Journal article · 2014 · Open access
Lubricity of carbon nitride coatings in humid nitrogen gas environment
Transactions of the JSME (in Japanese), 80(820), DSM0388 · Published 1 January 2014 · DOI 10.1299/transjsme.2014dsm0388
In brief
“Lubricity of carbon nitride coatings in humid nitrogen gas environment” is a 2014 journal article by Naohiro Yamada and 2 co-authors, published in Transactions of the JSME (in Japanese). OpenAlex counts 1 citations as of 17 November 2026. It is open access: the full text is free to read at Transactions of the JSME (in Japanese).
- Citations
- 1
- Most cited in
- 2021 (1)
- References
- 11
- Authors
- 3
Abstract
In this study, friction coefficient of 0.018 in averaged value could be achieved under humid nitrogen gas condition (0.5-40 %RH) with frictional pair of amorphous carbon nitride (CN X ) coatings.The coatings investigated were deposited onto Si 3 N 4 ball and disk substrates by ion beam mixing (IBM) method.We performed friction tests of CN X /CN X under nitrogen gas condition.When CN X -coated Si 3 N 4 disk is rubbed by Si 3 N 4 ball under ambient air and then the ball was changed to CN X -coated one, friction coefficient of 0.019 in averaged value was achieved at the end of friction tests under 0.4 N load conditions.We investigated further concerning humidity and load dependence on friction properties, and finally we could find that friction properties are classified into three types in relation to friction coefficient and friction profile (TypeⅠ; Stable friction coefficient µ s is over 0.05, TypeⅡ; Friction coefficient increases rapidly just after start of friction test but it dropped out and µ s reached below 0.05, TypeⅢ; Friction coefficient is below 0.05 from the beginning).In case of TypeⅢ, friction coefficient less than 0.02 maintained with gradual increase of relative humidity.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Yamada, N., Takeno, T., & Adachi, K. (2014). Lubricity of carbon nitride coatings in humid nitrogen gas environment. Transactions of the JSME (in Japanese), 80(820), DSM0388. https://doi.org/10.1299/transjsme.2014dsm0388
MLA 9
Yamada, Naohiro, et al. “Lubricity of carbon nitride coatings in humid nitrogen gas environment.” Transactions of the JSME (in Japanese), vol. 80, no. 820, 2014, p. DSM0388. https://doi.org/10.1299/transjsme.2014dsm0388.
Chicago
Yamada, Naohiro, Takanori Takeno, and Koshi Adachi. 2014. “Lubricity of carbon nitride coatings in humid nitrogen gas environment.” Transactions of the JSME (in Japanese) 80 (820): DSM0388. https://doi.org/10.1299/transjsme.2014dsm0388.
Harvard
Yamada, N., Takeno, T. and Adachi, K. (2014) ‘Lubricity of carbon nitride coatings in humid nitrogen gas environment’, Transactions of the JSME (in Japanese), 80(820), p. DSM0388. doi:10.1299/transjsme.2014dsm0388.
IEEE
N. Yamada, T. Takeno, and K. Adachi, “Lubricity of carbon nitride coatings in humid nitrogen gas environment,” Transactions of the JSME (in Japanese), vol. 80, no. 820, p. DSM0388, 2014, doi: 10.1299/transjsme.2014dsm0388.
BibTeX
@article{yamada2014lubricity,
title = {{Lubricity of carbon nitride coatings in humid nitrogen gas environment}},
author = {Yamada, Naohiro and Takeno, Takanori and Adachi, Koshi},
journal = {Transactions of the JSME (in Japanese)},
year = {2014},
volume = {80},
number = {820},
pages = {DSM0388},
doi = {10.1299/transjsme.2014dsm0388},
url = {https://doi.org/10.1299/transjsme.2014dsm0388}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- carbon nitride coatings
- amorphous carbon nitride
- friction coefficient
- lubricity
- relative humidity
- ion beam mixing
- Si3N4 substrate
- load dependence
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Yamada, N., Takeno, T., & Adachi, K. (2014). Lubricity of carbon nitride coatings in humid nitrogen gas environment. Transactions of the JSME (in Japanese), 80(820), DSM0388. https://doi.org/10.1299/transjsme.2014dsm0388
How many times has this paper been cited?
1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Transactions of the JSME (in Japanese): sign in and open the PDF from this page.
Who wrote this paper?
Naohiro Yamada, Takanori Takeno, Koshi Adachi.
What is the DOI of this paper?
10.1299/transjsme.2014dsm0388, permanently at https://doi.org/10.1299/transjsme.2014dsm0388. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.