Journal article · 2014 · Open access

Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition

Su Lin Chen, Bin Shen, Fang Hong Sun

Advanced materials research, 1017, 429–434 · Published 1 September 2014 · DOI 10.4028/www.scientific.net/amr.1017.429

Open full textCite this paper

In brief

“Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition” is a 2014 journal article by Su Lin Chen and 2 co-authors, published in Advanced materials research. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.

Citations
0
References
6
Authors
3

Abstract

In the present study, the long-duration frictional and wear performance of the MCD/DLC (Micro-crystalline Diamond / Diamond-like Carbon) bilayered film are investigated under water-lubricating conditions. All friction tests are carried out on a rotation “ball-on-plate” tribotester where the MCD/DLC is slid against with a Φ 6.0 mm Si3N4ball and the whole sliding contact is immersed in deionized water during the sliding process. A full factorial experimental plan is conducted with four sliding velocities ranging from 0.126 to 0.503 m/s and four normal loads from 2 to 8 N. The duration of each sliding process is 24 h. For the sake of comparability, conventional MCD and NCD (nanocrystalline Diamond) films are also adopted under each sliding condition. The results show that the stable coefficient of friction (COF) of MCD/DLC film is ranging from 0.025 to 0.12 under the water-lubricating condition, comparable with the NCD film but much lower than that of single-layered MCD film; in contrast, the top-layered DLC film does not show beneficial effect on enhancing the sliding stability of single-layered diamond films. Moreover, its specific wear rate is estimated at the level of 10-8mm3N-1m-1, higher than that of MCD or NCD films. The sliding interface is under boundary lubrication condition, high normal load causes more prominent mechanical interactions between two contacted surfaces and thus produces a smoother and cleaner equilibrium sliding interface, which finally results in the decreasing tendency of stable COF as the load rises. Comparatively, the sliding velocity does not exhibit evident influence on the stable COF of the MCD/DLC film.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Chen, S. L., Shen, B., & Sun, F. H. (2014). Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition. Advanced materials research, 1017, 429–434. https://doi.org/10.4028/www.scientific.net/amr.1017.429

MLA 9

Chen, Su Lin, et al. “Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition.” Advanced materials research, vol. 1017, 2014, pp. 429–434. https://doi.org/10.4028/www.scientific.net/amr.1017.429.

Chicago

Chen, Su Lin, Bin Shen, and Fang Hong Sun. 2014. “Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition.” Advanced materials research 1017: 429–434. https://doi.org/10.4028/www.scientific.net/amr.1017.429.

Harvard

Chen, S. L., Shen, B. and Sun, F. H. (2014) ‘Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition’, Advanced materials research, 1017, pp. 429–434. doi:10.4028/www.scientific.net/amr.1017.429.

IEEE

S. L. Chen, B. Shen, and F. H. Sun, “Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition,” Advanced materials research, vol. 1017, pp. 429–434, 2014, doi: 10.4028/www.scientific.net/amr.1017.429.

BibTeX

@article{chen2014long,
  title     = {{Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition}},
  author    = {Chen, Su Lin and Shen, Bin and Sun, Fang Hong},
  journal   = {Advanced materials research},
  year      = {2014},
  volume    = {1017},
  pages     = {429--434},
  doi       = {10.4028/www.scientific.net/amr.1017.429},
  url       = {https://doi.org/10.4028/www.scientific.net/amr.1017.429}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • diamond-like carbon
  • nanocrystalline diamond
  • water lubrication
  • friction coefficient
  • wear rate
  • boundary lubrication
  • sliding velocity
  • normal load

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Chen, S. L., Shen, B., & Sun, F. H. (2014). Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition. Advanced materials research, 1017, 429–434. https://doi.org/10.4028/www.scientific.net/amr.1017.429

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advanced materials research: sign in and open the full text from this page.

Who wrote this paper?

Su Lin Chen, Bin Shen, Fang Hong Sun.

What is the DOI of this paper?

10.4028/www.scientific.net/amr.1017.429, permanently at https://doi.org/10.4028/www.scientific.net/amr.1017.429. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.