Paper · 2015
等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究
Institute of Process Engineering, CAS Institutional Repository, 44(6), 27–31 · Published 1 January 2015 · DOI 10.16490/j.cnki.issn.1001-3660.2015.06.006
In brief
“等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究” is a 2015 paper by 曹玉霞 and 4 co-authors, published in Institute of Process Engineering, CAS Institutional Repository. OpenAlex counts 1 citations as of 17 November 2026. The publisher's version is not open access, and OpenAlex records no free legal copy.
- Citations
- 1
- Most cited in
- 2018 (1)
- Field-weighted impact
- 0.15
- Authors
- 5
Abstract
目的加入hBN作为固体润滑剂,提高NiCr/Cr_3C_2复合涂层的摩擦性能。方法采用化工冶金包覆、喷雾造粒和固相合金化技术制备NiCr/Cr_3C_2-10%hBN复合粉体,再采用等离子喷涂技术制备复合涂层。通过扫描电子显微镜(SEM)、X射线衍射(XRD)和高温摩擦磨损试验等手段研究粉体和涂层的显微结构、物相组成以及室温至800 ℃的摩擦磨损性能,探讨NiCr/Cr_3C_2-10%hBN复合涂层在室温和400,800 ℃下的磨损机理。结果等离子喷涂NiCr/Cr_3C_2-10%hBN复合涂层呈典型的层状结构,涂层结合强度可达24 MPa,孔隙率为(8.47±0.5)%。涂层的摩擦系数和磨损率均随着温度的升高而先升高,后逐渐降低,400 ℃时最高,分别约为0.59和9.2×10~(-4) mm~3/(N·m),800 ℃时分别降至0.45和4.1×10~(-4) mm~3/(N·m)。高温下,hBN润滑膜和金属氧化物的形成是摩擦系数和磨损率降低的主要原因。室温下涂层的主要磨损机制是脆性断裂;400 ℃时,涂层的主要磨损机制是脆性断裂、塑形变形和轻微粘着磨损;800 ℃时,涂层的主要磨损机制是塑性变形、氧化、粘着磨损和涂层转移至对偶件。结论等离子喷涂NiCr/Cr_3C_2-10%hBN复合涂层在室温和高温下的润滑性能较好。 Read the full abstract at the publisher.
Excerpt. This paper is not open access.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
曹玉霞, 黄传兵, 杜令忠, 张伟刚, & 兰叶. (2015). 等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究. Institute of Process Engineering, CAS Institutional Repository, 44(6), 27–31. https://doi.org/10.16490/j.cnki.issn.1001-3660.2015.06.006
MLA 9
曹玉霞, et al. “等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究.” Institute of Process Engineering, CAS Institutional Repository, vol. 44, no. 6, 2015, pp. 27–31. https://doi.org/10.16490/j.cnki.issn.1001-3660.2015.06.006.
Chicago
曹玉霞, 黄传兵, 杜令忠, 张伟刚, and 兰叶. 2015. “等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究.” Institute of Process Engineering, CAS Institutional Repository 44 (6): 27–31. https://doi.org/10.16490/j.cnki.issn.1001-3660.2015.06.006.
Harvard
曹玉霞 et al. (2015) ‘等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究’, Institute of Process Engineering, CAS Institutional Repository, 44(6), pp. 27–31. doi:10.16490/j.cnki.issn.1001-3660.2015.06.006.
IEEE
曹玉霞, 黄传兵, 杜令忠, 张伟刚, and 兰叶, “等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究,” Institute of Process Engineering, CAS Institutional Repository, vol. 44, no. 6, pp. 27–31, 2015, doi: 10.16490/j.cnki.issn.1001-3660.2015.06.006.
BibTeX
@article{2015nicr,
title = {{等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究}},
author = {曹玉霞 and 黄传兵 and 杜令忠 and 张伟刚 and 兰叶},
journal = {Institute of Process Engineering, CAS Institutional Repository},
year = {2015},
volume = {44},
number = {6},
pages = {27--31},
doi = {10.16490/j.cnki.issn.1001-3660.2015.06.006},
url = {https://doi.org/10.16490/j.cnki.issn.1001-3660.2015.06.006}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- plasma spraying
- hexagonal boron nitride
- solid lubricants
- friction and wear performance
- high-temperature wear
- wear mechanisms
- coating adhesion strength
- spray granulation
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
曹玉霞, 黄传兵, 杜令忠, 张伟刚, & 兰叶. (2015). 等离子喷涂NiCr/Cr3 C2-hBN复合涂层的制备及摩擦性能研究. Institute of Process Engineering, CAS Institutional Repository, 44(6), 27–31. https://doi.org/10.16490/j.cnki.issn.1001-3660.2015.06.006
How many times has this paper been cited?
1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
OpenAlex records no free legal copy. Check your library's access, the authors' pages or a repository, or ask the corresponding author for a copy.
Who wrote this paper?
曹玉霞, 黄传兵, 杜令忠, 张伟刚, 兰叶.
What is the DOI of this paper?
10.16490/j.cnki.issn.1001-3660.2015.06.006, permanently at https://doi.org/10.16490/j.cnki.issn.1001-3660.2015.06.006. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.