Journal article · 2022 · Open access

Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion

Pritam Poddar, Mark W. Olles, Denis Cormier

Polymers, 14(17), 3553 · Published 29 August 2022 · DOI 10.3390/polym14173553

Open PDFView at the publisherCite this paper

In brief

“Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion” is a 2022 journal article by Pritam Poddar and 2 co-authors, published in Polymers. OpenAlex counts 18 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Polymers.

Citations
18
Most cited in
2025 (11)
Field-weighted impact
1.25
References
42
Authors
3

Abstract

Engineered lattice structures fabricated via additive manufacturing (AM) technologies are of great interest for many applications that require high strength and/or stiffness with minimum mass. This paper studies a novel axial lattice extrusion (ALE) AM technique that greatly enhances mechanical properties of polymeric lattice structures. When the novel ALE process was used to produce 84 mm × 84 mm × 84 mm octet truss lattice samples using fiber reinforced ABS, a total of 219,520 polymer interfaces in the lattice beams were eliminated relative to the conventional 3D printing alternative. Microscopic examination revealed near perfect alignment of the chopped carbon fibers with axes of the cylindrical beams that make up the lattice structure. The greatly enhanced beam quality with fiber reinforcement resulted in excellent mechanical properties. Compression testing yielded an average relative compressive strength of 17.4 MPa and an average modulus of 162.8 MPa. These properties rate very strongly relative to other published work, and indicate that the ALE process shows great potential for fabrication of high-strength, lightweight, large-scale, carbon-fiber composite components. The paper also contributes a modeling approach to finite element analysis (FEA) that captures the highly orthotropic properties of carbon fiber lattice beams. The diagonal shear failure mode predicted via the FEA model was in good agreement with experimentally observed results.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Poddar, P., Olles, M. W., & Cormier, D. (2022). Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion. Polymers, 14(17), 3553. https://doi.org/10.3390/polym14173553

MLA 9

Poddar, Pritam, et al. “Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion.” Polymers, vol. 14, no. 17, 2022, p. 3553. https://doi.org/10.3390/polym14173553.

Chicago

Poddar, Pritam, Mark W. Olles, and Denis Cormier. 2022. “Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion.” Polymers 14 (17): 3553. https://doi.org/10.3390/polym14173553.

Harvard

Poddar, P., Olles, M. W. and Cormier, D. (2022) ‘Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion’, Polymers, 14(17), p. 3553. doi:10.3390/polym14173553.

IEEE

P. Poddar, M. W. Olles, and D. Cormier, “Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion,” Polymers, vol. 14, no. 17, p. 3553, 2022, doi: 10.3390/polym14173553.

BibTeX

@article{poddar2022mechanical,
  title     = {{Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion}},
  author    = {Poddar, Pritam and Olles, Mark W. and Cormier, Denis},
  journal   = {Polymers},
  year      = {2022},
  volume    = {14},
  number    = {17},
  pages     = {3553},
  doi       = {10.3390/polym14173553},
  url       = {https://doi.org/10.3390/polym14173553}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202211
202322
20251111
202644

Its field-weighted citation impact is 1.25: it has been cited 1.25 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures

  • octet-truss lattice
  • carbon fiber reinforced ABS
  • fiber alignment
  • compressive strength
  • orthotropic material properties
  • diagonal shear failure
  • lightweight structures

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Poddar, P., Olles, M. W., & Cormier, D. (2022). Mechanical Response of Carbon Composite Octet Truss Structures Produced via Axial Lattice Extrusion. Polymers, 14(17), 3553. https://doi.org/10.3390/polym14173553

How many times has this paper been cited?

18 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Polymers: sign in and open the PDF from this page.

Who wrote this paper?

Pritam Poddar, Mark W. Olles, Denis Cormier.

What is the DOI of this paper?

10.3390/polym14173553, permanently at https://doi.org/10.3390/polym14173553. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.