Conference paper · 2013 · Open access

Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization

S Papp, András Kelemen, László Jakab-Farkas, Ioan Vida–Simiti, Dominic Biro

IOP Conference Series Materials Science and Engineering, 47, 012016 · Published 13 December 2013 · DOI 10.1088/1757-899x/47/1/012016

Open PDFView at the publisherCite this paper

In brief

“Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization” is a 2013 conference paper by S Papp and 4 co-authors, published in IOP Conference Series Materials Science and Engineering. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at IOP Conference Series Materials Science and Engineering.

Citations
3
Most cited in
2018 (2)
References
19
Authors
5

Abstract

Nanocrystalline multilayer thin film coatings, composed of nanometer-scale thick CrN, TiAlN and MoS 2 tri-layer systems, were prepared by reactive co-sputtering processes. The self-lubricated multilayer coating structures were deposited by one-fold oscillating movement of substrates in front of the sputter sources. Three independently operated direct current (dc) excited unbalanced magnetrons (UM) with rectangular cathodes of TiAl alloy (50/50%), pure chromium and MoS 2 were used as sputter sources. The reactive sputtering process was performed in a mixture of Ar-N 2 atmosphere. Hardened high-speed-steel (HSS) and thin oxide covered Si (100) wafers were used as substrates for tribological- and microstructure investigations, respectively. According to results of the chemical composition evaluated by Auger-electron spectroscopy (AES) and microstructure investigation by cross sectional transmission electron microscopy (XTEM), the CrN, TiAlN and the MoS 2 phases form practically continuous layers with large gradient transition of composition. The as-deposited CrN/ (Al,Ti)N/MoS 2 coatings have shown good friction behaviour, tested at room temperature in dry sliding condition with a ball-on-disk tribometer.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Papp, S., Kelemen, A., Jakab-Farkas, L., Vida–Simiti, I., & Biro, D. (2013). Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization. IOP Conference Series Materials Science and Engineering, 47, 012016. https://doi.org/10.1088/1757-899x/47/1/012016

MLA 9

Papp, S, et al. “Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization.” IOP Conference Series Materials Science and Engineering, vol. 47, 2013, p. 012016. https://doi.org/10.1088/1757-899x/47/1/012016.

Chicago

Papp, S, András Kelemen, László Jakab-Farkas, Ioan Vida–Simiti, and Dominic Biro. 2013. “Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization.” IOP Conference Series Materials Science and Engineering 47: 012016. https://doi.org/10.1088/1757-899x/47/1/012016.

Harvard

Papp, S. et al. (2013) ‘Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization’, IOP Conference Series Materials Science and Engineering, 47, p. 012016. doi:10.1088/1757-899x/47/1/012016.

IEEE

S. Papp, A. Kelemen, L. Jakab-Farkas, I. Vida–Simiti, and D. Biro, “Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization,” IOP Conference Series Materials Science and Engineering, vol. 47, p. 012016, 2013, doi: 10.1088/1757-899x/47/1/012016.

BibTeX

@inproceedings{papp2013multilayered,
  title     = {{Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization}},
  author    = {Papp, S and Kelemen, András and Jakab-Farkas, László and Vida–Simiti, Ioan and Biro, Dominic},
  booktitle = {IOP Conference Series Materials Science and Engineering},
  year      = {2013},
  volume    = {47},
  pages     = {012016},
  doi       = {10.1088/1757-899x/47/1/012016},
  url       = {https://doi.org/10.1088/1757-899x/47/1/012016}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • CrN
  • TiAlN
  • MoS2
  • nanocrystalline coatings
  • reactive co-sputtering
  • self-lubricating coatings
  • dry sliding friction
  • unbalanced magnetron sputtering

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Papp, S., Kelemen, A., Jakab-Farkas, L., Vida–Simiti, I., & Biro, D. (2013). Multilayered nanocrystalline CrN/TiAlN/MoS2 tribological thin film coatings: preparation and characterization. IOP Conference Series Materials Science and Engineering, 47, 012016. https://doi.org/10.1088/1757-899x/47/1/012016

How many times has this paper been cited?

3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at IOP Conference Series Materials Science and Engineering: sign in and open the PDF from this page.

Who wrote this paper?

S Papp, András Kelemen, László Jakab-Farkas, Ioan Vida–Simiti, Dominic Biro.

What is the DOI of this paper?

10.1088/1757-899x/47/1/012016, permanently at https://doi.org/10.1088/1757-899x/47/1/012016. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.