Paper · 2012 · Open access

Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells

Pasquale Morvillo, Francesca Parenti, Rosita Diana, E. Bobeico, Adele Mucci, Francesco Tassinari, Luisa Schenetti, C. Minarini

IRIS UNIMORE (University of Modena and Reggio Emilia), 2907–2910 · Published 1 January 2012 · DOI 10.4229/27theupvsec2012-3dv.4.36

Open full textCite this paper

In brief

“Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells” is a 2012 paper by Pasquale Morvillo and 7 co-authors, published in IRIS UNIMORE (University of Modena and Reggio Emilia). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at EU PVSEC.

Citations
0
Authors
8

Abstract

Polymer solar cells have evolved as a promising cost-effective alternative to silicon-based ones. However, low efficiency of these plastic devices limits their feasibility for commercial use. The efficiencies of polymer photovoltaic cells got a major boost with the introduction of the bulk heterojunction (BHJ) configuration consisting of an interpenetrating network of electron donor and acceptor materials. Recently, benzodithiophene based polymers has been used as electron donors in polymer solar cells showing very promising properties such as an increasing charge transport and a red shift of the absorption spectra. In this work the synthesis, the spectroscopic and photovoltaic characterization of a copolymer based on (octylsulfanyl)bithiophene and benzo[1,2-b:4,5-b’]dithiophene units and a polymer based on (butylsulfanyl)bithiophene unit are reported. BHJ solar cells using these polymers as donor materials blended with [70]PCBM as acceptor were prepared and investigated. The geometry of the device is: glass/ITO/PEDOT:PSS/blend/Ca/Al. The electrical performances of the cells were compared in order to study the influence of the benzodithiophene unit on the polymer backbone. The power conversion efficiency of the best realized polymer solar cell is 2.3% under 100 mW/cm2 AM 1.5G illumination.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Morvillo, P., Parenti, F., Diana, R., Bobeico, E., Mucci, A., Tassinari, F., Schenetti, L., & Minarini, C. (2012). Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells. IRIS UNIMORE (University of Modena and Reggio Emilia), 2907–2910. https://doi.org/10.4229/27theupvsec2012-3dv.4.36

MLA 9

Morvillo, Pasquale, et al. “Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells.” IRIS UNIMORE (University of Modena and Reggio Emilia), 2012, pp. 2907–2910. https://doi.org/10.4229/27theupvsec2012-3dv.4.36.

Chicago

Morvillo, Pasquale, Francesca Parenti, Rosita Diana, E. Bobeico, Adele Mucci, Francesco Tassinari, Luisa Schenetti, and C. Minarini. 2012. “Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells.” IRIS UNIMORE (University of Modena and Reggio Emilia): 2907–2910. https://doi.org/10.4229/27theupvsec2012-3dv.4.36.

Harvard

Morvillo, P. et al. (2012) ‘Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells’, IRIS UNIMORE (University of Modena and Reggio Emilia), pp. 2907–2910. doi:10.4229/27theupvsec2012-3dv.4.36.

IEEE

P. Morvillo et al., “Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells,” IRIS UNIMORE (University of Modena and Reggio Emilia), pp. 2907–2910, 2012, doi: 10.4229/27theupvsec2012-3dv.4.36.

BibTeX

@article{morvillo2012bandgap,
  title     = {{Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells}},
  author    = {Morvillo, Pasquale and Parenti, Francesca and Diana, Rosita and Bobeico, E. and Mucci, Adele and Tassinari, Francesco and Schenetti, Luisa and Minarini, C.},
  journal   = {IRIS UNIMORE (University of Modena and Reggio Emilia)},
  year      = {2012},
  pages     = {2907--2910},
  doi       = {10.4229/27theupvsec2012-3dv.4.36},
  url       = {https://doi.org/10.4229/27theupvsec2012-3dv.4.36}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics

  • polymer solar cells
  • benzodithiophene
  • electron donor materials
  • bulk heterojunction
  • power conversion efficiency
  • polymer synthesis
  • photovoltaic characterization

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Morvillo, P., Parenti, F., Diana, R., Bobeico, E., Mucci, A., Tassinari, F., Schenetti, L., & Minarini, C. (2012). Low Bandgap Copolymers with (Alkylsulfanyl) Bithiophene Unit for Efficient Polymer Solar Cells. IRIS UNIMORE (University of Modena and Reggio Emilia), 2907–2910. https://doi.org/10.4229/27theupvsec2012-3dv.4.36

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at EU PVSEC: sign in and open the full text from this page.

Who wrote this paper?

Pasquale Morvillo, Francesca Parenti, Rosita Diana, E. Bobeico, Adele Mucci, Francesco Tassinari, Luisa Schenetti, C. Minarini.

What is the DOI of this paper?

10.4229/27theupvsec2012-3dv.4.36, permanently at https://doi.org/10.4229/27theupvsec2012-3dv.4.36. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.