Paper · 2025 · Open access

Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings

YOU Shilong, GUAN Mengxue, FAN Qixiang, CAO Fengting, LIU Yanmei, WANG Tiegang

DOAJ (DOAJ: Directory of Open Access Journals) · Published 1 November 2025 · DOI 10.16577/j.issn.1001-1560.2025.0184

Open full textView at the publisherCite this paper

In brief

“Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings” is a 2025 paper by YOU Shilong, GUAN Mengxue, FAN Qixiang, CAO Fengting, LIU Yanmei, WANG Tiegang, published in DOAJ (DOAJ: Directory of Open Access Journals). OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at DOAJ (DOAJ: Directory of Open Access Journals).

Citations
0
Authors
1

Abstract

To investigate the effect of modulation period on the properties of AlCrSiN/AlTiN nanomultilayer coatings, AlTiN and AlCrSiN monolayer coatings, along with two types of AlCrSiN/AlTiN nanomultilayer coatings with different modulation periods, were fabricated using arc ion plating, direct current magnetron sputtering, and a hybrid deposition technique combining both methods.Subsequently, the phase structure,microstructure, mechanical characteristics and tribological performance of the coatings were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), nanoindenter and other complementary techniques.Results revealed that in contrast to AlTiN and AlCrSiN monolayer coatings exhibiting a (111) preferred orientation, the AlCrSiN/AlTiN nanomultilayer coatings developed a face-centered cubic(fcc)-(Al,Cr,Ti)N solid solution with a (200) preferred orientation.The surface roughness of the two multilayer coatings was lower compared to the monolayer coatings, and with an increase in the modulation period, the surface quality of the coatings exhibited a gradual improvement,accompanied by a smoother and more distinct interlayer interface.Mechanical property assessments indicated that the AlCrSiN coating fabricated via magnetron sputtering exhibited the lowest hardness,which measured 16.57 GPa,whereas the multilayer coating with Λ=106 nm demonstrated the highest hardness, which reached 36.63 GPa, suggesting that the multilayer architecture can enhance the hardness of the coating.Despite possessing fewer interfaces compared to the coating with Λ=91 nm, the coating with Λ =106 nm exhibited a higher hardness, which might be attributed to its smoother interface morphology and lower surface roughness.Furthermore, the multilayer coating with Λ =106 nm exhibited the highest resistance to plastic deformation (H3/E*2 value,0.147 GPa), the greatest adhesion strength (58.29 N), and the lowest wear rate [5.3×10-6 mm3/(N·m)], suggesting its superior mechanical properties of a multilayer architecture.This study revealed that adopting a multilayer structure design and appropriately adjusting the modulation period could significantly enhance the mechanical properties and anti-friction-wear performance of coatings.The findings of this research offer valuable guidance for the performance enhancement and engineering application of AlCrSiN/AlTiN multilayer coatings.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Tiegang, Y. S. G. M. F. Q. C. F. L. Y. W. (2025). Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings. DOAJ (DOAJ: Directory of Open Access Journals). https://doi.org/10.16577/j.issn.1001-1560.2025.0184

MLA 9

Tiegang, YOU Shilong, GUAN Mengxue, FAN Qixiang, CAO Fengting, LIU Yanmei, WANG. “Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings.” DOAJ (DOAJ: Directory of Open Access Journals), 2025. https://doi.org/10.16577/j.issn.1001-1560.2025.0184.

Chicago

Tiegang, YOU Shilong, GUAN Mengxue, FAN Qixiang, CAO Fengting, LIU Yanmei, WANG. 2025. “Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings.” DOAJ (DOAJ: Directory of Open Access Journals). https://doi.org/10.16577/j.issn.1001-1560.2025.0184.

Harvard

Tiegang, Y. S. G. M. F. Q. C. F. L. Y. W. (2025) ‘Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings’, DOAJ (DOAJ: Directory of Open Access Journals). doi:10.16577/j.issn.1001-1560.2025.0184.

IEEE

Y. S. G. M. F. Q. C. F. L. Y. W. Tiegang, “Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings,” DOAJ (DOAJ: Directory of Open Access Journals), 2025, doi: 10.16577/j.issn.1001-1560.2025.0184.

BibTeX

@article{tiegang2025microstructure,
  title     = {{Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings}},
  author    = {Tiegang, YOU Shilong, GUAN Mengxue, FAN Qixiang, CAO Fengting, LIU Yanmei, WANG},
  journal   = {DOAJ (DOAJ: Directory of Open Access Journals)},
  year      = {2025},
  doi       = {10.16577/j.issn.1001-1560.2025.0184},
  url       = {https://doi.org/10.16577/j.issn.1001-1560.2025.0184}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • modulation period
  • arc ion plating
  • magnetron sputtering
  • hybrid deposition
  • crystallographic texture
  • surface roughness
  • coating hardness
  • adhesion strength

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Tiegang, Y. S. G. M. F. Q. C. F. L. Y. W. (2025). Microstructure, Mechanical and Tribological Properties of AlCrSiN/AlTiN Nanomultilayer Coatings. DOAJ (DOAJ: Directory of Open Access Journals). https://doi.org/10.16577/j.issn.1001-1560.2025.0184

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at DOAJ (DOAJ: Directory of Open Access Journals): sign in and open the full text from this page.

Who wrote this paper?

YOU Shilong, GUAN Mengxue, FAN Qixiang, CAO Fengting, LIU Yanmei, WANG Tiegang.

What is the DOI of this paper?

10.16577/j.issn.1001-1560.2025.0184, permanently at https://doi.org/10.16577/j.issn.1001-1560.2025.0184. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.