Dissertation · 2007 · Open access
Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency
Research Repository (Delft University of Technology) · Published 8 November 2007
In brief
“Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency” is a 2007 dissertation by Jimmy Melskens, published in Research Repository (Delft University of Technology). OpenAlex counts 0 citations as of 16 November 2026. It is open access: the full text is free to read at Research Repository (Delft University of Technology).
- Citations
- 0
- Authors
- 1
Abstract
In recent decades, the public awareness of the need for renewable energy sources has increased greatly. Considering the current climate changes, it is clear that today’s energy systems have to be radically transformed onto a more sustainable basis to avoid the otherwise very likely adverse effects of global warming on tomorrow’s society and economy. In this framework, solar cells offer an interesting alternative for large-scale electricity generation. The first-generation crystalline silicon (c-Si) solar cells, which still dominate the photovoltaic market, will likely not be used for such large-scale applications, because of the relatively large amounts of material that would be required for the fabrication. Thinfilm solar cells, such as hydrogenated amorphous silicon (a-Si:H) solar cells, have a great potential with respect to the costs, because much smaller amounts of material are needed in the fabrication process in comparison to c-Si solar cells. However, the typical conversion efficiency of an a-Si:H silicon solar cell is much lower than the typical conversion efficiency of a c-Si solar cell. Further, the performance of an a-Si:H solar cell degrades over time when the solar cell is exposed to light, which is not the case for c-Si solar cells. In an attempt to increase the conversion efficiency of thin-film solar cells, research interest moved towards multiple-junction solar cells, as opposed to the conventional single-junction solar cells, so a wider range of the solar spectrum could be absorbed. One particularly interesting multiple-junction solar cell is the so-called micromorph tandem solar cell, which consists of an a-Si:H top solar cell and a hydrogenated microcrystalline silicon (?c-Si:H) bottom solar cell. The interesting aspect of this particular multiple-junction solar cell is that both the bottom and the top solar cell can be produced from the same cheap base material: silicon. Both solar cells can be deposited by means of plasma-enhanced chemical vapour deposition (PECVD) from silane gas. To obtain a highly efficient a-Si:H solar cell for possible later use in a micromorph tandem solar cell, it will be attempted in this thesis to optimise the heart of the a-Si:H solar cell: the absorber layer. To obtain a stable material, a hydrogen-to-silane dilution ratio of 20 is used during the PECVD deposition of a-Si:H. The influence of various deposition parameters, such as the pressure, the rf-power, the silane flow, and the substrate temperature on the quality of films and absorber layers is investigated. Fourier Transform Photocurrent Spectroscopy is used to evaluate the quality of Si:H films and solar cell absorber layers, since from the obtained sub-band gap absorption coefficient spectrum…
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Melskens, J. (2007). Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency. Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:3b8d63b9-af07-4d2a-be62-4586139a347f
MLA 9
Melskens, Jimmy. “Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency.” Research Repository (Delft University of Technology), 2007. http://resolver.tudelft.nl/uuid:3b8d63b9-af07-4d2a-be62-4586139a347f.
Chicago
Melskens, Jimmy. 2007. “Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency.” Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:3b8d63b9-af07-4d2a-be62-4586139a347f.
Harvard
Melskens, J. (2007) ‘Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency’, Research Repository (Delft University of Technology). Available at: http://resolver.tudelft.nl/uuid:3b8d63b9-af07-4d2a-be62-4586139a347f.
IEEE
J. Melskens, “Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency,” Research Repository (Delft University of Technology), 2007.
BibTeX
@phdthesis{melskens2007optimisation,
title = {{Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency}},
author = {Melskens, Jimmy},
year = {2007},
url = {http://resolver.tudelft.nl/uuid:3b8d63b9-af07-4d2a-be62-4586139a347f}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- hydrogenated amorphous silicon
- multijunction solar cells
- thin-film solar cells
- hydrogen dilution ratio
- conversion efficiency
- light-induced degradation
- photostability
- Fourier transform photocurrent spectroscopy
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Melskens, J. (2007). Optimisation of a protocrystalline hydrogenated amorphous silicon top solar cell for highest stabilised efficiency. Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:3b8d63b9-af07-4d2a-be62-4586139a347f
How many times has this paper been cited?
0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Research Repository (Delft University of Technology).
Who wrote this paper?
Jimmy Melskens.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.