Journal article · 2022 · Open access
Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel
ACS Applied Nano Materials, 5(2), 2603–2615 · Published 1 February 2022 · DOI 10.1021/acsanm.1c04281
In brief
“Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel” is a 2022 journal article by Mayara Carla Uvida and 5 co-authors, published in ACS Applied Nano Materials. OpenAlex counts 24 citations as of 22 November 2026. It is open access: the full text is free to read at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas).
- Citations
- 24
- Most cited in
- 2024 (8)
- Field-weighted impact
- 1.66
- References
- 50
- Authors
- 6
Abstract
In the absence of preventive maintenance, corrosion of structural steel by the deterioration of the passive layer due to exposure to aggressive environments is the main failure factor of reinforced concrete. To overcome economic, safety, and environmental implications, present research efforts focus on eco-friendly organic–inorganic hybrid coatings to achieve effective protection of reinforcing steel. Nanostructured PMMA (poly(methyl methacrylate))–silica coatings developed by combining reactions of the polymerization of methyl methacrylate and 3-[(methacryloxy)propyl]trimethoxysilane with the sol–gel hydrolytic condensation of tetraethyl orthosilicate using isopropanol as a solvent represent a promising approach to accomplish this goal. The nanoscale dispersion of silica nodes covalently conjugated with PMMA chains led to transparent, homogeneous, and pore-free coatings deposited with a thickness of 15 μm on 2D and 3D reinforcing steel. Mechanical, thermal, and surface analyses showed a strong adhesion of the coating to the substrate surface (15.9 MPa), a thermal stability of up to 256 °C, and a contact angle of about 75°. Electrochemical assays in standard 3.5 wt % NaCl solution, simulated carbonated, and alkaline concrete pore solutions confirmed effective corrosion protection, with an impedance modulus of up to 100 GΩ cm 2 (at 4 mHz) and a lifetime of more than 670 days. Hence, PMMA–silica hybrid coatings are an eco-friendly and efficient alternative to protect reinforcing steel against corrosion, helping to prevent structural failures and fatal accidents.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Uvida, M. C., Trentin, A., Harb, S. V., Pulcinelli, S. H., Santilli, C. V., & Hammer, P. (2022). Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel. ACS Applied Nano Materials, 5(2), 2603–2615. https://doi.org/10.1021/acsanm.1c04281
MLA 9
Uvida, Mayara Carla, et al. “Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel.” ACS Applied Nano Materials, vol. 5, no. 2, 2022, pp. 2603–2615. https://doi.org/10.1021/acsanm.1c04281.
Chicago
Uvida, Mayara Carla, Andressa Trentin, Samarah Vargas Harb, Sandra H. Pulcinelli, Celso Valentim Santilli, and Peter Hammer. 2022. “Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel.” ACS Applied Nano Materials 5 (2): 2603–2615. https://doi.org/10.1021/acsanm.1c04281.
Harvard
Uvida, M. C. et al. (2022) ‘Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel’, ACS Applied Nano Materials, 5(2), pp. 2603–2615. doi:10.1021/acsanm.1c04281.
IEEE
M. C. Uvida, A. Trentin, S. V. Harb, S. H. Pulcinelli, C. V. Santilli, and P. Hammer, “Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel,” ACS Applied Nano Materials, vol. 5, no. 2, pp. 2603–2615, 2022, doi: 10.1021/acsanm.1c04281.
BibTeX
@article{uvida2022nanostructured,
title = {{Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel}},
author = {Uvida, Mayara Carla and Trentin, Andressa and Harb, Samarah Vargas and Pulcinelli, Sandra H. and Santilli, Celso Valentim and Hammer, Peter},
journal = {ACS Applied Nano Materials},
year = {2022},
volume = {5},
number = {2},
pages = {2603--2615},
doi = {10.1021/acsanm.1c04281},
url = {https://doi.org/10.1021/acsanm.1c04281}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2022 | 4 | |
| 2023 | 4 | |
| 2024 | 8 | |
| 2025 | 1 | |
| 2026 | 7 |
Its field-weighted citation impact is 1.66: it has been cited 1.66 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Civil and Structural Engineering › Concrete Corrosion and Durability
- poly(methyl methacrylate)
- silica coating
- reinforcement corrosion
- corrosion protection
- organic-inorganic hybrid coatings
- reinforced concrete durability
- coating adhesion
- thermal stability
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Uvida, M. C., Trentin, A., Harb, S. V., Pulcinelli, S. H., Santilli, C. V., & Hammer, P. (2022). Nanostructured Poly(methyl Methacrylate)–Silica Coatings for Corrosion Protection of Reinforcing Steel. ACS Applied Nano Materials, 5(2), 2603–2615. https://doi.org/10.1021/acsanm.1c04281
How many times has this paper been cited?
24 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas): sign in and open the full text from this page.
Who wrote this paper?
Mayara Carla Uvida, Andressa Trentin, Samarah Vargas Harb, Sandra H. Pulcinelli, Celso Valentim Santilli, Peter Hammer.
What is the DOI of this paper?
10.1021/acsanm.1c04281, permanently at https://doi.org/10.1021/acsanm.1c04281. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.