Preprint · 2026 · Open access

Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method

Sara Adeli, Hassan Sayyaadi

arXiv (Cornell University) · Published 2 June 2026 · DOI 10.48550/arxiv.2606.03798

Open PDFView at the publisherCite this paper

In brief

“Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method” is a 2026 preprint by Sara Adeli and Hassan Sayyaadi, published in arXiv (Cornell University). OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at arXiv (Cornell University).

Citations
0
References
30
Authors
2

Abstract

Fin Ray-inspired soft grippers offer a promising solution for gently handling delicate, irregular objects, especially in agriculture. The objective of this research is to design, fabricate, and model a Fin Ray Effect (FRE) soft gripper finger to enable precise force control in future applications. This design aims to gently grasp delicate agricultural products, such as tomatoes, that require both adaptability and accurate force application. To address the inherent challenges of soft robotics, including nonlinear behavior, infinite degrees of freedom, and variable material properties, the Finite Rigid Elements Method (FREM) was employed for modeling. This method preserves analytical accuracy while providing a reliable foundation for the development of a force controller in later stages. A detailed Finite Element Model (FEM) was created using ANSYS, and the analytical results were validated through simulation and experimental testing. The gripper's fingers were optimized based on four key criteria: tip displacement, total deflection, stress distribution, and contact force. The optimal finger configuration includes a length of 30 mm, rib spacing of 10 mm, seven ribs angled at -15 deg, and a rib thickness of 1 mm. Theoretical modeling using the FREM predicted finger deformation with a 3% error, while the ANSYS numerical model achieved 2% error.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Adeli, S., & Sayyaadi, H. (2026). Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method. arXiv (Cornell University). https://doi.org/10.48550/arxiv.2606.03798

MLA 9

Adeli, Sara, and Hassan Sayyaadi. “Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method.” arXiv (Cornell University), 2026. https://doi.org/10.48550/arxiv.2606.03798.

Chicago

Adeli, Sara and Hassan Sayyaadi. 2026. “Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method.” arXiv (Cornell University). https://doi.org/10.48550/arxiv.2606.03798.

Harvard

Adeli, S. and Sayyaadi, H. (2026) ‘Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method’, arXiv (Cornell University). doi:10.48550/arxiv.2606.03798.

IEEE

S. Adeli and H. Sayyaadi, “Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method,” arXiv (Cornell University), 2026, doi: 10.48550/arxiv.2606.03798.

BibTeX

@misc{adeli2026optimal,
  title     = {{Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method}},
  author    = {Adeli, Sara and Sayyaadi, Hassan},
  howpublished = {arXiv (Cornell University)},
  year      = {2026},
  doi       = {10.48550/arxiv.2606.03798},
  url       = {https://doi.org/10.48550/arxiv.2606.03798}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • analytical model
  • shape optimization
  • delicate object grasping
  • contact force
  • stress distribution
  • deflection
  • force control

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Adeli, S., & Sayyaadi, H. (2026). Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method. arXiv (Cornell University). https://doi.org/10.48550/arxiv.2606.03798

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at arXiv (Cornell University): sign in and open the PDF from this page.

Who wrote this paper?

Sara Adeli, Hassan Sayyaadi.

What is the DOI of this paper?

10.48550/arxiv.2606.03798, permanently at https://doi.org/10.48550/arxiv.2606.03798. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.