Journal article · 2025 · Open access

Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength

Nikša Čatipović, Ivan Peko, Jure Krolo, Jelena Čulić-Viskota, Andrej Razumić

Metalurgija, 65(2), 137–151 · Published 6 November 2025 · DOI 10.64486/m.65.2.4

Open PDFView at the publisherCite this paper

In brief

“Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength” is a 2025 journal article by Nikša Čatipović and 4 co-authors, published in Metalurgija. OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Metalurgija.

Citations
1
Most cited in
2026 (1)
Field-weighted impact
0.23
References
18
Authors
5

Abstract

In this work, the influence of austempering temperature and time on the microstructure, hardness and fatigue strength of austempered ductile iron (ADI) is investigated. The experimental part was carried out on a total of eleven samples, nine of which were subjected to heat treatment at three temperatures (250 °C, 350 °C and 450 °C) and three time intervals (30 min, 75 min and 120 min). The tests included measurements of the fatigue strength, Vickers hardness and a microstructural analysis. The aim was to determine the optimum austempering parameters to achieve an ausferritic microstructure and improved mechanical properties. The results showed that austempering temperature had a significant effect on the properties of the treated samples, while austempering time did not show consistent statistical significance, although some samples deviated positively from the statistical model. The best result was obtained with the sample austempered at 350 °C for 120 minutes. Metallographic analysis confirmed the presence of an ausferritic microstructure, which contributed to the improved mechanical properties. The research highlights the importance of properly selecting austempering parameters to achieve an optimal combination of hardness and fatigue strength. Measured values were used to develop mathematical models which can be applied to predict analysed properties of ADI depending on austempering parameters.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Čatipović, N., Peko, I., Krolo, J., Čulić-Viskota, J., & Razumić, A. (2025). Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength. Metalurgija, 65(2), 137–151. https://doi.org/10.64486/m.65.2.4

MLA 9

Čatipović, Nikša, et al. “Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength.” Metalurgija, vol. 65, no. 2, 2025, pp. 137–151. https://doi.org/10.64486/m.65.2.4.

Chicago

Čatipović, Nikša, Ivan Peko, Jure Krolo, Jelena Čulić-Viskota, and Andrej Razumić. 2025. “Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength.” Metalurgija 65 (2): 137–151. https://doi.org/10.64486/m.65.2.4.

Harvard

Čatipović, N. et al. (2025) ‘Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength’, Metalurgija, 65(2), pp. 137–151. doi:10.64486/m.65.2.4.

IEEE

N. Čatipović, I. Peko, J. Krolo, J. Čulić-Viskota, and A. Razumić, “Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength,” Metalurgija, vol. 65, no. 2, pp. 137–151, 2025, doi: 10.64486/m.65.2.4.

BibTeX

@article{catipovic2025multi,
  title     = {{Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength}},
  author    = {Čatipović, Nikša and Peko, Ivan and Krolo, Jure and Čulić-Viskota, Jelena and Razumić, Andrej},
  journal   = {Metalurgija},
  year      = {2025},
  volume    = {65},
  number    = {2},
  pages     = {137--151},
  doi       = {10.64486/m.65.2.4},
  url       = {https://doi.org/10.64486/m.65.2.4}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels

  • austempered ductile iron
  • austempering temperature
  • austempering time
  • Vickers hardness
  • fatigue strength
  • process optimization
  • property prediction models

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Čatipović, N., Peko, I., Krolo, J., Čulić-Viskota, J., & Razumić, A. (2025). Multi Response Modelling and Optimisation of Austempering Parameters on ADI Microstructure, Hardness and Fatigue Strength. Metalurgija, 65(2), 137–151. https://doi.org/10.64486/m.65.2.4

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Metalurgija: sign in and open the PDF from this page.

Who wrote this paper?

Nikša Čatipović, Ivan Peko, Jure Krolo, Jelena Čulić-Viskota, Andrej Razumić.

What is the DOI of this paper?

10.64486/m.65.2.4, permanently at https://doi.org/10.64486/m.65.2.4. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.