Journal article · 2013 · Open access

Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags

Konstantin Georgievich Pugin, Вайсман Яков Иосифович

Vestnik MGSU, 183–195 · Published 1 October 2013 · DOI 10.22227/1997-0935.2013.10.183-195

Open full textCite this paper

In brief

“Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags” is a 2013 journal article by Konstantin Georgievich Pugin and Вайсман Яков Иосифович, published in Vestnik MGSU. OpenAlex counts 2 citations as of 22 November 2026. It is open access: the full text is free to read at Vestnik MGSU.

Citations
2
Most cited in
2014 (1)
Field-weighted impact
1.06
Authors
2

Abstract

Metallurgy is an industry which causes great environmental stress. Ferrous waste used as the raw material in the building industry can lead to environmental pollution with heavy metals. The author offers a methodology of comparing different technologies of using the potential of waste in order to minimize the adverse influence of technology on the environment. The methodology is based on choosing the best available technologies accepted in the European Union.The methodological approaches to the development of new technologies of ferrous slag usage and identification of the existing ones were based on the concept of a complex ecosystem-based approach. The approach allows to estimate the required degree of acceptable environmental risks in the course of the implementation of a technology throughout the whole life cycle of waste: at the stage of its formation, generation of the desired product in the process of technological conversion by capturing the resource potential of waste, the use of the desired product by the consumer, and the expiry of the life cycle of a product (material) generated by the consumer from the desired product.The use of a complex ecosystem-based approach in the process of developing new technologies of slag usage and identifying the existing ones helps to judge if a technology allows achieving the following targets:technical feasibility of a technology in production quantities, on condition of achieving the degree of capturing the slag potential that complies with low-waste and wastefree categories of technological processes;the acceptable level of environmental security throughout the whole life cycle of theslag;generation of marketable end products of the pre-set quality, which exceeds thequality of other competing products;maximal prevention of the environmental damage by reducing the environmental stress on the environment and the population;availability of the technology in terms of finance and economy;social issues (new jobs, higher payments to budgets of all levels, improvement of the environmental and social image of a company, prevention of public protests as a result of favorable decisions for the protection of the environment).The proposed algorithm allows choosing the technology producing minimal environmental damage in order to maximize the economic attractiveness and technical feasibility. Использование отходов черной металлургии в качестве исходных компонентов для производства строительных материалов и конструкций может привести к загрязнению окружающей среды тяжелыми металлами. Приведена методология сравнения различных технологий использования ресурсного потенциала отходов для минимизации их негативного воздействия. Основа методологии базируется на принципах выбора наилучших доступных технологий, принятых в Европейском союзе, позволяет выбрать технологию с минимальным экологическим ущербом для окружающей среды, с максимальной экономической привлекательностью и технической возможностью.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Pugin, K. G., & Иосифович, В. Я. (2013). Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags. Vestnik MGSU, 183–195. https://doi.org/10.22227/1997-0935.2013.10.183-195

MLA 9

Pugin, Konstantin Georgievich, and Вайсман Яков Иосифович. “Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags.” Vestnik MGSU, no. 10, 2013, pp. 183–195. https://doi.org/10.22227/1997-0935.2013.10.183-195.

Chicago

Pugin, Konstantin Georgievich and Вайсман Яков Иосифович. 2013. “Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags.” Vestnik MGSU (10): 183–195. https://doi.org/10.22227/1997-0935.2013.10.183-195.

Harvard

Pugin, K. G. and Иосифович, В. Я. (2013) ‘Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags’, Vestnik MGSU, pp. 183–195. doi:10.22227/1997-0935.2013.10.183-195.

IEEE

K. G. Pugin and В. Я. Иосифович, “Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags,” Vestnik MGSU, no. 10, pp. 183–195, 2013, doi: 10.22227/1997-0935.2013.10.183-195.

BibTeX

@article{pugin2013methodological,
  title     = {{Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags}},
  author    = {Pugin, Konstantin Georgievich and Иосифович, Вайсман Яков},
  journal   = {Vestnik MGSU},
  year      = {2013},
  number    = {10},
  pages     = {183--195},
  doi       = {10.22227/1997-0935.2013.10.183-195},
  url       = {https://doi.org/10.22227/1997-0935.2013.10.183-195}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production

  • best available techniques
  • waste valorization
  • heavy metal contamination
  • building materials
  • life cycle assessment
  • environmental risk assessment
  • low-waste technologies
  • waste-free technologies

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Pugin, K. G., & Иосифович, В. Я. (2013). Methodological approaches to development and identification of the best available technologies on through the example use of ferrous slags. Vestnik MGSU, 183–195. https://doi.org/10.22227/1997-0935.2013.10.183-195

How many times has this paper been cited?

2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Vestnik MGSU: sign in and open the full text from this page.

Who wrote this paper?

Konstantin Georgievich Pugin, Вайсман Яков Иосифович.

What is the DOI of this paper?

10.22227/1997-0935.2013.10.183-195, permanently at https://doi.org/10.22227/1997-0935.2013.10.183-195. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.