Journal article · 2020 · Open access

Machined helical springs from NiTiHf shape memory alloy

Othmane Benafan, Darrell J. Gaydosh

Smart Materials and Structures, 29(12), 125001 · Published 26 October 2020 · DOI 10.1088/1361-665x/abbec9

Open PDFView at the publisherCite this paper

In brief

“Machined helical springs from NiTiHf shape memory alloy” is a 2020 journal article by Othmane Benafan and Darrell J. Gaydosh, published in Smart Materials and Structures. OpenAlex counts 7 citations as of 22 November 2026. It is open access: the full text is free to read at Smart Materials and Structures.

Citations
7
Most cited in
2022 (2)
Field-weighted impact
0.44
References
28
Authors
2

Abstract

Machined helical springs were fabricated from rod stock using a Ni-rich Ni 50.3 Ti 29.7 Hf 20 (at. %) high-temperature shape memory alloy. Springs with three different spring rates of 35, 87.5, and 175.1 N mm −1 were designed, and the rectangular cross-section spring formulas were used to approximate the deflection and shear stresses. Springs were then subjected to isothermal testing at room temperature and constant-force thermal cycling experiments at varying loads. Actuation displacements on the order of 19 mm were obtained for starting flexures of 20 mm in length, resulting in nearly 95% total actuation extension. Thermal cycling under loads ranging from 0 to ∼500 N (stresses of 0 to ∼500 MPa) showed higher actuation displacements for springs with the lowest spring rates compared to the stiffer, higher spring rate counterpart. With increasing applied load, actuation displacements were still increasing even at stresses near 500 MPa (no maxima reached), indicating more actuation potential at higher loads. Two-way shape memory effect was assessed at 0 load and found to be very minimal (less than 3 mm) due to lack of training.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Benafan, O., & Gaydosh, D. J. (2020). Machined helical springs from NiTiHf shape memory alloy. Smart Materials and Structures, 29(12), 125001. https://doi.org/10.1088/1361-665x/abbec9

MLA 9

Benafan, Othmane, and Darrell J. Gaydosh. “Machined helical springs from NiTiHf shape memory alloy.” Smart Materials and Structures, vol. 29, no. 12, 2020, p. 125001. https://doi.org/10.1088/1361-665x/abbec9.

Chicago

Benafan, Othmane and Darrell J. Gaydosh. 2020. “Machined helical springs from NiTiHf shape memory alloy.” Smart Materials and Structures 29 (12): 125001. https://doi.org/10.1088/1361-665x/abbec9.

Harvard

Benafan, O. and Gaydosh, D. J. (2020) ‘Machined helical springs from NiTiHf shape memory alloy’, Smart Materials and Structures, 29(12), p. 125001. doi:10.1088/1361-665x/abbec9.

IEEE

O. Benafan and D. J. Gaydosh, “Machined helical springs from NiTiHf shape memory alloy,” Smart Materials and Structures, vol. 29, no. 12, p. 125001, 2020, doi: 10.1088/1361-665x/abbec9.

BibTeX

@article{benafan2020machined,
  title     = {{Machined helical springs from NiTiHf shape memory alloy}},
  author    = {Benafan, Othmane and Gaydosh, Darrell J.},
  journal   = {Smart Materials and Structures},
  year      = {2020},
  volume    = {29},
  number    = {12},
  pages     = {125001},
  doi       = {10.1088/1361-665x/abbec9},
  url       = {https://doi.org/10.1088/1361-665x/abbec9}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202111
202222
202322
202411
202611

Its field-weighted citation impact is 0.44: it has been cited 0.44 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • helical springs
  • high-temperature shape memory alloys
  • spring rate
  • actuation displacement
  • two-way shape memory effect
  • shear stress
  • spring deflection

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Benafan, O., & Gaydosh, D. J. (2020). Machined helical springs from NiTiHf shape memory alloy. Smart Materials and Structures, 29(12), 125001. https://doi.org/10.1088/1361-665x/abbec9

How many times has this paper been cited?

7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Smart Materials and Structures: sign in and open the PDF from this page.

Who wrote this paper?

Othmane Benafan, Darrell J. Gaydosh.

What is the DOI of this paper?

10.1088/1361-665x/abbec9, permanently at https://doi.org/10.1088/1361-665x/abbec9. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.