Journal article · 2019 · Open access

Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C

Gongjun Cui, Yanping Liu, Guijun Gao, Huiqiang Liu, Ziming Kou

Materials, 13(1), 51 · Published 20 December 2019 · DOI 10.3390/ma13010051

Open PDFView at the publisherCite this paper

In brief

“Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C” is a 2019 journal article by Gongjun Cui and 4 co-authors, published in Materials. OpenAlex counts 14 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials.

Citations
14
Most cited in
2026 (4)
Field-weighted impact
0.53
References
31
Authors
5

Abstract

FeCr matrix high-temperature self-lubricating composites reinforced by Mo, Ag, and CuO were fabricated by the powder metallurgy technique. The tribological behaviors of composites were studied at temperatures up to 800 °C. The CuO content was optimized according to the tribological results. Mo showed an obvious lubricating effect when it converted into MoO3. The bimetallic oxide system formed high-temperature solid lubricants with low shear strength. CuO reacted with MoO3 and formed CuMoO4 and Cu3Mo2O9. The composites showed an increase in the friction coefficient with the increase of CuO. However, the wear rates decreased with the increase of CuO. The critical threshold at which there was a transition of friction coefficients and wear rates from room temperature (RT) to 800 °C was 10 wt.% CuO. The Fe(Cr)-14% Mo-10.5% Ag-10% CuO composite showed the most reasonable high-temperature tribological behaviors. This was ascribed to the synergistic effects of silver, Mo, in situ formed solid lubricants (metal oxides and salt compounds), and the stable oxide film on the worn surfaces. At elevated temperatures, the dominant wear mechanism was oxidation wear.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Cui, G., Liu, Y., Gao, G., Liu, H., & Kou, Z. (2019). Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C. Materials, 13(1), 51. https://doi.org/10.3390/ma13010051

MLA 9

Cui, Gongjun, et al. “Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C.” Materials, vol. 13, no. 1, 2019, p. 51. https://doi.org/10.3390/ma13010051.

Chicago

Cui, Gongjun, Yanping Liu, Guijun Gao, Huiqiang Liu, and Ziming Kou. 2019. “Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C.” Materials 13 (1): 51. https://doi.org/10.3390/ma13010051.

Harvard

Cui, G. et al. (2019) ‘Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C’, Materials, 13(1), p. 51. doi:10.3390/ma13010051.

IEEE

G. Cui, Y. Liu, G. Gao, H. Liu, and Z. Kou, “Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C,” Materials, vol. 13, no. 1, p. 51, 2019, doi: 10.3390/ma13010051.

BibTeX

@article{cui2019microstructure,
  title     = {{Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C}},
  author    = {Cui, Gongjun and Liu, Yanping and Gao, Guijun and Liu, Huiqiang and Kou, Ziming},
  journal   = {Materials},
  year      = {2019},
  volume    = {13},
  number    = {1},
  pages     = {51},
  doi       = {10.3390/ma13010051},
  url       = {https://doi.org/10.3390/ma13010051}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202022
202122
202211
202322
202411
202522
202644

Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Tribology and Wear Analysis

  • self-lubricating composites
  • high-temperature wear
  • solid lubricants
  • CuO
  • molybdenum
  • silver
  • CuMoO4
  • Cu3Mo2O9

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Cui, G., Liu, Y., Gao, G., Liu, H., & Kou, Z. (2019). Microstructure and High-Temperature Wear Performance of FeCr Matrix Self-Lubricating Composites from Room Temperature to 800 °C. Materials, 13(1), 51. https://doi.org/10.3390/ma13010051

How many times has this paper been cited?

14 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials: sign in and open the PDF from this page.

Who wrote this paper?

Gongjun Cui, Yanping Liu, Guijun Gao, Huiqiang Liu, Ziming Kou.

What is the DOI of this paper?

10.3390/ma13010051, permanently at https://doi.org/10.3390/ma13010051. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.