Journal article · 2021 · Open access

Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions

Mingwen Bai, Liuquan Yang, Jiayu Li, Lun Luo, Shi‐Kuan Sun, Beverley J. Inkson

Wear, 484-485, 204046 · Published 24 July 2021 · DOI 10.1016/j.wear.2021.204046

Open full textCite this paper

In brief

“Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions” is a 2021 journal article by Mingwen Bai and 5 co-authors, published in Wear. OpenAlex counts 85 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Wear.

Citations
85
Most cited in
2026 (22)
Field-weighted impact
5.29
References
39
Authors
6

Abstract

The mechanical and tribological properties of three types of diamond like carbon (DLC) coatings, i.e., non-doped, Si-doped, and W-doped DLC, are evaluated. Dry reciprocating sliding wear tests were performed to evaluate the effect of sliding frequency/velocity on friction, adhesion, and wear. The degree of graphitization of non-doped and W-doped DLC increases with sliding velocity, which results in a lower coefficient of friction (COF), and a decrease in wear rate. Si-doped DLC, however, exhibits distinct friction behaviour, with increasing COF and severe fluctuations in friction at higher sliding velocities. In Si-DLC frictional heating drives the formation of an oxide-rich tribofilm and large amounts of Si-rich oxide wear debris that are both adhesive and abrasive. The oxide-rich tribofilm, and lack of surface graphitization, result in the severe fluctuations of Si-DLC friction via stick-slip and surface fracture/wear mechanisms, and significantly increased COF and wear rates at higher sliding velocities.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Bai, M., Yang, L., Li, J., Luo, L., Sun, S., & Inkson, B. J. (2021). Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions. Wear, 484-485, 204046. https://doi.org/10.1016/j.wear.2021.204046

MLA 9

Bai, Mingwen, et al. “Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions.” Wear, vol. 484-485, 2021, p. 204046. https://doi.org/10.1016/j.wear.2021.204046.

Chicago

Bai, Mingwen, Liuquan Yang, Jiayu Li, Lun Luo, Shi‐Kuan Sun, and Beverley J. Inkson. 2021. “Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions.” Wear 484-485: 204046. https://doi.org/10.1016/j.wear.2021.204046.

Harvard

Bai, M. et al. (2021) ‘Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions’, Wear, 484-485, p. 204046. doi:10.1016/j.wear.2021.204046.

IEEE

M. Bai, L. Yang, J. Li, L. Luo, S. Sun, and B. J. Inkson, “Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions,” Wear, vol. 484-485, p. 204046, 2021, doi: 10.1016/j.wear.2021.204046.

BibTeX

@article{bai2021mechanical,
  title     = {{Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions}},
  author    = {Bai, Mingwen and Yang, Liuquan and Li, Jiayu and Luo, Lun and Sun, Shi‐Kuan and Inkson, Beverley J.},
  journal   = {Wear},
  year      = {2021},
  volume    = {484-485},
  pages     = {204046},
  doi       = {10.1016/j.wear.2021.204046},
  url       = {https://doi.org/10.1016/j.wear.2021.204046}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202111
20221414
20231818
20241515
20251515
20262222

Its field-weighted citation impact is 5.29: it has been cited 5.29 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • diamond-like carbon films
  • silicon doping
  • tungsten doping
  • friction coefficient
  • wear rate
  • tribofilm
  • frictional heating
  • stick-slip

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Bai, M., Yang, L., Li, J., Luo, L., Sun, S., & Inkson, B. J. (2021). Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions. Wear, 484-485, 204046. https://doi.org/10.1016/j.wear.2021.204046

How many times has this paper been cited?

85 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Wear: sign in and open the full text from this page.

Who wrote this paper?

Mingwen Bai, Liuquan Yang, Jiayu Li, Lun Luo, Shi‐Kuan Sun, Beverley J. Inkson.

What is the DOI of this paper?

10.1016/j.wear.2021.204046, permanently at https://doi.org/10.1016/j.wear.2021.204046. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.