Paper · 2000 · Open access
Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565
Published 1 January 2000 · DOI 10.26153/tsw/3083
In brief
“Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565” is a 2000 paper by Sean Stephens and 4 co-authors. OpenAlex counts 14 citations as of 22 November 2026. It is open access: the full text is free to read at Texas Digital Library (University of Texas).
- Citations
- 14
- Most cited in
- 2015 (2)
- Field-weighted impact
- 0.25
- Authors
- 5
Abstract
Solid Freeform Fabrication to date has largely been applied in prototype fabrication or fabrication of patterns for conventional manufacturing methods. However, many opportunities exist for using SFF for manufacturing the actual product. In particular, those applications that require or can be enhanced by custom geometric design seem to be well suited for SFF techniques. In this paper we describe the design of a prosthesis socket for a below-the-knee amputee. This socket is specifically designed to provide compliance in selected areas to enhance the comfort of the wearer. Additionally, the socket contains an integrated pylon fitting that provides a structurally superior connection while also improving the comfort of the wearer. The socket was manufactured using selective laser sintering, mated to a pylon and foot, and fitted to the patient for gait analysis. The results of the analysis indicate an improved fit is possible with manufacture by SLS.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Stephens, S., Crawford, R., William, R., Gitter, A. J., & Bosker, G. W. (2000). Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565. https://doi.org/10.26153/tsw/3083
MLA 9
Stephens, Sean, et al. “Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565.” 2000. https://doi.org/10.26153/tsw/3083.
Chicago
Stephens, Sean, Richard Crawford, Rogers, William, Andrew J. Gitter, and Gordon W. Bosker. 2000. “Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565.” https://doi.org/10.26153/tsw/3083.
Harvard
Stephens, S. et al. (2000) ‘Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565’. doi:10.26153/tsw/3083.
IEEE
S. Stephens, R. Crawford, R. William, A. J. Gitter, and G. W. Bosker, “Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565,” 2000, doi: 10.26153/tsw/3083.
BibTeX
@article{stephens2000manufacture,
title = {{Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565}},
author = {Stephens, Sean and Crawford, Richard and William, Rogers, and Gitter, Andrew J. and Bosker, Gordon W.},
year = {2000},
doi = {10.26153/tsw/3083},
url = {https://doi.org/10.26153/tsw/3083}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2014 | 1 | |
| 2015 | 2 | |
| 2016 | 2 | |
| 2018 | 1 | |
| 2019 | 1 | |
| 2020 | 2 | |
| 2023 | 2 | |
| 2025 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.25: it has been cited 0.25 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Prosthetics and Rehabilitation Robotics
- prosthetic socket
- selective laser sintering
- transtibial amputation
- additive manufacturing
- prosthesis comfort
- gait analysis
- socket fit
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Stephens, S., Crawford, R., William, R., Gitter, A. J., & Bosker, G. W. (2000). Manufacture of Compliant Prosthesis Sockets using Selective Laser Sintering 565. https://doi.org/10.26153/tsw/3083
How many times has this paper been cited?
14 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Texas Digital Library (University of Texas): sign in and open the full text from this page.
Who wrote this paper?
Sean Stephens, Richard Crawford, Rogers, William, Andrew J. Gitter, Gordon W. Bosker.
What is the DOI of this paper?
10.26153/tsw/3083, permanently at https://doi.org/10.26153/tsw/3083. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.