Journal article · 2024 · Open access
Mechanical properties of milled and 3D-printed definitive restoration materials
International Dental Journal, 74, S175 · Published 1 October 2024 · DOI 10.1016/j.identj.2024.07.1109
In brief
“Mechanical properties of milled and 3D-printed definitive restoration materials” is a 2024 journal article by Ibrahim Can Karslı and Simge Taşın, published in International Dental Journal. OpenAlex counts 0 citations as of 18 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at International Dental Journal.
- Citations
- 0
- Authors
- 2
Abstract
With advancements in digital technology, composite resins containing ceramic particles have emerged as an option for 3-dimensionally (3D) printed definitive restorations. However, studies on the flexural properties of 3D-printed definitive resins after thermocycling are limited. The purpose of the present study was to evaluate the flexural strength (σ_fs) and flexural modulus (E_f ) of 3D-printed definitive restoration materials and to compare with those of milled materials. Rectangular-shaped specimens (4×3×17 mm) were fabricated from three 3D-printed (VarseoSmile Crownplus [VarseoSmile], Permanent Crown [PermanentCrown], and Irix Max [IrixMax]) and three milled (Cerasmart [Cerasmart], Vita Enamic [Enamic], and Katana Avencia [Avencia]) resin materials (n=12). After all specimens were subjected to 10 000 thermocycles, the σ_fs and E_f parameters of materials were determined in a 3-point bend test according to International Organization for Standardization (ISO 6872:2015). Data were statistically analyzed using the Kruskal–Wallis and Mann–Whitney U tests (α=.05). The type of material significantly influenced both σ_fs and E_f values (P<.05). The median σ_fs values were lowest for Varseosmile, followed by those for Enamic and IrixMax (P=.817), PermanentCrown, and Avencia and Cerasmart (P=.347). The lowest E_f values were found in IrixMax and Varseosmile, which were statistically similar (P=.106), while the highest E_f values were observed for Enamic (P=.001). The tested 3D-printed definitive resins appear to offer an alternative to milled resin base materials, as they exhibit acceptable flexural properties after simulating a 1-year clinical aging process.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Karslı, I. C., & Taşın, S. (2024). Mechanical properties of milled and 3D-printed definitive restoration materials. International Dental Journal, 74, S175. https://doi.org/10.1016/j.identj.2024.07.1109
MLA 9
Karslı, Ibrahim Can, and Simge Taşın. “Mechanical properties of milled and 3D-printed definitive restoration materials.” International Dental Journal, vol. 74, 2024, p. S175. https://doi.org/10.1016/j.identj.2024.07.1109.
Chicago
Karslı, Ibrahim Can and Simge Taşın. 2024. “Mechanical properties of milled and 3D-printed definitive restoration materials.” International Dental Journal 74: S175. https://doi.org/10.1016/j.identj.2024.07.1109.
Harvard
Karslı, I. C. and Taşın, S. (2024) ‘Mechanical properties of milled and 3D-printed definitive restoration materials’, International Dental Journal, 74, p. S175. doi:10.1016/j.identj.2024.07.1109.
IEEE
I. C. Karslı and S. Taşın, “Mechanical properties of milled and 3D-printed definitive restoration materials,” International Dental Journal, vol. 74, p. S175, 2024, doi: 10.1016/j.identj.2024.07.1109.
BibTeX
@article{karsl2024mechanical,
title = {{Mechanical properties of milled and 3D-printed definitive restoration materials}},
author = {Karslı, Ibrahim Can and Taşın, Simge},
journal = {International Dental Journal},
year = {2024},
volume = {74},
pages = {S175},
doi = {10.1016/j.identj.2024.07.1109},
url = {https://doi.org/10.1016/j.identj.2024.07.1109}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
- flexural strength
- flexural modulus
- thermal cycling
- dental crowns
- three-point bending
Work with this paper
Most-cited papers in Dentistry
- Periodontal Disease in Pregnancy II. Correlation Between Oral Hygiene and Periodontal ConditionJohn Silness, Harald A. Löe · Acta Odontologica Scandinavica · 1964 · 8,071 citations
- Periodontal Disease in Pregnancy I. Prevalence and SeverityHarald A. Löe, John Silness · Acta Odontologica Scandinavica · 1963 · 7,339 citations
- Microbial complexes in subgingival plaqueS. S. Socransky, Anne D. Haffajee, MaryAnn Cugini and 2 more · Journal Of Clinical Periodontology · 1998 · 5,207 citations
- Development of a Classification System for Periodontal Diseases and ConditionsGary C. Armitage · Annals of Periodontology · 1999 · 5,198 citations
- Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) for Clinical and Research Applications: Recommendations of the International RDC/TMD Consortium Network* and Orofacial Pain Special Interest Group†ERIC L. SCHIFFMAN, Richard K. Ohrbach, Edmond L. Truelove and 27 more · Journal of Oral & Facial Pain and Headache · 2014 · 4,942 citations
Questions about this paper
How do I cite this paper in APA style?
Karslı, I. C., & Taşın, S. (2024). Mechanical properties of milled and 3D-printed definitive restoration materials. International Dental Journal, 74, S175. https://doi.org/10.1016/j.identj.2024.07.1109
How many times has this paper been cited?
0 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Dental Journal: sign in and open the full text from this page.
Who wrote this paper?
Ibrahim Can Karslı, Simge Taşın.
What is the DOI of this paper?
10.1016/j.identj.2024.07.1109, permanently at https://doi.org/10.1016/j.identj.2024.07.1109. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.