Paper · 2015 · Open access
Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts
ETA Florence, 988–994 · Published 1 January 2015 · DOI 10.5071/23rdeubce2015-3co.15.1
In brief
“Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts” is a 2015 paper by James Aluha and 3 co-authors, published in ETA Florence. OpenAlex counts 6 citations as of 18 November 2026. It is open access: the full text is free to read at ETA Florence.
- Citations
- 6
- Most cited in
- 2017 (3)
- Field-weighted impact
- 11.64
- References
- 16
- Authors
- 4
Abstract
Marketable fuel production from biomass through Fischer-Tropsch synthesis (FTS) process is the main objective of this work. Today, there is need for higher performance FTS catalysts that will lead to sustainable production of biofuels because of the global escalating energy prices, developing environmental concerns and more stringent legislation, particularly the push towards sulphur-free diesel. By developing efficient non-porous catalysts in the nanometric range, operating in the diffusion-controlled 3-phase FTS regime is avoided; this is a must in this direction and constitutes an experimentally proven choice. Potential carbon-supported bimetallic formulations based on iron and cobalt, synthesised by plasma-spray method were produced and tested as FTS nanocatalysts in a continuously-stirred slurry tank reactor (CSSTR) at 260.C, 20-bar pressure and gas hourly specific velocity (GHSV) of 3,600 ml.g-1.h-1 for 24 h. Three catalytic formulations tested were: 30%Co-70%Fe, 50%Co-50%Fe, and 80%Co-20%Fe. Their analysis by Transmission Electron Microscopy (TEM) indicated an average particle size of 9.1, 14.4 and 8.9 nm, and BET specific surface areas of 89, 89 and 65 m2.g-1 respectively. Overall, the materials showed comparable selectivity of ~76% towards the production of C5-C22 (petrol + diesel fractions), but catalyst activity decreased in the order of 30%Co-70%Fe >> 80%Co-20%Fe > 50%Co-50%Fe, with carbon monoxide (CO) conversions of 50, 42 and 35% respectively after 24 h on stream.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Aluha, J., Braidy, N., Dalai, A. K., & Abatzoglou, N. (2015). Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts. ETA Florence, 988–994. https://doi.org/10.5071/23rdeubce2015-3co.15.1
MLA 9
Aluha, James, et al. “Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts.” ETA Florence, 2015, pp. 988–994. https://doi.org/10.5071/23rdeubce2015-3co.15.1.
Chicago
Aluha, James, Nadi Braidy, Ajay Kumar Dalai, and Nicolas Abatzoglou. 2015. “Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts.” ETA Florence: 988–994. https://doi.org/10.5071/23rdeubce2015-3co.15.1.
Harvard
Aluha, J. et al. (2015) ‘Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts’, ETA Florence, pp. 988–994. doi:10.5071/23rdeubce2015-3co.15.1.
IEEE
J. Aluha, N. Braidy, A. K. Dalai, and N. Abatzoglou, “Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts,” ETA Florence, pp. 988–994, 2015, doi: 10.5071/23rdeubce2015-3co.15.1.
BibTeX
@article{aluha2015temperature,
title = {{Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts}},
author = {Aluha, James and Braidy, Nadi and Dalai, Ajay Kumar and Abatzoglou, Nicolas},
journal = {ETA Florence},
year = {2015},
pages = {988--994},
doi = {10.5071/23rdeubce2015-3co.15.1},
url = {https://doi.org/10.5071/23rdeubce2015-3co.15.1}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2016 | 2 | |
| 2017 | 3 | |
| 2024 | 1 |
Its field-weighted citation impact is 11.64: it has been cited 11.64 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming
- Fischer-Tropsch synthesis
- low-temperature catalysis
- biomass fuel
- CO conversion
- product selectivity
- diesel fuel production
Work with this paper
Most-cited papers in Chemical Engineering
- Viscoelastic Properties of PolymersJohn D. Ferry, Henry S. Myers · Journal of The Electrochemical Society · 1961 · 13,517 citations
- Chemical Reaction EngineeringOctave Levenspiel · Industrial & Engineering Chemistry Research · 1999 · 10,032 citations
- The theory of polymer dynamicsMasao Doi, Sam F Edwards · 1986 · 8,928 citations
- Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and EngineeringGeorge W. Huber, Sara Iborra, Avelino Corma · Chemical Reviews · 2006 · 7,825 citations
- Convective Transport in NanofluidsJacopo Buongiorno · ASME Journal of Heat and Mass Transfer · 2005 · 7,131 citations
Questions about this paper
How do I cite this paper in APA style?
Aluha, J., Braidy, N., Dalai, A. K., & Abatzoglou, N. (2015). Low-Temperature Fischer-Tropsch Synthesis with Carbon-Supported Nanometric Iron-Cobalt Catalysts. ETA Florence, 988–994. https://doi.org/10.5071/23rdeubce2015-3co.15.1
How many times has this paper been cited?
6 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at ETA Florence: sign in and open the full text from this page.
Who wrote this paper?
James Aluha, Nadi Braidy, Ajay Kumar Dalai, Nicolas Abatzoglou.
What is the DOI of this paper?
10.5071/23rdeubce2015-3co.15.1, permanently at https://doi.org/10.5071/23rdeubce2015-3co.15.1. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.