Journal article · 2014 · Open access

Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP

D. M. Marulanda, J. Cuellar, Claudia Lorena García Rojas, L. M. Acosta

Universitas Scientiarum, 19(2), 139–146 · Published 20 March 2014 · DOI 10.11144/javeriana.sc19-2.mpma

Open PDFView at the publisherCite this paper

In brief

“Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP” is a 2014 journal article by D. M. Marulanda and 3 co-authors, published in Universitas Scientiarum. OpenAlex counts 4 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Universitas Scientiarum.

Citations
4
Most cited in
2019 (1)
References
27
Authors
4

Abstract

Low carbon cold drawn steel was deformed using equal channel angular pressing to evaluate its mechanical properties and microstructure, while assessing the possibility of improving properties beyond the cold drawn process. We used low carbon cold drawn steel with a composition of 0.16% C, 0.8% Mn, 0.2% Si, 0.02% P, 0.012% S and Fe balance. The process was carried out at room temperature and four passes at route Bc with a deformation of ~0.6 in each pass. Using scanning electron microscopy and x-ray diffraction, we evaluated the evolution of the structure before and after deformation as well as the mechanical properties of microhardness and tensile strength. A slight increase in the mechanical properties occurred when the number of passes was increased. There were changes in the original ferritic-pearlitic structure with the refinement of ferrite grains and pearlite deformation.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Marulanda, D. M., Cuellar, J., Rojas, C. L. G., & Acosta, L. M. (2014). Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP. Universitas Scientiarum, 19(2), 139–146. https://doi.org/10.11144/javeriana.sc19-2.mpma

MLA 9

Marulanda, D. M., et al. “Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP.” Universitas Scientiarum, vol. 19, no. 2, 2014, pp. 139–146. https://doi.org/10.11144/javeriana.sc19-2.mpma.

Chicago

Marulanda, D. M., J. Cuellar, Claudia Lorena García Rojas, and L. M. Acosta. 2014. “Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP.” Universitas Scientiarum 19 (2): 139–146. https://doi.org/10.11144/javeriana.sc19-2.mpma.

Harvard

Marulanda, D. M. et al. (2014) ‘Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP’, Universitas Scientiarum, 19(2), pp. 139–146. doi:10.11144/javeriana.sc19-2.mpma.

IEEE

D. M. Marulanda, J. Cuellar, C. L. G. Rojas, and L. M. Acosta, “Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP,” Universitas Scientiarum, vol. 19, no. 2, pp. 139–146, 2014, doi: 10.11144/javeriana.sc19-2.mpma.

BibTeX

@article{marulanda2014microstructure,
  title     = {{Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP}},
  author    = {Marulanda, D. M. and Cuellar, J. and Rojas, Claudia Lorena García and Acosta, L. M.},
  journal   = {Universitas Scientiarum},
  year      = {2014},
  volume    = {19},
  number    = {2},
  pages     = {139--146},
  doi       = {10.11144/javeriana.sc19-2.mpma},
  url       = {https://doi.org/10.11144/javeriana.sc19-2.mpma}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202011
202111
202611

Topic and keywords

Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties

  • equal channel angular pressing
  • severe plastic deformation
  • grain refinement
  • ferrite-pearlite microstructure
  • microhardness
  • tensile strength
  • microstructure evolution

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Marulanda, D. M., Cuellar, J., Rojas, C. L. G., & Acosta, L. M. (2014). Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP. Universitas Scientiarum, 19(2), 139–146. https://doi.org/10.11144/javeriana.sc19-2.mpma

How many times has this paper been cited?

4 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Universitas Scientiarum: sign in and open the PDF from this page.

Who wrote this paper?

D. M. Marulanda, J. Cuellar, Claudia Lorena García Rojas, L. M. Acosta.

What is the DOI of this paper?

10.11144/javeriana.sc19-2.mpma, permanently at https://doi.org/10.11144/javeriana.sc19-2.mpma. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.