},
  volume    = {25},
  pages     = {100977},
  doi       = {10.1016/j.rsurfi.2026.100977},
  url       = {https://doi.org/10.1016/j.rsurfi.2026.100977}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion

  • electrodeposition
  • hydrogen evolution reaction
  • alkaline water electrolysis
  • electrocatalysts
  • deposition current density
  • electrochemically active surface area
  • Volmer-Heyrovsky mechanism
  • solid solutions

Work with this paper

Most-cited papers in Energy

All highly cited Energy papers

Questions about this paper

How do I cite this paper in APA style?

Halaichak, S., Korniy, S. A., Tymus, М. B., & Danylchuk, M. V. (2026). Oxygen-containing Ni–Mo coatings via electrodeposition as high-performance cathodes for alkaline water electrolysis. Results in Surfaces and Interfaces, 25, 100977. https://doi.org/10.1016/j.rsurfi.2026.100977

How many times has this paper been cited?

0 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Results in Surfaces and Interfaces: sign in and open the PDF from this page.

Who wrote this paper?

Svitlana Halaichak, Sergiy A. Korniy, М. B. Tymus, M. V. Danylchuk.

What is the DOI of this paper?

10.1016/j.rsurfi.2026.100977, permanently at https://doi.org/10.1016/j.rsurfi.2026.100977. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.