Journal article · 2026 · Open access
Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing
Bioinspiration & Biomimetics, 21(6), 066005 · Published 11 November 2026 · DOI 10.1088/1748-3190/aeb77c
In brief
“Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing” is a 2026 journal article by Moslem Mohammadi and 3 co-authors, published in Bioinspiration & Biomimetics. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Bioinspiration & Biomimetics.
- Citations
- 0
- References
- 29
- Authors
- 4
Abstract
Soft robotic grippers are well suited to handling delicate and irregular objects, yet many remain difficult to deploy in practice due to high hardware overhead (pumps, valves, motors) and continuous energy demand during grasping. This study presents a sustainable multi-stable soft gripper that decouples activation from holding and reduces manufacturing waste through mandrel-based, support-free multi-material fused filament fabrication. The gripper is a thin-walled cylindrical shell patterned with a circumferential auxetic kirigami lattice composed of bistable unit cells. Sequential snap-through transitions among the graded cell groups give rise to multistable behaviour at the gripper level, while the fully closed and fully deployed states serve as the functional grasping and object-acquisition states, respectively. A magnetically responsive distal tip, allows non-contact triggering to switch the structure into an expanded, truncated-cone open state for object acquisition, followed by snap-back to the closed state for passive grasping. Mechanical characterizations quantified activation and holding performance for two gripper sizes (36 mm and 58 mm initial diameters). The small gripper, with 25 g weight and up to 48 payload-to-weight ratios, reliably activated across pulling speeds from 10 to 1385 mm·min −1 , showing repeatable multi-peak snap-through behaviour and consistent activation displacement of ∼20 mm, with peak activation forces of approximately 10–12 N under six-magnet loading. Object pull-out tests demonstrated stable passive holding, with maximum pull-out forces ranging from ∼3–5 N for 40–48 mm circular objects (small gripper) and up to ∼17 N for non-circular objects (large gripper), with higher forces often arising from passive geometric interlocking. Finite element simulations using a Mooney–Rivlin hyperelastic thermoplastic elastomer model reproduced the snap-through sequence and instability locations, supporting interpretation of the activation mechanics. Robotic demonstrations on a 3-DoF arm further validated practical pick-and-place capability without onboard actuators or sensors for food industry and agricultural products.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Mohammadi, M., Kim, E. H., Park, K., & Zolfagharian, A. (2026). Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing. Bioinspiration & Biomimetics, 21(6), 066005. https://doi.org/10.1088/1748-3190/aeb77c
MLA 9
Mohammadi, Moslem, et al. “Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing.” Bioinspiration & Biomimetics, vol. 21, no. 6, 2026, p. 066005. https://doi.org/10.1088/1748-3190/aeb77c.
Chicago
Mohammadi, Moslem, Eui Hyun Kim, Keun Park, and Ali Zolfagharian. 2026. “Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing.” Bioinspiration & Biomimetics 21 (6): 066005. https://doi.org/10.1088/1748-3190/aeb77c.
Harvard
Mohammadi, M. et al. (2026) ‘Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing’, Bioinspiration & Biomimetics, 21(6), p. 066005. doi:10.1088/1748-3190/aeb77c.
IEEE
M. Mohammadi, E. H. Kim, K. Park, and A. Zolfagharian, “Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing,” Bioinspiration & Biomimetics, vol. 21, no. 6, p. 066005, 2026, doi: 10.1088/1748-3190/aeb77c.
BibTeX
@article{mohammadi2026multistable,
title = {{Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing}},
author = {Mohammadi, Moslem and Kim, Eui Hyun and Park, Keun and Zolfagharian, Ali},
journal = {Bioinspiration \& Biomimetics},
year = {2026},
volume = {21},
number = {6},
pages = {066005},
doi = {10.1088/1748-3190/aeb77c},
url = {https://doi.org/10.1088/1748-3190/aeb77c}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- soft gripper
- kirigami
- auxetic lattices
- snap-through
- multistability
- magnetic actuation
- fused deposition modeling
- pull-out force
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Mohammadi, M., Kim, E. H., Park, K., & Zolfagharian, A. (2026). Multistable kirigami soft grippers with sustainable magnetic actuation and conformal 3D/4D printing. Bioinspiration & Biomimetics, 21(6), 066005. https://doi.org/10.1088/1748-3190/aeb77c
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Bioinspiration & Biomimetics: sign in and open the PDF from this page.
Who wrote this paper?
Moslem Mohammadi, Eui Hyun Kim, Keun Park, Ali Zolfagharian.
What is the DOI of this paper?
10.1088/1748-3190/aeb77c, permanently at https://doi.org/10.1088/1748-3190/aeb77c. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.