Journal article · 2025 · Open access

Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties

Valeria Miranda-López, Manuel Alejandro Beltrán Zúñiga, Víctor Manuel López-Hirata, Hector Javier Dorantes-Rosales, Maribel L. Saucedo‐Muñoz

Metals, 15(10), 1096 · Published 1 October 2025 · DOI 10.3390/met15101096

Open PDFView at the publisherCite this paper

In brief

“Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties” is a 2025 journal article by Valeria Miranda-López and 4 co-authors, published in Metals. OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Metals.

Citations
1
Most cited in
2026 (1)
Field-weighted impact
0.23
References
33
Authors
5

Abstract

This work studied microstructure evolution during the intercritical treatment of Fe–1.4Si–2.6Mn–0.17C TRIP steel. Steel specimens were heated in the intercritical region, α ferrite and γ austenite phases, at 750 °C for 30 min, water-quenched, air-cooled, and austempered at 350 °C for 30 min. Microstructural analysis was performed by optical microscopy, scanning electron microscopy, and X-ray diffraction. All heat-treated specimens were mechanically characterized by uniaxial tension and Vickers hardness tests. Thermo-Calc software 2024b was used to analyze the microstructure and phases of heat-treated steel. The microstructural characterization results revealed that the phases and microconstituents were ferrite, austenite, cementite, pearlite, and retained austenite. Thermo-Calc results were consistent with the phases and microconstituents identified for each heat-treatment condition. On the other hand, the tension test results showed that the yield strength and ultimate tensile strength ranged between 690 and 820 MPa and 1190–1255 MPa, respectively, for these heat-treated steels. Likewise, Thermo-Calc proved to be a powerful tool for designing intercritical heat treatments for TRIP steels.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Miranda-López, V., Zúñiga, M. A. B., López-Hirata, V. M., Dorantes-Rosales, H. J., & Saucedo‐Muñoz, M. L. (2025). Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties. Metals, 15(10), 1096. https://doi.org/10.3390/met15101096

MLA 9

Miranda-López, Valeria, et al. “Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties.” Metals, vol. 15, no. 10, 2025, p. 1096. https://doi.org/10.3390/met15101096.

Chicago

Miranda-López, Valeria, Manuel Alejandro Beltrán Zúñiga, Víctor Manuel López-Hirata, Hector Javier Dorantes-Rosales, and Maribel L. Saucedo‐Muñoz. 2025. “Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties.” Metals 15 (10): 1096. https://doi.org/10.3390/met15101096.

Harvard

Miranda-López, V. et al. (2025) ‘Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties’, Metals, 15(10), p. 1096. doi:10.3390/met15101096.

IEEE

V. Miranda-López, M. A. B. Zúñiga, V. M. López-Hirata, H. J. Dorantes-Rosales, and M. L. Saucedo‐Muñoz, “Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties,” Metals, vol. 15, no. 10, p. 1096, 2025, doi: 10.3390/met15101096.

BibTeX

@article{mirandalopez2025microstructure,
  title     = {{Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties}},
  author    = {Miranda-López, Valeria and Zúñiga, Manuel Alejandro Beltrán and López-Hirata, Víctor Manuel and Dorantes-Rosales, Hector Javier and Saucedo‐Muñoz, Maribel L.},
  journal   = {Metals},
  year      = {2025},
  volume    = {15},
  number    = {10},
  pages     = {1096},
  doi       = {10.3390/met15101096},
  url       = {https://doi.org/10.3390/met15101096}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels

  • TRIP steel
  • intercritical annealing
  • microstructure evolution
  • austempering
  • retained austenite
  • ferrite
  • austenite
  • cementite

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Miranda-López, V., Zúñiga, M. A. B., López-Hirata, V. M., Dorantes-Rosales, H. J., & Saucedo‐Muñoz, M. L. (2025). Microstructure Evolution of a TRIP Fe–1.4Si–2.6Mn–0.17C Steel After Intercritical Treating and Its Effect on Mechanical Properties. Metals, 15(10), 1096. https://doi.org/10.3390/met15101096

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Metals: sign in and open the PDF from this page.

Who wrote this paper?

Valeria Miranda-López, Manuel Alejandro Beltrán Zúñiga, Víctor Manuel López-Hirata, Hector Javier Dorantes-Rosales, Maribel L. Saucedo‐Muñoz.

What is the DOI of this paper?

10.3390/met15101096, permanently at https://doi.org/10.3390/met15101096. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.