Journal article · 2022 · Open access

Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing

Krzysztof K. Dudek, Julio Andrés Iglesias Martínez, Gwenn Ulliac, Muamer Kadic

Advanced Materials, 34(14), e2110115 · Published 27 February 2022 · DOI 10.1002/adma.202110115

Open PDFView at the publisherCite this paper

In brief

“Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing” is a 2022 journal article by Krzysztof K. Dudek and 3 co-authors, published in Advanced Materials. OpenAlex counts 179 citations as of 22 November 2026, which puts it in the top 1% of works published in 2022 by citations. It is open access under a CC BY licence: the full text is free to read at Advanced Materials.

Citations
179
Most cited in
2023 (46)
Field-weighted impact
13.18
References
70
Authors
4

Abstract

Shape morphing and the possibility of having control over mechanical properties via designed deformations have attracted a lot of attention in the materials community and led to a variety of applications with an emphasis on the space industry. However, current materials normally do not allow to have a full control over the deformation pattern and often fail to replicate such behavior at low scales which is essential in flexible electronics. Thus, in this paper, novel 2D and 3D microscopic hierarchical mechanical metamaterials using mutually-competing substructures within the system that are capable of exhibiting a broad range of the highly unusual auxetic behavior are proposed. Using experiments (3D microprinted polymers) supported by computer simulations, it is shown that such ability can be controlled through geometric design parameters. Finally it is demonstrated that the considered structure can form a composite capable of shape morphing allowing it to deform to a predefined shape.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Dudek, K. K., Martínez, J. A. I., Ulliac, G., & Kadic, M. (2022). Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing. Advanced Materials, 34(14), e2110115. https://doi.org/10.1002/adma.202110115

MLA 9

Dudek, Krzysztof K., et al. “Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing.” Advanced Materials, vol. 34, no. 14, 2022, p. e2110115. https://doi.org/10.1002/adma.202110115.

Chicago

Dudek, Krzysztof K., Julio Andrés Iglesias Martínez, Gwenn Ulliac, and Muamer Kadic. 2022. “Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing.” Advanced Materials 34 (14): e2110115. https://doi.org/10.1002/adma.202110115.

Harvard

Dudek, K. K. et al. (2022) ‘Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing’, Advanced Materials, 34(14), p. e2110115. doi:10.1002/adma.202110115.

IEEE

K. K. Dudek, J. A. I. Martínez, G. Ulliac, and M. Kadic, “Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing,” Advanced Materials, vol. 34, no. 14, p. e2110115, 2022, doi: 10.1002/adma.202110115.

BibTeX

@article{dudek2022micro,
  title     = {{Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing}},
  author    = {Dudek, Krzysztof K. and Martínez, Julio Andrés Iglesias and Ulliac, Gwenn and Kadic, Muamer},
  journal   = {Advanced Materials},
  year      = {2022},
  volume    = {34},
  number    = {14},
  pages     = {e2110115},
  doi       = {10.1002/adma.202110115},
  url       = {https://doi.org/10.1002/adma.202110115}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
20221616
20234646
20244444
20254242
20263131

Its field-weighted citation impact is 13.18: it has been cited 13.18 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics

  • auxetic materials
  • shape morphing
  • microscale structures
  • 3D microprinting
  • polymer microstructure
  • geometric design parameters
  • flexible electronics
  • space applications

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Dudek, K. K., Martínez, J. A. I., Ulliac, G., & Kadic, M. (2022). Micro‐Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing. Advanced Materials, 34(14), e2110115. https://doi.org/10.1002/adma.202110115

How many times has this paper been cited?

179 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advanced Materials: sign in and open the PDF from this page.

Who wrote this paper?

Krzysztof K. Dudek, Julio Andrés Iglesias Martínez, Gwenn Ulliac, Muamer Kadic.

What is the DOI of this paper?

10.1002/adma.202110115, permanently at https://doi.org/10.1002/adma.202110115. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.