Conference paper · 2010 · Open access

Modelling of a MEMS-based microgripper: application to dexterous micromanipulation

Mokrane Boudaoud, Yassine Haddab, Yann Le Gorrec

IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), sur CD ROM, 5634–5639 · Published 1 October 2010 · DOI 10.1109/iros.2010.5650553

Open full textView at the publisherCite this paper

In brief

“Modelling of a MEMS-based microgripper: application to dexterous micromanipulation” is a 2010 conference paper by Mokrane Boudaoud and 2 co-authors, published in IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). OpenAlex counts 28 citations as of 22 November 2026. It is open access: the full text is free to read at HAL.

Citations
28
Most cited in
2017 (5)
Field-weighted impact
3.07
References
14
Authors
3

Abstract

MEMS-based microgrippers with integrated force sensor have proved their efficiency to perform dexterous micromanipulation tasks through gripping forces sensing and control. For force control, knowledge based models are more relevant and gives better physical significance than the use of black box models. However this approach is often limited by many problems commonly encountered in the MEMS (micro electromechanical systems) structures such as: complex architectures, nonlinear behaviors and parameters uncertainties due to fabrication process at the micrometer scale. For these reasons theoretical approaches must be compared with experiments. This paper describes a modelling approach of a MEMS-based microgripper with integrated force sensor while handling micro-glass balls of 80μm diameter. Therefore, a state space representation is developed to couple both the dynamics of the actuation and sensing subsystems of the gripper through the stiffness of the manipulated object. A knowledge based model is obtained for small displacements at the tip of the gripper arms (small gripping forces) and is compared with experimental approaches. Good agreements are observed allowing interesting perspectives for the control.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Boudaoud, M., Haddab, Y., & Le Gorrec, Y. (2010). Modelling of a MEMS-based microgripper: application to dexterous micromanipulation. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), sur CD ROM, 5634–5639. https://doi.org/10.1109/iros.2010.5650553

MLA 9

Boudaoud, Mokrane, et al. “Modelling of a MEMS-based microgripper: application to dexterous micromanipulation.” IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), vol. sur CD ROM, 2010, pp. 5634–5639. https://doi.org/10.1109/iros.2010.5650553.

Chicago

Boudaoud, Mokrane, Yassine Haddab, and Yann Le Gorrec. 2010. “Modelling of a MEMS-based microgripper: application to dexterous micromanipulation.” IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) sur CD ROM: 5634–5639. https://doi.org/10.1109/iros.2010.5650553.

Harvard

Boudaoud, M., Haddab, Y. and Le Gorrec, Y. (2010) ‘Modelling of a MEMS-based microgripper: application to dexterous micromanipulation’, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), sur CD ROM, pp. 5634–5639. doi:10.1109/iros.2010.5650553.

IEEE

M. Boudaoud, Y. Haddab, and Y. Le Gorrec, “Modelling of a MEMS-based microgripper: application to dexterous micromanipulation,” IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), vol. sur CD ROM, pp. 5634–5639, 2010, doi: 10.1109/iros.2010.5650553.

BibTeX

@inproceedings{boudaoud2010modelling,
  title     = {{Modelling of a MEMS-based microgripper: application to dexterous micromanipulation}},
  author    = {Boudaoud, Mokrane and Haddab, Yassine and Le Gorrec, Yann},
  booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)},
  year      = {2010},
  volume    = {sur CD ROM},
  pages     = {5634--5639},
  doi       = {10.1109/iros.2010.5650553},
  url       = {https://doi.org/10.1109/iros.2010.5650553}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201444
201511
201622
201755
201922
202122
202211
202311
202411
202511

Its field-weighted citation impact is 3.07: it has been cited 3.07 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies

  • MEMS microgripper
  • knowledge-based modeling
  • state-space model
  • object stiffness
  • gripping force control
  • parameter uncertainty

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Boudaoud, M., Haddab, Y., & Le Gorrec, Y. (2010). Modelling of a MEMS-based microgripper: application to dexterous micromanipulation. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), sur CD ROM, 5634–5639. https://doi.org/10.1109/iros.2010.5650553

How many times has this paper been cited?

28 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at HAL: sign in and open the full text from this page.

Who wrote this paper?

Mokrane Boudaoud, Yassine Haddab, Yann Le Gorrec.

What is the DOI of this paper?

10.1109/iros.2010.5650553, permanently at https://doi.org/10.1109/iros.2010.5650553. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.