Journal article · 2018 · Open access

Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B

Zhaojun Ren, Shengguan Qu, Yalong Zhang, Xiaoqiang Li, Chao Qin Yang

Metals, 8(10), 850 · Published 19 October 2018 · DOI 10.3390/met8100850

Open PDFView at the publisherCite this paper

In brief

“Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B” is a 2018 journal article by Zhaojun Ren and 4 co-authors, published in Metals. OpenAlex counts 17 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Metals.

Citations
17
Most cited in
2022 (5)
Field-weighted impact
0.64
References
51
Authors
5

Abstract

In this paper, TiAlN-coated cemented carbide tools with chip groove were used to machine titanium alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B under dry conditions in order to investigate the machining performance of this cutting tool. Wear mechanisms of TiAlN-coated cemented carbide tools with chip groove were studied and compared to the uncoated cemented carbide tools (K20) with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). The effects of the cutting parameters (cutting speed, feed rate and depth of cut) on tool life and workpiece surface roughness of TiAlN-coated cemented carbide tools with chip groove were studied with a 3D super-depth-of-field instrument and a surface profile instrument, respectively. The results showed that the TiAlN-coated cemented carbide tools with chip groove were more suitable for machining TC7. The adhesive wear, diffusion wear, crater wear, and stripping occurred during machining, and the large built-up edge formed on the rake face. The optimal cutting parameters of TiAlN-coated cemented carbide tools were acquired. The surface roughness Ra decreased with the increase of the cutting speed, while it increased with the increase of the feed rate.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Ren, Z., Qu, S., Zhang, Y., Li, X., & Yang, C. Q. (2018). Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B. Metals, 8(10), 850. https://doi.org/10.3390/met8100850

MLA 9

Ren, Zhaojun, et al. “Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B.” Metals, vol. 8, no. 10, 2018, p. 850. https://doi.org/10.3390/met8100850.

Chicago

Ren, Zhaojun, Shengguan Qu, Yalong Zhang, Xiaoqiang Li, and Chao Qin Yang. 2018. “Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B.” Metals 8 (10): 850. https://doi.org/10.3390/met8100850.

Harvard

Ren, Z. et al. (2018) ‘Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B’, Metals, 8(10), p. 850. doi:10.3390/met8100850.

IEEE

Z. Ren, S. Qu, Y. Zhang, X. Li, and C. Q. Yang, “Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B,” Metals, vol. 8, no. 10, p. 850, 2018, doi: 10.3390/met8100850.

BibTeX

@article{ren2018machining,
  title     = {{Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B}},
  author    = {Ren, Zhaojun and Qu, Shengguan and Zhang, Yalong and Li, Xiaoqiang and Yang, Chao Qin},
  journal   = {Metals},
  year      = {2018},
  volume    = {8},
  number    = {10},
  pages     = {850},
  doi       = {10.3390/met8100850},
  url       = {https://doi.org/10.3390/met8100850}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202022
202111
202255
202344
202422
202511
202611

Its field-weighted citation impact is 0.64: it has been cited 0.64 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • TiAlN coating
  • cemented carbide tools
  • titanium alloy machining
  • dry machining
  • tool wear mechanisms
  • adhesive wear
  • diffusion wear
  • crater wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Ren, Z., Qu, S., Zhang, Y., Li, X., & Yang, C. Q. (2018). Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B. Metals, 8(10), 850. https://doi.org/10.3390/met8100850

How many times has this paper been cited?

17 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Metals: sign in and open the PDF from this page.

Who wrote this paper?

Zhaojun Ren, Shengguan Qu, Yalong Zhang, Xiaoqiang Li, Chao Qin Yang.

What is the DOI of this paper?

10.3390/met8100850, permanently at https://doi.org/10.3390/met8100850. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.