Journal article · 2013 · Open access

Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah

Kah Song Tan, Noor Ajian Mohd-Lair, Stephen Yong Nai-Vun, James Yong Chau-Leong

Applied Mechanics and Materials, 315, 755–761 · Published 10 April 2013 · DOI 10.4028/www.scientific.net/amm.315.755

Read the free full textCite this paper

In brief

“Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah” is a 2013 journal article by Kah Song Tan and 3 co-authors, published in Applied Mechanics and Materials. OpenAlex counts 2 citations as of 15 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Mechanics and Materials.

Citations
2
Most cited in
2016 (1)
Field-weighted impact
0.57
References
5
Authors
4

Abstract

The general Facility Layout Problem deals with the arrangement of machines within the facility based on the constraints such as material flow distance, volume of flow of products, material handling cost and operation sequence of product. The facility layout problem is directly linked with the efficiency of the facility or the manufacturing line. The objective of this project is to design a simulation based methodology experiment on designing an optimized facility layout and evaluating the proposed alternative layouts using ARENA simulation. This project is conducted at Benteng Motor Sdn. Bhd. in Kota Kinabalu, Sabah. Currently, the company is planning to expand their manufacturing plant and hence the company needs an optimized facility layout to maximize the product capacity and manufacturing throughput time on a minimum utilization of resources environment. An eight steps simulation methodology is being proposed to design an optimized facility layout. A manufacturing re-engineering scenario has been developed to improve the existing system. The proposed scenario was evaluated using Arena simulation student package. The scenario has significantly increases the production capacity up to 225%, decrease the manufacturing throughput time by 19% as well as increase the utilization of majority of the manufacturing resources more than 200%.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Tan, K. S., Mohd-Lair, N. A., Nai-Vun, S. Y., & Chau-Leong, J. Y. (2013). Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah. Applied Mechanics and Materials, 315, 755–761. https://doi.org/10.4028/www.scientific.net/amm.315.755

MLA 9

Tan, Kah Song, et al. “Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah.” Applied Mechanics and Materials, vol. 315, 2013, pp. 755–761. https://doi.org/10.4028/www.scientific.net/amm.315.755.

Chicago

Tan, Kah Song, Noor Ajian Mohd-Lair, Stephen Yong Nai-Vun, and James Yong Chau-Leong. 2013. “Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah.” Applied Mechanics and Materials 315: 755–761. https://doi.org/10.4028/www.scientific.net/amm.315.755.

Harvard

Tan, K. S. et al. (2013) ‘Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah’, Applied Mechanics and Materials, 315, pp. 755–761. doi:10.4028/www.scientific.net/amm.315.755.

IEEE

K. S. Tan, N. A. Mohd-Lair, S. Y. Nai-Vun, and J. Y. Chau-Leong, “Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah,” Applied Mechanics and Materials, vol. 315, pp. 755–761, 2013, doi: 10.4028/www.scientific.net/amm.315.755.

BibTeX

@article{tan2013optimisation,
  title     = {{Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah}},
  author    = {Tan, Kah Song and Mohd-Lair, Noor Ajian and Nai-Vun, Stephen Yong and Chau-Leong, James Yong},
  journal   = {Applied Mechanics and Materials},
  year      = {2013},
  volume    = {315},
  pages     = {755--761},
  doi       = {10.4028/www.scientific.net/amm.315.755},
  url       = {https://doi.org/10.4028/www.scientific.net/amm.315.755}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Manufacturing and Logistics Optimization

  • facility layout optimization
  • automotive manufacturing
  • material handling cost
  • production capacity
  • resource utilization
  • Arena simulation
  • machine arrangement

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Tan, K. S., Mohd-Lair, N. A., Nai-Vun, S. Y., & Chau-Leong, J. Y. (2013). Optimisation of Facility Layout Problem at Automotive Industry a Case Study in Sabah. Applied Mechanics and Materials, 315, 755–761. https://doi.org/10.4028/www.scientific.net/amm.315.755

How many times has this paper been cited?

2 times, according to OpenAlex on 15 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Applied Mechanics and Materials.

Who wrote this paper?

Kah Song Tan, Noor Ajian Mohd-Lair, Stephen Yong Nai-Vun, James Yong Chau-Leong.

What is the DOI of this paper?

10.4028/www.scientific.net/amm.315.755. The permanent link is https://doi.org/10.4028/www.scientific.net/amm.315.755.

Bibliographic data from OpenAlex (CC0), last checked 15 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.