Journal article · 2010 · Open access

Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys

Emanuel Santos Júnior, S.S. Camargo, Glória de Almeida Soares, Marie‐Paule Delplancke‐Ogletree

Materials Research, 13(4), 527–533 · Published 1 December 2010 · DOI 10.1590/s1516-14392010000400016

Open PDFView at the publisherCite this paper

In brief

“Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys” is a 2010 journal article by Emanuel Santos Júnior and 3 co-authors, published in Materials Research. OpenAlex counts 5 citations as of 17 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Materials Research.

Citations
5
Most cited in
2012 (1)
Field-weighted impact
0.41
References
39
Authors
4

Abstract

Ti-doped carbon coatings were deposited on TiAlV alloys by reactive dc-magnetron sputtering in Ar/CH4 mixed gas. When Ar flow increases the incorporation of Ti into films raises while the concentration of C decreases. The formed nanometric TiC crystals were more noticeable for coatings deposited with higher Ar flows. Hardness (H) and elastic modulus (E) of coatings were measured by nanoindentation. H values were in the range of 8.8-15.9 GPa and E of 53.4-113.7 GPa. Higher values for H and E were obtained for films containing larger amount of TiC-phase. The presence of TiC crystals increased the coefficient of friction (COF) from 0.07 to 0.28 in scratch tests. Tribological experiments were carried out by using a pin-on-disk apparatus in air and in liquid. COF values ranged from 0.10 to 0.50 for tests in air. Despite of presenting higher COF, tests performed in liquid resulted in less pronounced wear tracks.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Júnior, E. S., Camargo, S., Soares, G. D. A., & Delplancke‐Ogletree, M. (2010). Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys. Materials Research, 13(4), 527–533. https://doi.org/10.1590/s1516-14392010000400016

MLA 9

Júnior, Emanuel Santos, et al. “Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys.” Materials Research, vol. 13, no. 4, 2010, pp. 527–533. https://doi.org/10.1590/s1516-14392010000400016.

Chicago

Júnior, Emanuel Santos, S.S. Camargo, Glória de Almeida Soares, and Marie‐Paule Delplancke‐Ogletree. 2010. “Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys.” Materials Research 13 (4): 527–533. https://doi.org/10.1590/s1516-14392010000400016.

Harvard

Júnior, E. S. et al. (2010) ‘Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys’, Materials Research, 13(4), pp. 527–533. doi:10.1590/s1516-14392010000400016.

IEEE

E. S. Júnior, S. Camargo, G. D. A. Soares, and M. Delplancke‐Ogletree, “Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys,” Materials Research, vol. 13, no. 4, pp. 527–533, 2010, doi: 10.1590/s1516-14392010000400016.

BibTeX

@article{junior2010mechanical,
  title     = {{Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys}},
  author    = {Júnior, Emanuel Santos and Camargo, S.S. and Soares, Glória de Almeida and Delplancke‐Ogletree, Marie‐Paule},
  journal   = {Materials Research},
  year      = {2010},
  volume    = {13},
  number    = {4},
  pages     = {527--533},
  doi       = {10.1590/s1516-14392010000400016},
  url       = {https://doi.org/10.1590/s1516-14392010000400016}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201211
201911
202011
202211
202511

Its field-weighted citation impact is 0.41: it has been cited 0.41 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • TiC nanoparticles
  • Ti-Al-V alloy
  • reactive magnetron sputtering
  • hardness
  • elastic modulus
  • friction coefficient
  • tribology
  • wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Júnior, E. S., Camargo, S., Soares, G. D. A., & Delplancke‐Ogletree, M. (2010). Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys. Materials Research, 13(4), 527–533. https://doi.org/10.1590/s1516-14392010000400016

How many times has this paper been cited?

5 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials Research: sign in and open the PDF from this page.

Who wrote this paper?

Emanuel Santos Júnior, S.S. Camargo, Glória de Almeida Soares, Marie‐Paule Delplancke‐Ogletree.

What is the DOI of this paper?

10.1590/s1516-14392010000400016, permanently at https://doi.org/10.1590/s1516-14392010000400016. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.