Paper · 2017 · Open access

Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings

Ping Ren, Mao Wen, Su Xuan Du, Qingnan Meng, Kan Zhang, Weitao Zheng

Materials science forum, 898, 1424–1430 · Published 19 June 2017 · DOI 10.4028/www.scientific.net/msf.898.1424

Open full textCite this paper

In brief

“Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings” is a 2017 paper by Ping Ren and 5 co-authors, published in Materials science forum. OpenAlex counts 4 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials science forum.

Citations
4
Most cited in
2020 (1)
Field-weighted impact
0.17
References
17
Authors
6

Abstract

The NbN/Ni coatings were deposited by co-sputtering on Si (100) substrates. The structure, hardness and tribological properties were characterized by X-ray diffraction (XRD), atomic force microscope (AFM), scanning electron microscopy (SEM), nanoindentation test and ball-on-disc tribometer. XRD revealed that the NbN/Ni coatings exhibited a NaCl-type NbN structure but no sign of any nickel phase. For the coatings with various nickel powers ranged from 20 W to 40 W, the shrinkage of the lattice parameter of NbN indicated that Ni atoms might be incorporated into the NbN lattice with a substitution of Nb atoms by the smaller Ni atoms. Further increasing of Ni powers, the degree of crystallinity of the coatings became worse. The NbN coating doped with a certan power of Ni (40 W) exhibited the best degree of crystallinity among all samples. It also displayed a maximum microhardness of 25 GPa combined with a better resistance to plastic deformation, which could attribute to the grain refinement and the solid solution strengthening. Tribilogical properties of NbN/Ni coatings were also found to be depentent on nickel powers significantly. For the pure NbN coating, the coefficient of friction (CoF) was 0.7 approximately, while it decreased to 0.54 when the power of Ni increased to 40 W. Simultaneously, the wear resistance of the NbN/Ni coatings was improved due to the spontaneous oxidation of the wear track surfaces caused by the addition of a certain amount of nickel to the niobium nitride coatings.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Ren, P., Wen, M., Du, S. X., Meng, Q., Zhang, K., & Zheng, W. (2017). Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings. Materials science forum, 898, 1424–1430. https://doi.org/10.4028/www.scientific.net/msf.898.1424

MLA 9

Ren, Ping, et al. “Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings.” Materials science forum, vol. 898, 2017, pp. 1424–1430. https://doi.org/10.4028/www.scientific.net/msf.898.1424.

Chicago

Ren, Ping, Mao Wen, Su Xuan Du, Qingnan Meng, Kan Zhang, and Weitao Zheng. 2017. “Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings.” Materials science forum 898: 1424–1430. https://doi.org/10.4028/www.scientific.net/msf.898.1424.

Harvard

Ren, P. et al. (2017) ‘Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings’, Materials science forum, 898, pp. 1424–1430. doi:10.4028/www.scientific.net/msf.898.1424.

IEEE

P. Ren, M. Wen, S. X. Du, Q. Meng, K. Zhang, and W. Zheng, “Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings,” Materials science forum, vol. 898, pp. 1424–1430, 2017, doi: 10.4028/www.scientific.net/msf.898.1424.

BibTeX

@article{ren2017microstructure,
  title     = {{Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings}},
  author    = {Ren, Ping and Wen, Mao and Du, Su Xuan and Meng, Qingnan and Zhang, Kan and Zheng, Weitao},
  journal   = {Materials science forum},
  year      = {2017},
  volume    = {898},
  pages     = {1424--1430},
  doi       = {10.4028/www.scientific.net/msf.898.1424},
  url       = {https://doi.org/10.4028/www.scientific.net/msf.898.1424}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202011
202211
202311
202611

Its field-weighted citation impact is 0.17: it has been cited 0.17 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • niobium nitride
  • nickel doping
  • co-sputtering
  • microstructure
  • microhardness
  • tribological properties
  • friction coefficient
  • wear resistance

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Ren, P., Wen, M., Du, S. X., Meng, Q., Zhang, K., & Zheng, W. (2017). Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings. Materials science forum, 898, 1424–1430. https://doi.org/10.4028/www.scientific.net/msf.898.1424

How many times has this paper been cited?

4 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials science forum: sign in and open the full text from this page.

Who wrote this paper?

Ping Ren, Mao Wen, Su Xuan Du, Qingnan Meng, Kan Zhang, Weitao Zheng.

What is the DOI of this paper?

10.4028/www.scientific.net/msf.898.1424, permanently at https://doi.org/10.4028/www.scientific.net/msf.898.1424. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.