Journal article · 2015 · Open access
MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH
Jurnal MEKANIKAL, 38(2) · Published 1 January 2015
In brief
“MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH” is a 2015 journal article by P. Sreera P. Sreera, published in Jurnal MEKANIKAL. OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Jurnal MEKANIKAL.
- Citations
- 0
- Authors
- 1
Abstract
This paper presents the application of Taguchi method coupled with grey based GA approach for multiple output optimization of flux cored arc welding (FCAW) to obtain optimal weld bead geometry in mild steel plates IS 2062.This approach converts complex multiple objectives into a single grey reasoning grade which is the objective function for genetic algorithm (GA) approach. The welding parameters such as voltage, current, stick out and wire feed are optimized with multiple considerations such as bead width, penetration, reinforcement and dilution. Taguchi’s concepts of orthogonal array signal to noise (S/N) ratio has been used to optimize FCAW through a single comprehensive output measure (COM) which is the objective function. The significant contributions of parameters are estimated using analysis of variance (ANOVA) test. Confirmation test is conducted and reported. It is found that welding current is the most significant factor affecting bead geometry. Results indicate feasibility of grey based GA analysis in continuous improvement of welding industry.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Sreera, P. S. P. (2015). MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH. Jurnal MEKANIKAL, 38(2). https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/download/20/19
MLA 9
Sreera, P. Sreera P. “MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH.” Jurnal MEKANIKAL, vol. 38, no. 2, 2015. https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/download/20/19.
Chicago
Sreera, P. Sreera P. 2015. “MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH.” Jurnal MEKANIKAL 38 (2). https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/download/20/19.
Harvard
Sreera, P. S. P. (2015) ‘MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH’, Jurnal MEKANIKAL, 38(2). Available at: https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/download/20/19.
IEEE
P. S. P. Sreera, “MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH,” Jurnal MEKANIKAL, vol. 38, no. 2, 2015.
BibTeX
@article{sreera2015multi,
title = {{MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH}},
author = {Sreera, P. Sreera P.},
journal = {Jurnal MEKANIKAL},
year = {2015},
volume = {38},
number = {2},
url = {https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/download/20/19}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- flux-cored arc welding
- welding parameter optimization
- grey relational analysis
- genetic algorithm
- Taguchi method
- multi-objective optimization
- weld bead geometry
- weld penetration
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Sreera, P. S. P. (2015). MULTI CHARACTERISTIC OPTIMIZATION OF FLUX CORED ARC WELDING PROCESS PARAMETERS USING GREY BASED GAAPPROACH. Jurnal MEKANIKAL, 38(2). https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/download/20/19
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Jurnal MEKANIKAL: sign in and open the full text from this page.
Who wrote this paper?
P. Sreera P. Sreera.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.