Journal article · 2014 · Open access

Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile

Ke Shao-Ying, Chong Wang, Pan Tao, Peng He, Jie Yang, Yang Yu

Acta Physica Sinica, 63(2), 028802 · Published 1 January 2014 · DOI 10.7498/aps.63.028802

Read the free full textCite this paper

In brief

“Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile” is a 2014 journal article by Ke Shao-Ying and 5 co-authors, published in Acta Physica Sinica. OpenAlex counts 1 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Acta Physica Sinica.

Citations
1
Most cited in
2023 (1)
References
20
Authors
6

Abstract

The simulation program AMPS-1D (analysis of microelectronic and photonic structures) employed to simulate and compare the performances of hydrogenated amorphous silicon germanium (a-SiGe:H) thin film solar cell with and without band gap grading at a radiation of AM1.5G (100 mW/cm2) and room temperature by introducing energy band engineering. The simulation results show that the efficiency of the solar cell with band gap grading is 0.477% higher than that without band gap grading due to the higher open circuit voltage (Voc) and better fill factor (FF). Subsequently, a-SiGe:H thin film solar cells with three different window layers such as hydrogenated amorphous silicon (a-Si:H), hydrogenated amorphous silicon carbide (a-SiC:H) and hydrogenated nanocrystalline silicon (nc-Si:H) are simulated, respectively. The numeric calculation results indicate that the fermi level EF of the a-SiGe:H thin film solar cell crosses the valence band when nc-Si:H window layer is employed in the simulation. This will improve the conductivity and the open circuit voltage of the solar cell. In addition, the electric field at front contact interface is reduced due to the lower contact barrier height. This may be more beneficial to the carrier collection by front contact. On the other hand, thanks to the wider band-gap difference between the window layer and the intrinsic layer, a potential barrier is built at the valence-band p/i interface due to the band offset. This will hinder the hole migration and collection. Thus, an nc-Si:H buffer layer, which can relax the valence-band offset and be more beneficial to the carrier migration and collection, is introduced at p/i interface. Finally, the optimum conversion efficiency of the a-SiGe:H thin film solar cell with graded band gap is achieved to be 9.104%.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Shao-Ying, K., Wang, C., Tao, P., He, P., Yang, J., & Yu, Y. (2014). Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile. Acta Physica Sinica, 63(2), 028802. https://doi.org/10.7498/aps.63.028802

MLA 9

Shao-Ying, Ke, et al. “Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile.” Acta Physica Sinica, vol. 63, no. 2, 2014, p. 028802. https://doi.org/10.7498/aps.63.028802.

Chicago

Shao-Ying, Ke, Chong Wang, Pan Tao, Peng He, Jie Yang, and Yang Yu. 2014. “Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile.” Acta Physica Sinica 63 (2): 028802. https://doi.org/10.7498/aps.63.028802.

Harvard

Shao-Ying, K. et al. (2014) ‘Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile’, Acta Physica Sinica, 63(2), p. 028802. doi:10.7498/aps.63.028802.

IEEE

K. Shao-Ying, C. Wang, P. Tao, P. He, J. Yang, and Y. Yu, “Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile,” Acta Physica Sinica, vol. 63, no. 2, p. 028802, 2014, doi: 10.7498/aps.63.028802.

BibTeX

@article{shaoying2014optimization,
  title     = {{Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile}},
  author    = {Shao-Ying, Ke and Wang, Chong and Tao, Pan and He, Peng and Yang, Jie and Yu, Yang},
  journal   = {Acta Physica Sinica},
  year      = {2014},
  volume    = {63},
  number    = {2},
  pages     = {028802},
  doi       = {10.7498/aps.63.028802},
  url       = {https://doi.org/10.7498/aps.63.028802}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • hydrogenated amorphous silicon-germanium
  • graded band gap
  • band structure engineering
  • window layer
  • hydrogenated amorphous silicon
  • hydrogenated amorphous silicon carbide
  • hydrogenated nanocrystalline silicon
  • Fermi level

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Shao-Ying, K., Wang, C., Tao, P., He, P., Yang, J., & Yu, Y. (2014). Optimization design of hydrogenated amorphous silicon germanium thin film solar cell with graded band gap profile. Acta Physica Sinica, 63(2), 028802. https://doi.org/10.7498/aps.63.028802

How many times has this paper been cited?

1 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Acta Physica Sinica.

Who wrote this paper?

Ke Shao-Ying, Chong Wang, Pan Tao, Peng He, Jie Yang, Yang Yu.

What is the DOI of this paper?

10.7498/aps.63.028802. The permanent link is https://doi.org/10.7498/aps.63.028802.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.