Conference paper · 2017 · Open access

Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes

Guangrui Jiang, Lingfeng Chen, Hai-quan Wang, Guanghui Liu

MATEC Web of Conferences, 109, 01004 · Published 31 May 2017 · DOI 10.1051/matecconf/201710901004

Open PDFView at the publisherCite this paper

In brief

“Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes” is a 2017 conference paper by Guangrui Jiang and 3 co-authors, published in MATEC Web of Conferences. OpenAlex counts 7 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at MATEC Web of Conferences.

Citations
7
Most cited in
2024 (3)
Field-weighted impact
0.98
References
12
Authors
4

Abstract

Zn-Al-Mg alloy coating attracted much attention due to its high corrosion resistance properties, especially high anti-corrosion performance at the cut edge. As the Zn-Al-Mg alloy coating was usually produced by hot-dip galvanizing method, solidification process was considered to influence its microstructure and corrosion properties. In this work, a Zn-Al-Mg cast alloy was melted and cooled to room temperature with different solidification processes, including water quench, air cooling and furnace cooling. Microstructure of the alloy with different solidification processes was characterized by scanning electron microscopy (SEM). Result shows that the microstructure of the Zn-Al-Mg alloy are strongly influenced by solidification process. With increasing solidification rate, more Al is remained in the primary crystal. Electrochemical analysis indicates that with lowering solidification rate, the corrosion current density of the Zn-Al-Mg alloy decreases, which means higher corrosion resistance.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Jiang, G., Chen, L., Wang, H.-Q., & Liu, G. (2017). Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes. MATEC Web of Conferences, 109, 01004. https://doi.org/10.1051/matecconf/201710901004

MLA 9

Jiang, Guangrui, et al. “Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes.” MATEC Web of Conferences, vol. 109, 2017, p. 01004. https://doi.org/10.1051/matecconf/201710901004.

Chicago

Jiang, Guangrui, Lingfeng Chen, Hai-quan Wang, and Guanghui Liu. 2017. “Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes.” MATEC Web of Conferences 109: 01004. https://doi.org/10.1051/matecconf/201710901004.

Harvard

Jiang, G. et al. (2017) ‘Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes’, MATEC Web of Conferences, 109, p. 01004. doi:10.1051/matecconf/201710901004.

IEEE

G. Jiang, L. Chen, H.-Q. Wang, and G. Liu, “Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes,” MATEC Web of Conferences, vol. 109, p. 01004, 2017, doi: 10.1051/matecconf/201710901004.

BibTeX

@inproceedings{jiang2017microstructure,
  title     = {{Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes}},
  author    = {Jiang, Guangrui and Chen, Lingfeng and Wang, Hai-quan and Liu, Guanghui},
  booktitle = {MATEC Web of Conferences},
  year      = {2017},
  volume    = {109},
  pages     = {01004},
  doi       = {10.1051/matecconf/201710901004},
  url       = {https://doi.org/10.1051/matecconf/201710901004}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202211
202433
202511
202611

Its field-weighted citation impact is 0.98: it has been cited 0.98 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications

  • Zn-Al-Mg alloy
  • hot-dip galvanizing
  • solidification rate
  • microstructure
  • corrosion resistance
  • water quenching
  • air cooling
  • furnace cooling

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Jiang, G., Chen, L., Wang, H.-Q., & Liu, G. (2017). Microstructure and Corrosion Resistance Property of a Zn-AI-Mg Alloy with Different Solidification Processes. MATEC Web of Conferences, 109, 01004. https://doi.org/10.1051/matecconf/201710901004

How many times has this paper been cited?

7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at MATEC Web of Conferences: sign in and open the PDF from this page.

Who wrote this paper?

Guangrui Jiang, Lingfeng Chen, Hai-quan Wang, Guanghui Liu.

What is the DOI of this paper?

10.1051/matecconf/201710901004, permanently at https://doi.org/10.1051/matecconf/201710901004. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.