Journal article · 2026 · Open access

Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C

Nicole Matschiavelli, Sindy Kluge, Stefan Dultz, Sean Ting‐Shyang Wei, Artur Meleshyn, Andrea Cherkouk

Environmental Science & Technology · Published 7 November 2026 · DOI 10.1021/acs.est.6c03619

Open PDFView at the publisherCite this paper

In brief

“Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C” is a 2026 journal article by Nicole Matschiavelli and 5 co-authors, published in Environmental Science & Technology. OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Environmental Science & Technology.

Citations
0
References
85
Authors
6

Abstract

Bentonite-based geotechnical barriers constitute currently an integral part of international disposal concepts of high-level radioactive waste in claystone and crystalline rock. Elevated temperature, canister corrosion, and metabolic activity of microorganisms can influence their performance. To study these effects on processes at the cast iron-bentonite interface, microcosms were incubated with two different bentonites (B27 and GMZ-001), synthetic Opalinus Clay pore water with a high water-to-bentonite ratio and cast iron plates at 37 and 70 °C over a period of 3.5 years. No microorganisms or nutrients were added to those naturally occurring in the applied materials. Cast iron surfaces in contact with GMZ-001 bentonite appeared strongly corroded, and secondary layer-like structures formed at both temperatures. Furthermore, an accelerated release of iron into the pore water, H2 generation, and gas pressure build-up were observed. In contrast, incubation with B27 bentonite at 37 °C resulted in less corroded cast iron surfaces covered with iron sulfides, which seemed to passivate the surface and led to lower iron release, H2 generation, and gas pressure build-up. Respective B27 microcosms were dominated by metabolically active sulfate-reducing bacteria that induced iron sulfide formation. This study shows that the corrosion behavior of cast iron and changes in geochemical parameters like pH and pore water composition depend on the applied bentonite, naturally occurring microorganisms, and temperature.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Matschiavelli, N., Kluge, S., Dultz, S., Wei, S. T., Meleshyn, A., & Cherkouk, A. (2026). Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C. Environmental Science & Technology. https://doi.org/10.1021/acs.est.6c03619

MLA 9

Matschiavelli, Nicole, et al. “Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C.” Environmental Science & Technology, 2026. https://doi.org/10.1021/acs.est.6c03619.

Chicago

Matschiavelli, Nicole, Sindy Kluge, Stefan Dultz, Sean Ting‐Shyang Wei, Artur Meleshyn, and Andrea Cherkouk. 2026. “Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C.” Environmental Science & Technology. https://doi.org/10.1021/acs.est.6c03619.

Harvard

Matschiavelli, N. et al. (2026) ‘Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C’, Environmental Science & Technology. doi:10.1021/acs.est.6c03619.

IEEE

N. Matschiavelli, S. Kluge, S. Dultz, S. T. Wei, A. Meleshyn, and A. Cherkouk, “Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C,” Environmental Science & Technology, 2026, doi: 10.1021/acs.est.6c03619.

BibTeX

@article{matschiavelli2026microbial,
  title     = {{Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C}},
  author    = {Matschiavelli, Nicole and Kluge, Sindy and Dultz, Stefan and Wei, Sean Ting‐Shyang and Meleshyn, Artur and Cherkouk, Andrea},
  journal   = {Environmental Science \& Technology},
  year      = {2026},
  doi       = {10.1021/acs.est.6c03619},
  url       = {https://doi.org/10.1021/acs.est.6c03619}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Nuclear and radioactivity studies

  • cast iron corrosion
  • bentonite
  • high-level radioactive waste disposal
  • Opalinus Clay
  • sulfate-reducing bacteria
  • iron sulfide formation
  • iron release
  • hydrogen production

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Matschiavelli, N., Kluge, S., Dultz, S., Wei, S. T., Meleshyn, A., & Cherkouk, A. (2026). Microbial Influence on Corrosive Processes at the Cast Iron-Bentonite Interface during 3.5 Years of Incubation at 37 and 70 °C. Environmental Science & Technology. https://doi.org/10.1021/acs.est.6c03619

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Environmental Science & Technology: sign in and open the PDF from this page.

Who wrote this paper?

Nicole Matschiavelli, Sindy Kluge, Stefan Dultz, Sean Ting‐Shyang Wei, Artur Meleshyn, Andrea Cherkouk.

What is the DOI of this paper?

10.1021/acs.est.6c03619, permanently at https://doi.org/10.1021/acs.est.6c03619. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.