Journal article · 2007 · Open access
Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method
Journal of the Korean Institute of Electrical and Electronic Material Engineers, 20(8), 706–710 · Published 1 August 2007 · DOI 10.4313/jkem.2007.20.8.706
In brief
“Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method” is a 2007 journal article by Hyung-Jun Cho, published in Journal of the Korean Institute of Electrical and Electronic Material Engineers. OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at Journal of the Korean Institute of Electrical and Electronic Material Engineers.
- Citations
- 0
- References
- 10
- Authors
- 1
Abstract
Ti-containing amorphous carbon (a-C:Ti) films shows attractive mechanical properties such as low friction coefficient, good adhesion to various substrate and high wear resistance. The incorporation of titanium in a-C films is able to improve the electrical conductivity, friction coefficient and adhesion to various substrates. In this study, a-C:Ti films were depositied on Si wafer by closed-field unbalanced magnetron (CFUBM) sputtering system composed two targets of carbon and titanium. The tribological properties of a-C:Ti films were investigated with the increase of DC bias voltage from 0 V to - 200 V. The hardness and elastic modulus of films increase with the increase of DC bias voltage and the maximum hardness shows 21 GPa. Also, the coefficient of friction exhibites as low as 0.07 in the ambient. In the result, the a-C:Ti film obtained by CFUBM sputtering method improved the tribological properties with the increase of DC bias volatage.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Cho, H.-J. (2007). Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method. Journal of the Korean Institute of Electrical and Electronic Material Engineers, 20(8), 706–710. https://doi.org/10.4313/jkem.2007.20.8.706
MLA 9
Cho, Hyung-Jun. “Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method.” Journal of the Korean Institute of Electrical and Electronic Material Engineers, vol. 20, no. 8, 2007, pp. 706–710. https://doi.org/10.4313/jkem.2007.20.8.706.
Chicago
Cho, Hyung-Jun. 2007. “Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method.” Journal of the Korean Institute of Electrical and Electronic Material Engineers 20 (8): 706–710. https://doi.org/10.4313/jkem.2007.20.8.706.
Harvard
Cho, H.-J. (2007) ‘Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method’, Journal of the Korean Institute of Electrical and Electronic Material Engineers, 20(8), pp. 706–710. doi:10.4313/jkem.2007.20.8.706.
IEEE
H.-J. Cho, “Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method,” Journal of the Korean Institute of Electrical and Electronic Material Engineers, vol. 20, no. 8, pp. 706–710, 2007, doi: 10.4313/jkem.2007.20.8.706.
BibTeX
@article{cho2007mechanical,
title = {{Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method}},
author = {Cho, Hyung-Jun},
journal = {Journal of the Korean Institute of Electrical and Electronic Material Engineers},
year = {2007},
volume = {20},
number = {8},
pages = {706--710},
doi = {10.4313/jkem.2007.20.8.706},
url = {https://doi.org/10.4313/jkem.2007.20.8.706}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- closed field unbalanced magnetron sputtering
- DC bias
- hardness
- elastic modulus
- friction coefficient
- tribological properties
- wear resistance
- film adhesion
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Cho, H.-J. (2007). Mechanical Properties of Ti doped Amorphous Carbon Films prepared by CFUBM Sputtering Method. Journal of the Korean Institute of Electrical and Electronic Material Engineers, 20(8), 706–710. https://doi.org/10.4313/jkem.2007.20.8.706
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of the Korean Institute of Electrical and Electronic Material Engineers: sign in and open the PDF from this page.
Who wrote this paper?
Hyung-Jun Cho.
What is the DOI of this paper?
10.4313/jkem.2007.20.8.706, permanently at https://doi.org/10.4313/jkem.2007.20.8.706. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.