Journal article · 2023 · Open access

Microstructure and tribological study of TiAlCN and TiTaCN coatings

Nauryzbek Bakhytuly, Aidar Karaulovich Kenzhegulov, М. Nurtanto, A. Aliev, E. Kuldeev

Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 327(4), 99–110 · Published 30 April 2023 · DOI 10.31643/2023/6445.45

Open PDFView at the publisherCite this paper

In brief

“Microstructure and tribological study of TiAlCN and TiTaCN coatings” is a 2023 journal article by Nauryzbek Bakhytuly and 4 co-authors, published in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources. OpenAlex counts 15 citations as of 19 November 2026. It is open access: the full text is free to read at Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources.

Citations
15
Most cited in
2025 (6)
Field-weighted impact
1.40
References
37
Authors
5

Abstract

The low coefficients of friction and wear rates of transition metal carbonitride make them excellent candidates for friction and wear applications. Coatings based on titanium carbonitride alloyed with Ta and Al were deposited using reactive magnetron sputtering on the surface of titanium VT1-0 and steel AISI 304. The effect of alloying titanium carbonitrides with Ta and Al and acetylene flow during deposition on the structure, composition, and tribological properties of the coating was studied. TiAlCN and TiTаCN coatings were deposited in various acetylene flows along with stable argon and nitrogen flows. Scanning electron microscopy, optical microscopy, X-ray phase analysis, and sliding wear test (ball-on-disk method) in two media were used to study the resulting coatings. The average coefficient of friction of the coating under friction without lubrication varied in the range of 0.13-0.85 and under friction with lubrication in the range of 0.0015-0.081. From the point of view of wear rate, it is shown that the most wear-resistant coating under friction conditions with and without lubrication is TiAlCN-2. The resulting coatings can be useful as protection for machine parts or tools that are subject to friction and wear.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Bakhytuly, N., Kenzhegulov, A. K., Nurtanto, М., Aliev, A., & Kuldeev, E. (2023). Microstructure and tribological study of TiAlCN and TiTaCN coatings. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 327(4), 99–110. https://doi.org/10.31643/2023/6445.45

MLA 9

Bakhytuly, Nauryzbek, et al. “Microstructure and tribological study of TiAlCN and TiTaCN coatings.” Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, vol. 327, no. 4, 2023, pp. 99–110. https://doi.org/10.31643/2023/6445.45.

Chicago

Bakhytuly, Nauryzbek, Aidar Karaulovich Kenzhegulov, М. Nurtanto, A. Aliev, and E. Kuldeev. 2023. “Microstructure and tribological study of TiAlCN and TiTaCN coatings.” Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources 327 (4): 99–110. https://doi.org/10.31643/2023/6445.45.

Harvard

Bakhytuly, N. et al. (2023) ‘Microstructure and tribological study of TiAlCN and TiTaCN coatings’, Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 327(4), pp. 99–110. doi:10.31643/2023/6445.45.

IEEE

N. Bakhytuly, A. K. Kenzhegulov, М. Nurtanto, A. Aliev, and E. Kuldeev, “Microstructure and tribological study of TiAlCN and TiTaCN coatings,” Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, vol. 327, no. 4, pp. 99–110, 2023, doi: 10.31643/2023/6445.45.

BibTeX

@article{bakhytuly2023microstructure,
  title     = {{Microstructure and tribological study of TiAlCN and TiTaCN coatings}},
  author    = {Bakhytuly, Nauryzbek and Kenzhegulov, Aidar Karaulovich and Nurtanto, М. and Aliev, A. and Kuldeev, E.},
  journal   = {Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources},
  year      = {2023},
  volume    = {327},
  number    = {4},
  pages     = {99--110},
  doi       = {10.31643/2023/6445.45},
  url       = {https://doi.org/10.31643/2023/6445.45}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202311
202433
202566
202655

Its field-weighted citation impact is 1.40: it has been cited 1.40 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • titanium carbonitride
  • reactive magnetron sputtering
  • friction coefficient
  • wear rate
  • sliding wear
  • lubricated friction
  • titanium VT1-0
  • coating microstructure

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Bakhytuly, N., Kenzhegulov, A. K., Nurtanto, М., Aliev, A., & Kuldeev, E. (2023). Microstructure and tribological study of TiAlCN and TiTaCN coatings. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 327(4), 99–110. https://doi.org/10.31643/2023/6445.45

How many times has this paper been cited?

15 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources: sign in and open the PDF from this page.

Who wrote this paper?

Nauryzbek Bakhytuly, Aidar Karaulovich Kenzhegulov, М. Nurtanto, A. Aliev, E. Kuldeev.

What is the DOI of this paper?

10.31643/2023/6445.45, permanently at https://doi.org/10.31643/2023/6445.45. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.