Paper · 2021 · Open access
Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique
Key engineering materials, 903, 177–182 · Published 10 November 2021 · DOI 10.4028/www.scientific.net/kem.903.177
In brief
“Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique” is a 2021 paper by Armands Leitāns and 3 co-authors, published in Key engineering materials. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.
- Citations
- 3
- Most cited in
- 2022 (1)
- Field-weighted impact
- 0.22
- References
- 10
- Authors
- 4
Abstract
Nanostructured smart coatings (NSC) based on the TiAlSi-CN composite structure elements were deposited using reactive high-power physical vapor deposition (PVD) technique. The advanced modular deposition system included up to 8 high-power magnetron sputtering devices (MSD) allowing operate them simultaneously and exceed power density of 120 W/cm2 within each device erosion zone. The novel designed NSC on bearing steel 100Cr6 substrates demonstrated enhanced mechanical and tribological properties comparably with bearing steel ones required for multifunctional high-tech applications. The deposited NSC containing TiAlSi-CN nanoparticles strengthened by elemental additives Cr and Nb exhibited microhardness as high as 2500 HV values in comparison with 750 HV of 100Cr6 steel substrates. Load-displacement curves obey Meyer’s power-law surprisingly well because power-trendline fitted ones by R-squared value of 0.9999 for all the film-samples. Tribological properties were measured under dry friction conditions between the bearing steel ball of Ø 6 mm and the film-samples’ flat surface. Coefficient of friction (CoF) ranges between 0.22-0.56 depending on a sample and load. Tribotracks worn under the friction indenter were too shallow to evaluate them by Mitutoyo profilometer SJ-500. Therefore, the wear rate was estimated as ball wear of the friction indenter.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Leitāns, A., Lungevičs, J., Kanders, U., & Boiko, I. (2021). Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique. Key engineering materials, 903, 177–182. https://doi.org/10.4028/www.scientific.net/kem.903.177
MLA 9
Leitāns, Armands, et al. “Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique.” Key engineering materials, vol. 903, 2021, pp. 177–182. https://doi.org/10.4028/www.scientific.net/kem.903.177.
Chicago
Leitāns, Armands, Jānis Lungevičs, Uldis Kanders, and Irīna Boiko. 2021. “Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique.” Key engineering materials 903: 177–182. https://doi.org/10.4028/www.scientific.net/kem.903.177.
Harvard
Leitāns, A. et al. (2021) ‘Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique’, Key engineering materials, 903, pp. 177–182. doi:10.4028/www.scientific.net/kem.903.177.
IEEE
A. Leitāns, J. Lungevičs, U. Kanders, and I. Boiko, “Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique,” Key engineering materials, vol. 903, pp. 177–182, 2021, doi: 10.4028/www.scientific.net/kem.903.177.
BibTeX
@article{leitans2021micromechanical,
title = {{Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique}},
author = {Leitāns, Armands and Lungevičs, Jānis and Kanders, Uldis and Boiko, Irīna},
journal = {Key engineering materials},
year = {2021},
volume = {903},
pages = {177--182},
doi = {10.4028/www.scientific.net/kem.903.177},
url = {https://doi.org/10.4028/www.scientific.net/kem.903.177}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2022 | 1 | |
| 2023 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.22: it has been cited 0.22 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- carbonitride coatings
- reactive sputtering
- microhardness
- tribological properties
- Coulomb friction
- friction coefficient
- wear rate
- micromechanical properties
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Leitāns, A., Lungevičs, J., Kanders, U., & Boiko, I. (2021). Micromechanical and Tribological Properties of Nanostructured Carbonitride Coatings Deposited by PVD Technique. Key engineering materials, 903, 177–182. https://doi.org/10.4028/www.scientific.net/kem.903.177
How many times has this paper been cited?
3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Key engineering materials: sign in and open the full text from this page.
Who wrote this paper?
Armands Leitāns, Jānis Lungevičs, Uldis Kanders, Irīna Boiko.
What is the DOI of this paper?
10.4028/www.scientific.net/kem.903.177, permanently at https://doi.org/10.4028/www.scientific.net/kem.903.177. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.