Journal article · 2026 · Open access
Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance
Coatings, 16(4), 457 · Published 10 April 2026 · DOI 10.3390/coatings16040457
In brief
“Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance” is a 2026 journal article by Longchen Zhao and 8 co-authors, published in Coatings. OpenAlex counts 1 citations as of 17 November 2026, which puts it in the top 9% of works published in 2026 by citations. It is open access under a CC BY licence: the full text is free to read at Coatings.
- Citations
- 1
- Most cited in
- 2026 (1)
- Field-weighted impact
- 1.46
- References
- 18
- Authors
- 9
Abstract
To improve the adhesion and tribological performance of diamond-like carbon (DLC) coatings on steel substrate, a Ti-enhanced plasma nitriding (PNTi) layer was formed on the surface of 38CrMoAl steel, followed by deposition of a Cr-based interlayer (mainly CrN) and then a W interlayer. Finally, a DLC coating was deposited, resulting in a novel PNTi/DLC coating. For comparison, a conventional PN/DLC coating was prepared under the same processing conditions. Optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, hardness tests, and tribological experiments were performed to systematically investigate the effect of TiN-enriched PNTi supporting layer on the performances of the PNTi/DLC composite coating. The results show that comparing with PN/DLC composite coating, the critical load (Lc2) of the PNTi/DLC coating was increased from 28.89 N to 43.25 N—about a 50% enhancement. The microhardness was increased from 2650 HV0.05 to 4400 HV0.05 (corresponding to 28.2 GPa to 44.1 GPa). The friction coefficient was decreased from 0.28 to 0.11, about a 60% reduction, and the wear rate declined more than 40%, from 4.81 × 10−6 to 2.90 × 10−6 mm3·N−1·m−1. The introduction of Ti promoted the in situ formation of TiN phase in the nitrided layer, which significantly improved the compactness of the nitrided layer and the adhesion at the film–substrate interface. Consequently, the PNTi/DLC composite coating exhibited excellent wear resistance and friction stability under high-load and severe tribological conditions. This study provides a promising perspective for engineering applications of steel-based DLC coatings in harsh service environments.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Zhao, L., Wu, J., Qi, L., Hu, J. W., An, X., Liu, X., Wang, D., Liu, X., & Wei, K. (2026). Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance. Coatings, 16(4), 457. https://doi.org/10.3390/coatings16040457
MLA 9
Zhao, Longchen, et al. “Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance.” Coatings, vol. 16, no. 4, 2026, p. 457. https://doi.org/10.3390/coatings16040457.
Chicago
Zhao, Longchen, Jiqiang Wu, Lin Qi, Jing Wei Hu, Xulong An, Xilang Liu, DanDan Wang, Xi Liu, and Kunxia Wei. 2026. “Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance.” Coatings 16 (4): 457. https://doi.org/10.3390/coatings16040457.
Harvard
Zhao, L. et al. (2026) ‘Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance’, Coatings, 16(4), p. 457. doi:10.3390/coatings16040457.
IEEE
L. Zhao et al., “Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance,” Coatings, vol. 16, no. 4, p. 457, 2026, doi: 10.3390/coatings16040457.
BibTeX
@article{zhao2026novel,
title = {{Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance}},
author = {Zhao, Longchen and Wu, Jiqiang and Qi, Lin and Hu, Jing Wei and An, Xulong and Liu, Xilang and Wang, DanDan and Liu, Xi and Wei, Kunxia},
journal = {Coatings},
year = {2026},
volume = {16},
number = {4},
pages = {457},
doi = {10.3390/coatings16040457},
url = {https://doi.org/10.3390/coatings16040457}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon films
- composite coatings
- coating adhesion
- wear resistance
- 38CrMoAl steel
- tungsten interlayer
- microhardness
- friction coefficient
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Zhao, L., Wu, J., Qi, L., Hu, J. W., An, X., Liu, X., Wang, D., Liu, X., & Wei, K. (2026). Novel Ti-Enhanced Plasma Nitriding (PNTi)/Diamond-like Carbon (DLC) Composite Coating with Strong Adhesion Strength and Excellent Wear Resistance. Coatings, 16(4), 457. https://doi.org/10.3390/coatings16040457
How many times has this paper been cited?
1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Coatings: sign in and open the full text from this page.
Who wrote this paper?
Longchen Zhao, Jiqiang Wu, Lin Qi, Jing Wei Hu, Xulong An, Xilang Liu, DanDan Wang, Xi Liu, Kunxia Wei.
What is the DOI of this paper?
10.3390/coatings16040457, permanently at https://doi.org/10.3390/coatings16040457. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.