Conference paper · 2018 · Open access
Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank
IOP Conference Series Materials Science and Engineering, 382, 042028 · Published 1 July 2018 · DOI 10.1088/1757-899x/382/4/042028
In brief
“Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank” is a 2018 conference paper by Qiuxiang Bu and Yue Wang, published in IOP Conference Series Materials Science and Engineering. OpenAlex counts 2 citations as of 18 November 2026. It is open access under a CC BY licence: the full text is free to read at IOP Conference Series Materials Science and Engineering.
- Citations
- 2
- Most cited in
- 2022 (1)
- References
- 14
- Authors
- 2
Abstract
The software of CFD FLUENT was used to simulate the strengthening characteristics of three-bent-bladed turbine in solid-liquid suspension system. Diameter of stirred tank is T = 100 mm . Four baffles are evenly distributed in the tank and two-phase material selection of glass ball-water system. Particle diameter is 250 μm and solid volume fraction is 15%. The standard dual equation model is adopted in the liquid turbulence model. The Euler multiphase flow model is applied to simulate the suspension process. The strengthening effect of the impeller’s upturned angle is discussed on solid suspension, and the radial velocity and solid volume concentration distribution of solid particles are analyzed, respectively. The results showed that, compared with 30 degrees of upturned angle of three-bent-bladed turbine(30°UA-3BT), the axial velocity of solid particles did not increase significantly with 20 degrees of upturned angle of three-bent-bladed turbine(20°UA-3BT) in the stirred tank. But distribution of solid volume concentration was more uniform, which reduced the accumulation of solid particles at the bottom of tank and the clean area of the top of stirred tank. 20°UA-3BT is beneficial to the full mixing of solid and liquid. Therefore, the turbine has a good application prospect.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Bu, Q., & Wang, Y. (2018). Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank. IOP Conference Series Materials Science and Engineering, 382, 042028. https://doi.org/10.1088/1757-899x/382/4/042028
MLA 9
Bu, Qiuxiang, and Yue Wang. “Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank.” IOP Conference Series Materials Science and Engineering, vol. 382, 2018, p. 042028. https://doi.org/10.1088/1757-899x/382/4/042028.
Chicago
Bu, Qiuxiang and Yue Wang. 2018. “Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank.” IOP Conference Series Materials Science and Engineering 382: 042028. https://doi.org/10.1088/1757-899x/382/4/042028.
Harvard
Bu, Q. and Wang, Y. (2018) ‘Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank’, IOP Conference Series Materials Science and Engineering, 382, p. 042028. doi:10.1088/1757-899x/382/4/042028.
IEEE
Q. Bu and Y. Wang, “Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank,” IOP Conference Series Materials Science and Engineering, vol. 382, p. 042028, 2018, doi: 10.1088/1757-899x/382/4/042028.
BibTeX
@inproceedings{bu2018numerical,
title = {{Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank}},
author = {Bu, Qiuxiang and Wang, Yue},
booktitle = {IOP Conference Series Materials Science and Engineering},
year = {2018},
volume = {382},
pages = {042028},
doi = {10.1088/1757-899x/382/4/042028},
url = {https://doi.org/10.1088/1757-899x/382/4/042028}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Fluid Dynamics and Mixing
- stirred tank reactor
- solid-liquid suspensions
- Eulerian multiphase flow
- particle velocity
- solid volume fraction
Work with this paper
Most-cited papers in Chemical Engineering
- Viscoelastic Properties of PolymersJohn D. Ferry, Henry S. Myers · Journal of The Electrochemical Society · 1961 · 13,517 citations
- Chemical Reaction EngineeringOctave Levenspiel · Industrial & Engineering Chemistry Research · 1999 · 10,032 citations
- The theory of polymer dynamicsMasao Doi, Sam F Edwards · 1986 · 8,928 citations
- Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and EngineeringGeorge W. Huber, Sara Iborra, Avelino Corma · Chemical Reviews · 2006 · 7,825 citations
- Convective Transport in NanofluidsJacopo Buongiorno · ASME Journal of Heat and Mass Transfer · 2005 · 7,131 citations
Questions about this paper
How do I cite this paper in APA style?
Bu, Q., & Wang, Y. (2018). Numerical simulation of solid-liquid suspension characteristics induced by three-bent-bladed turbine in stirred tank. IOP Conference Series Materials Science and Engineering, 382, 042028. https://doi.org/10.1088/1757-899x/382/4/042028
How many times has this paper been cited?
2 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at IOP Conference Series Materials Science and Engineering: sign in and open the PDF from this page.
Who wrote this paper?
Qiuxiang Bu, Yue Wang.
What is the DOI of this paper?
10.1088/1757-899x/382/4/042028, permanently at https://doi.org/10.1088/1757-899x/382/4/042028. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.