Journal article · 2020 · Open access
Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel
Journal of Materials Research and Technology, 9(5), 11545–11562 · Published 26 August 2020 · DOI 10.1016/j.jmrt.2020.08.048
In brief
“Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel” is a 2020 journal article by Souad Ayadi and 3 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 36 citations as of 22 November 2026, which puts it in the top 6% of works published in 2020 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Journal of Materials Research and Technology.
- Citations
- 36
- Most cited in
- 2024 (12)
- Field-weighted impact
- 1.48
- References
- 31
- Authors
- 4
Abstract
In this study, microstructure and wear behavior of chromium, molybdenum and niobium alloyed manganese steel were examined and compared to manganese steel containing a low chromium content. Two heat treatments were applied one at 1050 °C and the other at 1100 °C followed by water quenching. The microstructures were characterized by optical microscopy and scanning electron microscopy (SEM) equipped with an energy dispersive spectrometer (EDS). Rockwell C hardness (HRC) and Vickers microhardness were also measured. Wear behavior in dry conditions was investigated under a load of 300 N using pin-on-disc method. Tribological behavior in boundary lubricated conditions under a load of 60 N at high temperature (100 °C) was studied using a custom-made reciprocating tribometer by measuring the mass loss and the friction coefficient. 5W-40 engine oil was used as lubricant. AFM analysis and roughness 2D and 3D of the tested samples were measured. The results show that the as-cast microstructure of the studied manganese steels consists of an austenitic matrix and secondary carbides. Heat treatments at high temperatures change the microstructure and favors the formation of martensite and retained austenite. The increase of heat treatment temperature and addition of Cr, Mo and Nb increase the rate of the formed martensite, which improves the hardness, the wear resistance and the tribological behavior. 5W-40 engine oil favors the formation of tribofilm under the mechanical action during the test, which decreases the friction coefficient of heat treated chromium, molybdenum and niobium alloyed manganese steel. In addition, this oil promotes a polishing wear of the same steel heat treated at 1100 °C and colored martensite in blue.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Ayadi, S., Hadji, A., Kaleli, H., & Demirtaş, S. (2020). Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel. Journal of Materials Research and Technology, 9(5), 11545–11562. https://doi.org/10.1016/j.jmrt.2020.08.048
MLA 9
Ayadi, Souad, et al. “Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel.” Journal of Materials Research and Technology, vol. 9, no. 5, 2020, pp. 11545–11562. https://doi.org/10.1016/j.jmrt.2020.08.048.
Chicago
Ayadi, Souad, Ali Hadji, Hakan Kaleli, and Selman Demirtaş. 2020. “Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel.” Journal of Materials Research and Technology 9 (5): 11545–11562. https://doi.org/10.1016/j.jmrt.2020.08.048.
Harvard
Ayadi, S. et al. (2020) ‘Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel’, Journal of Materials Research and Technology, 9(5), pp. 11545–11562. doi:10.1016/j.jmrt.2020.08.048.
IEEE
S. Ayadi, A. Hadji, H. Kaleli, and S. Demirtaş, “Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel,” Journal of Materials Research and Technology, vol. 9, no. 5, pp. 11545–11562, 2020, doi: 10.1016/j.jmrt.2020.08.048.
BibTeX
@article{ayadi2020microstructure,
title = {{Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel}},
author = {Ayadi, Souad and Hadji, Ali and Kaleli, Hakan and Demirtaş, Selman},
journal = {Journal of Materials Research and Technology},
year = {2020},
volume = {9},
number = {5},
pages = {11545--11562},
doi = {10.1016/j.jmrt.2020.08.048},
url = {https://doi.org/10.1016/j.jmrt.2020.08.048}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2021 | 3 | |
| 2022 | 3 | |
| 2023 | 7 | |
| 2024 | 12 | |
| 2025 | 5 | |
| 2026 | 6 |
Its field-weighted citation impact is 1.48: it has been cited 1.48 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Metal Alloys Wear and Properties
- high-manganese steel
- chromium alloying
- molybdenum alloying
- niobium alloying
- wear resistance
- microstructure
- heat treatment
- martensite
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Ayadi, S., Hadji, A., Kaleli, H., & Demirtaş, S. (2020). Microstructure and wear behavior of a Cr-Mo-Nb alloyed manganese steel. Journal of Materials Research and Technology, 9(5), 11545–11562. https://doi.org/10.1016/j.jmrt.2020.08.048
How many times has this paper been cited?
36 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of Materials Research and Technology: sign in and open the full text from this page.
Who wrote this paper?
Souad Ayadi, Ali Hadji, Hakan Kaleli, Selman Demirtaş.
What is the DOI of this paper?
10.1016/j.jmrt.2020.08.048, permanently at https://doi.org/10.1016/j.jmrt.2020.08.048. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.