Journal article · 2011 · Open access

On mechanical properties of planar flexure hinges of compliant mechanisms

Frank Dirksen, Rolf Lammering

Mechanical sciences, 2(1), 109–117 · Published 6 June 2011 · DOI 10.5194/ms-2-109-2011

Open PDFView at the publisherCite this paper

In brief

“On mechanical properties of planar flexure hinges of compliant mechanisms” is a 2011 journal article by Frank Dirksen and Rolf Lammering, published in Mechanical sciences. OpenAlex counts 53 citations as of 22 November 2026, which puts it in the top 8% of works published in 2011 by citations. It is open access under a CC BY licence: the full text is free to read at Mechanical sciences.

Citations
53
Most cited in
2024 (7)
Field-weighted impact
7.73
References
25
Authors
2

Abstract

The synthesis of compliant mechanisms yield optimized topologies that combine several stiff parts with highly elastic flexure hinges. The hinges are often represented in finite element analysis by a single node (one-node hinge) leaving doubts on the physical meaning as well as an uncertainty in the manufacturing process. To overcome this one-node hinge problem of optimized compliant mechanisms' topologies, one-node hinges need to be replaced by real flexure hinges providing desired deflection range and the ability to bear internal loads without failure. Therefore, several common types of planar flexure hinges with different geometries are characterized and categorized in this work providing a comprehensive guide with explicit analytical expressions to replace one-node hinges effectively. Analytical expressions on displacements, stresses, maximum elastic deformations, bending stiffness, center of rotation and first natural frequencies are derived in this work. Numerical simulations and experimental studies are performed validating the analytical results. More importance is given to practice-oriented flexure hinge types in terms of cost-saving manufacturability, i.e. circular notch type hinges and rectangular leaf type hinges.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Dirksen, F., & Lammering, R. (2011). On mechanical properties of planar flexure hinges of compliant mechanisms. Mechanical sciences, 2(1), 109–117. https://doi.org/10.5194/ms-2-109-2011

MLA 9

Dirksen, Frank, and Rolf Lammering. “On mechanical properties of planar flexure hinges of compliant mechanisms.” Mechanical sciences, vol. 2, no. 1, 2011, pp. 109–117. https://doi.org/10.5194/ms-2-109-2011.

Chicago

Dirksen, Frank and Rolf Lammering. 2011. “On mechanical properties of planar flexure hinges of compliant mechanisms.” Mechanical sciences 2 (1): 109–117. https://doi.org/10.5194/ms-2-109-2011.

Harvard

Dirksen, F. and Lammering, R. (2011) ‘On mechanical properties of planar flexure hinges of compliant mechanisms’, Mechanical sciences, 2(1), pp. 109–117. doi:10.5194/ms-2-109-2011.

IEEE

F. Dirksen and R. Lammering, “On mechanical properties of planar flexure hinges of compliant mechanisms,” Mechanical sciences, vol. 2, no. 1, pp. 109–117, 2011, doi: 10.5194/ms-2-109-2011.

BibTeX

@article{dirksen2011mechanical,
  title     = {{On mechanical properties of planar flexure hinges of compliant mechanisms}},
  author    = {Dirksen, Frank and Lammering, Rolf},
  journal   = {Mechanical sciences},
  year      = {2011},
  volume    = {2},
  number    = {1},
  pages     = {109--117},
  doi       = {10.5194/ms-2-109-2011},
  url       = {https://doi.org/10.5194/ms-2-109-2011}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201744
201855
201933
202022
202122
202222
202366
202477
202533
202622

Its field-weighted citation impact is 7.73: it has been cited 7.73 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering

  • compliant mechanisms
  • closed-form expressions
  • bending stiffness
  • center of rotation
  • natural frequencies
  • elastic deformation
  • manufacturability

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Dirksen, F., & Lammering, R. (2011). On mechanical properties of planar flexure hinges of compliant mechanisms. Mechanical sciences, 2(1), 109–117. https://doi.org/10.5194/ms-2-109-2011

How many times has this paper been cited?

53 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Mechanical sciences: sign in and open the PDF from this page.

Who wrote this paper?

Frank Dirksen, Rolf Lammering.

What is the DOI of this paper?

10.5194/ms-2-109-2011, permanently at https://doi.org/10.5194/ms-2-109-2011. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.