Journal article · 2021 · Open access

Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects

Long Kang, Sang-Hwa Kim, Byung-Ju Yi

Machines, 9(12), 347 · Published 9 December 2021 · DOI 10.3390/machines9120347

Open PDFView at the publisherCite this paper

In brief

“Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects” is a 2021 journal article by Long Kang and 2 co-authors, published in Machines. OpenAlex counts 15 citations as of 22 November 2026, which puts it in the top 8% of works published in 2021 by citations. It is open access under a CC BY licence: the full text is free to read at Machines.

Citations
15
Most cited in
2026 (5)
Field-weighted impact
0.62
References
42
Authors
3

Abstract

Underactuated robotic grippers have the advantage of lower cost, simpler control, and higher safety over the fully actuated grippers. In this study, an underactuated robotic finger is presented. The design issues that should be considered for stable grasping are discussed in detail. This robotic finger is applied to design a two-fingered underactuated gripper. Firstly, a new three-DOF linkage-driven robotic finger that combines a five-bar mechanism and a double parallelogram is presented. This special architecture allows us to put all of the required actuators into the palm. By adding a torsion spring and a mechanical stopper at a passive joint, this underactuated finger mechanism can be used to perform parallel grasping, shape-adaptive grasping, and environmental contact-based grasp. Secondly, the dynamic model of this robotic finger is developed to investigate how to select an appropriate torsion spring. The dynamic simulation is performed with a multi-body dynamic simulator to verify our proposed approach. Moreover, static grasp models of both two-point and three-point contact grasps are investigated. Finally, different types of grasping modes are verified experimentally with a two-fingered underactuated robotic gripper.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kang, L., Kim, S.-H., & Yi, B.-J. (2021). Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects. Machines, 9(12), 347. https://doi.org/10.3390/machines9120347

MLA 9

Kang, Long, et al. “Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects.” Machines, vol. 9, no. 12, 2021, p. 347. https://doi.org/10.3390/machines9120347.

Chicago

Kang, Long, Sang-Hwa Kim, and Byung-Ju Yi. 2021. “Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects.” Machines 9 (12): 347. https://doi.org/10.3390/machines9120347.

Harvard

Kang, L., Kim, S.-H. and Yi, B.-J. (2021) ‘Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects’, Machines, 9(12), p. 347. doi:10.3390/machines9120347.

IEEE

L. Kang, S.-H. Kim, and B.-J. Yi, “Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects,” Machines, vol. 9, no. 12, p. 347, 2021, doi: 10.3390/machines9120347.

BibTeX

@article{kang2021modeling,
  title     = {{Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects}},
  author    = {Kang, Long and Kim, Sang-Hwa and Yi, Byung-Ju},
  journal   = {Machines},
  year      = {2021},
  volume    = {9},
  number    = {12},
  pages     = {347},
  doi       = {10.3390/machines9120347},
  url       = {https://doi.org/10.3390/machines9120347}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202222
202333
202422
202533
202655

Its field-weighted citation impact is 0.62: it has been cited 0.62 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Control and Systems Engineering › Robotic Mechanisms and Dynamics

  • robotic fingers
  • five-bar mechanism
  • torsion springs
  • passive joints
  • dynamic modeling
  • two-fingered gripper
  • multibody dynamics

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Kang, L., Kim, S.-H., & Yi, B.-J. (2021). Modeling, Design, and Implementation of an Underactuated Gripper with Capability of Grasping Thin Objects. Machines, 9(12), 347. https://doi.org/10.3390/machines9120347

How many times has this paper been cited?

15 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Machines: sign in and open the PDF from this page.

Who wrote this paper?

Long Kang, Sang-Hwa Kim, Byung-Ju Yi.

What is the DOI of this paper?

10.3390/machines9120347, permanently at https://doi.org/10.3390/machines9120347. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.