Journal article · 2013 · Open access

Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel

Soner Buytoz, Mustafa Ulutan, Serkan Islak, Bülent Kurt, Osman Nuri Çelik

Arabian Journal for Science and Engineering, 38(6), 1481–1491 · Published 31 January 2013 · DOI 10.1007/s13369-013-0536-y

Open PDFView at the publisherCite this paper

In brief

“Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel” is a 2013 journal article by Soner Buytoz and 4 co-authors, published in Arabian Journal for Science and Engineering. OpenAlex counts 77 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Arabian Journal for Science and Engineering.

Citations
77
Most cited in
2023 (15)
Field-weighted impact
2.80
References
33
Authors
5

Abstract

In this paper, wear properties of NiCrBSi–SiC coatings were investigated using the ball-on-disk wear test. In experimental study, NiCrBSi–SiC powders were sprayed using a high-velocity oxygen fuel technique on an SAE 1030 steel substrate. Powder mixtures with different weight mixing ratios, NiCrBSi + 10 wt% SiC, NiCrBSi + 20 wt% SiC and NiCrBSi + 40 wt% SiC coatings were prepared. The deposited coatings are compared in terms of their phase composition, microstructure and hardness. It is proved that the degree of mixing of the NiCrBSi and SiC components in the powder has a massive effect on the phase composition, microstructure and hardness of the coatings. Wear tests were conducted on both the uncoated and coated substrates at same normal load, speed, and wear distance. It has been determined that the coated substrates exhibit a very good tribological performance in comparison to the uncoated substrate. The increase in the adhesive wear resistance provided by the coating has been attributed to the presence of a large amount of dispersed Ni and Cr carbide and/or borides in the Ni matrix.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Buytoz, S., Ulutan, M., Islak, S., Kurt, B., & Çelik, O. N. (2013). Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel. Arabian Journal for Science and Engineering, 38(6), 1481–1491. https://doi.org/10.1007/s13369-013-0536-y

MLA 9

Buytoz, Soner, et al. “Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel.” Arabian Journal for Science and Engineering, vol. 38, no. 6, 2013, pp. 1481–1491. https://doi.org/10.1007/s13369-013-0536-y.

Chicago

Buytoz, Soner, Mustafa Ulutan, Serkan Islak, Bülent Kurt, and Osman Nuri Çelik. 2013. “Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel.” Arabian Journal for Science and Engineering 38 (6): 1481–1491. https://doi.org/10.1007/s13369-013-0536-y.

Harvard

Buytoz, S. et al. (2013) ‘Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel’, Arabian Journal for Science and Engineering, 38(6), pp. 1481–1491. doi:10.1007/s13369-013-0536-y.

IEEE

S. Buytoz, M. Ulutan, S. Islak, B. Kurt, and O. N. Çelik, “Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel,” Arabian Journal for Science and Engineering, vol. 38, no. 6, pp. 1481–1491, 2013, doi: 10.1007/s13369-013-0536-y.

BibTeX

@article{buytoz2013microstructural,
  title     = {{Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel}},
  author    = {Buytoz, Soner and Ulutan, Mustafa and Islak, Serkan and Kurt, Bülent and Çelik, Osman Nuri},
  journal   = {Arabian Journal for Science and Engineering},
  year      = {2013},
  volume    = {38},
  number    = {6},
  pages     = {1481--1491},
  doi       = {10.1007/s13369-013-0536-y},
  url       = {https://doi.org/10.1007/s13369-013-0536-y}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201711
201811
201955
202077
20211313
20221010
20231515
20241313
202544
202622

Its field-weighted citation impact is 2.80: it has been cited 2.80 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings

  • HVOF spraying
  • wear resistance
  • ball-on-disk wear test
  • coating microstructure
  • phase composition
  • coating hardness
  • borides
  • tribological properties

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Buytoz, S., Ulutan, M., Islak, S., Kurt, B., & Çelik, O. N. (2013). Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel. Arabian Journal for Science and Engineering, 38(6), 1481–1491. https://doi.org/10.1007/s13369-013-0536-y

How many times has this paper been cited?

77 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Arabian Journal for Science and Engineering: sign in and open the PDF from this page.

Who wrote this paper?

Soner Buytoz, Mustafa Ulutan, Serkan Islak, Bülent Kurt, Osman Nuri Çelik.

What is the DOI of this paper?

10.1007/s13369-013-0536-y, permanently at https://doi.org/10.1007/s13369-013-0536-y. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.