Journal article · 2018 · Open access

On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications

M. Torres Melgarejo, Maximilian Darnieder, Sebastian Linß, Lena Zentner, Thomas Fröhlich, René Theska

Actuators, 7(4), 86 · Published 6 December 2018 · DOI 10.3390/act7040086

Open PDFView at the publisherCite this paper

In brief

“On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications” is a 2018 journal article by M. Torres Melgarejo and 5 co-authors, published in Actuators. OpenAlex counts 21 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Actuators.

Citations
21
Most cited in
2020 (4)
Field-weighted impact
0.71
References
33
Authors
6

Abstract

Compliant mechanisms based on flexure hinges are widely used in precision engineering applications. Among those are devices such as precision balances and mass comparators with achievable resolutions and uncertainties in the nano-newton range. The exact knowledge of the mechanical properties of notch hinges and their modeling is essential for the design and the goal-oriented adjustment of these devices. It is shown in this article that many analytical equations available in the literature for calculating the bending stiffness of thin semi-circular flexure hinges cause deviations of up to 12% compared to simulation results based on the three-dimensional finite element model for the considered parameter range. A close examination of the stress state within the loaded hinge reveals possible reasons for this deviation. The article explains this phenomenon in detail and shows the limitations of existing analytical models depending on specific geometric ratios. An accurate determination of the bending stiffness of semi-circular flexure hinges in a wide range of geometric parameters without the need for an elaborate finite element analysis is proposed in form of FEM-based correction factors for analytical equations referring to Euler-Bernoulli’s beam theory.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Melgarejo, M. T., Darnieder, M., Linß, S., Zentner, L., Fröhlich, T., & Theska, R. (2018). On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications. Actuators, 7(4), 86. https://doi.org/10.3390/act7040086

MLA 9

Melgarejo, M. Torres, et al. “On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications.” Actuators, vol. 7, no. 4, 2018, p. 86. https://doi.org/10.3390/act7040086.

Chicago

Melgarejo, M. Torres, Maximilian Darnieder, Sebastian Linß, Lena Zentner, Thomas Fröhlich, and René Theska. 2018. “On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications.” Actuators 7 (4): 86. https://doi.org/10.3390/act7040086.

Harvard

Melgarejo, M. T. et al. (2018) ‘On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications’, Actuators, 7(4), p. 86. doi:10.3390/act7040086.

IEEE

M. T. Melgarejo, M. Darnieder, S. Linß, L. Zentner, T. Fröhlich, and R. Theska, “On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications,” Actuators, vol. 7, no. 4, p. 86, 2018, doi: 10.3390/act7040086.

BibTeX

@article{melgarejo2018modeling,
  title     = {{On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications}},
  author    = {Melgarejo, M. Torres and Darnieder, Maximilian and Linß, Sebastian and Zentner, Lena and Fröhlich, Thomas and Theska, René},
  journal   = {Actuators},
  year      = {2018},
  volume    = {7},
  number    = {4},
  pages     = {86},
  doi       = {10.3390/act7040086},
  url       = {https://doi.org/10.3390/act7040086}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202044
202111
202244
202333
202444
202522
202622

Its field-weighted citation impact is 0.71: it has been cited 0.71 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Control and Systems Engineering › Piezoelectric Actuators and Control

  • bending stiffness
  • compliant mechanisms
  • precision balance
  • mass comparator
  • stress state
  • Euler-Bernoulli beam
  • analytical stiffness model
  • correction factors

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Melgarejo, M. T., Darnieder, M., Linß, S., Zentner, L., Fröhlich, T., & Theska, R. (2018). On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications. Actuators, 7(4), 86. https://doi.org/10.3390/act7040086

How many times has this paper been cited?

21 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Actuators: sign in and open the PDF from this page.

Who wrote this paper?

M. Torres Melgarejo, Maximilian Darnieder, Sebastian Linß, Lena Zentner, Thomas Fröhlich, René Theska.

What is the DOI of this paper?

10.3390/act7040086, permanently at https://doi.org/10.3390/act7040086. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.