Journal article · 2018 · Open access

Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects

Chih-Hsing Liu, Ta-Lun Chen, Chen-Hua Chiu, Mao-Cheng Hsu, Yang Chen, Tzu-Yang Pai, Wei-Geng Peng, Yen-Pin Chiang

Soft Robotics, 5(4), 452–465 · Published 28 August 2018 · DOI 10.1089/soro.2017.0121

Open full textCite this paper

In brief

“Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects” is a 2018 journal article by Chih-Hsing Liu and 7 co-authors, published in Soft Robotics. OpenAlex counts 139 citations as of 22 November 2026, which puts it in the top 8% of works published in 2018 by citations. It is open access under a CC BY-NC licence: the full text is free to read at Soft Robotics.

Citations
139
Most cited in
2024 (27)
Field-weighted impact
3.64
References
52
Authors
8

Abstract

This study presents the design of an underactuated, two-finger, motor-driven compliant gripper for grasping size-varied unknown objects. The gripper module consists of one main frame structure and two identical compliant fingers. The compliant finger is a monolithic compliant mechanism synthesized using a topology optimization method, and then prototyped by 3D printing using flexible filament. The input port for each finger is mounted on a moving platform driven by a gear motor, whereas the fixed port of the finger is mounted on a fixed platform. Each compliant finger can be actuated through the linear motion of the moving platform, and can deform elastically to generate the grasping motion. To demonstrate the effectiveness of the proposed design, the gripper module is mounted on a six-axis robotic arm to pick and place a variety of objects. The results show that objects with the sizes between 42 and 141 mm can be grasped by the developed soft robotic gripper. The maximum payload for the gripper is 2.1 kg. The proposed compliant gripper is a low-cost design that can be used in grasping of size-varied vulnerable objects.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Liu, C.-H., Chen, T.-L., Chiu, C.-H., Hsu, M.-C., Chen, Y., Pai, T.-Y., Peng, W.-G., & Chiang, Y.-P. (2018). Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects. Soft Robotics, 5(4), 452–465. https://doi.org/10.1089/soro.2017.0121

MLA 9

Liu, Chih-Hsing, et al. “Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects.” Soft Robotics, vol. 5, no. 4, 2018, pp. 452–465. https://doi.org/10.1089/soro.2017.0121.

Chicago

Liu, Chih-Hsing, Ta-Lun Chen, Chen-Hua Chiu, Mao-Cheng Hsu, Yang Chen, Tzu-Yang Pai, Wei-Geng Peng, and Yen-Pin Chiang. 2018. “Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects.” Soft Robotics 5 (4): 452–465. https://doi.org/10.1089/soro.2017.0121.

Harvard

Liu, C.-H. et al. (2018) ‘Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects’, Soft Robotics, 5(4), pp. 452–465. doi:10.1089/soro.2017.0121.

IEEE

C.-H. Liu et al., “Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects,” Soft Robotics, vol. 5, no. 4, pp. 452–465, 2018, doi: 10.1089/soro.2017.0121.

BibTeX

@article{liu2018optimal,
  title     = {{Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects}},
  author    = {Liu, Chih-Hsing and Chen, Ta-Lun and Chiu, Chen-Hua and Hsu, Mao-Cheng and Chen, Yang and Pai, Tzu-Yang and Peng, Wei-Geng and Chiang, Yen-Pin},
  journal   = {Soft Robotics},
  year      = {2018},
  volume    = {5},
  number    = {4},
  pages     = {452--465},
  doi       = {10.1089/soro.2017.0121},
  url       = {https://doi.org/10.1089/soro.2017.0121}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201822
20191111
20201818
20211414
20221414
20231515
20242727
20252121
20261717

Its field-weighted citation impact is 3.64: it has been cited 3.64 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft gripper
  • compliant mechanisms
  • topology optimization
  • unknown object grasping
  • pick-and-place
  • payload capacity

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Liu, C.-H., Chen, T.-L., Chiu, C.-H., Hsu, M.-C., Chen, Y., Pai, T.-Y., Peng, W.-G., & Chiang, Y.-P. (2018). Optimal Design of a Soft Robotic Gripper for Grasping Unknown Objects. Soft Robotics, 5(4), 452–465. https://doi.org/10.1089/soro.2017.0121

How many times has this paper been cited?

139 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Soft Robotics: sign in and open the full text from this page.

Who wrote this paper?

Chih-Hsing Liu, Ta-Lun Chen, Chen-Hua Chiu, Mao-Cheng Hsu, Yang Chen, Tzu-Yang Pai, Wei-Geng Peng, Yen-Pin Chiang.

What is the DOI of this paper?

10.1089/soro.2017.0121, permanently at https://doi.org/10.1089/soro.2017.0121. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.